相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Pharmaceutical Additive Manufacturing: a Novel Tool for Complex and Personalized Drug Delivery Systems
Jiaxiang Zhang et al.
AAPS PHARMSCITECH (2018)
Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets
Pamela Robles Martinez et al.
AAPS PHARMSCITECH (2018)
Reshaping drug development using 3D printing
Atheer Awad et al.
DRUG DISCOVERY TODAY (2018)
Personalisation of warfarin therapy using thermal ink-jet printing
Parameswara Rao Vuddanda et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
On demand manufacturing of patient-specific liquid capsules via coordinated 3D printing and liquid dispensing
Tochukwu C. Okwuosa et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Solubilisation behaviour of poorly water-soluble drugs during digestion of solid SMEDDS
Kapilkumar Vithani et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2018)
Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing
Qijun Li et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D extrusion printing of high drug loading immediate release paracetamol tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Fabricating 3D printed orally disintegrating printlets using selective laser sintering
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
PET/CT imaging of 3D printed devices in the gastrointestinal tract of rodents
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
Gayathri Kollamaram et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printed medicines: A new branch of digital healthcare
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printing of drug-loaded gyroid lattices using selective laser sintering
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D Printing Pharmaceuticals: Drug Development to Frontline Care
Sarah J. Trenfield et al.
TRENDS IN PHARMACOLOGICAL SCIENCES (2018)
3D printing of a wearable personalized oral delivery device: A first-in-human study
Kun Liang et al.
SCIENCE ADVANCES (2018)
3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach
Sarah J. Trenfield et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Printing T3 and T4 oral drug combinations as a novel strategy for hypothyroidism
Mustafa Alomari et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Recent development in 3D food printing
Fan Yang et al.
CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2017)
Fabricating a Shell-Core Delayed Release Tablet Using Dual FDM 3D Printing for Patient-Centred Therapy
Tochukwu C. Okwuosa et al.
PHARMACEUTICAL RESEARCH (2017)
Development of Novel 3-D Printed Scaffolds With Core-Shell Nanoparticles for Nerve Regeneration
Se-Jun Lee et al.
IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2017)
Inkjet printing of antiviral PCL nanoparticles and anticancer cyclodextrin inclusion complexes on bioadhesive film for cervical administration
Cem Varan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Patient-specific 3D scanned and 3D printed antimicrobial polycaprolactone wound dressings
Zaid Muwaffak et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Patient acceptability of 3D printed medicines
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Dropwise additive manufacturing of pharmaceutical products for amorphous and self emulsifying drug delivery systems
Elcin Icten et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Selective laser sintering (SLS) 3D printing of medicines
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Fabrication of drug-loaded hydrogels with stereolithographic 3D printing
Pamela Robles Martinez et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
3D printed tablets loaded with polymeric nanocapsules: An innovative approach to produce customized drug delivery systems
R. C. R. Beck et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
3D printed multi-compartment capsular devices for two-pulse oral drug delivery
A. Maroni et al.
JOURNAL OF CONTROLLED RELEASE (2017)
3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release
Mary Kyobula et al.
JOURNAL OF CONTROLLED RELEASE (2017)
Anti-tuberculosis drug combination for controlled oral delivery using 3D printed compartmental dosage forms: From drug product design to in vivo testing
Natalja Genina et al.
JOURNAL OF CONTROLLED RELEASE (2017)
Fabrication and tissue engineering application of a 3D PPF/DEF scaffold using Blu-ray based 3D printing system
Jae-Hun Kim et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Printed Drug-Delivery Systems for Improved Patient Treatment (vol 37, pg 1070, 2016)
Niklas Sandler et al.
TRENDS IN PHARMACOLOGICAL SCIENCES (2017)
3D metal droplet printing development and advanced materials additive manufacturing
Lawrence E. Murr et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2017)
3D Printing technologies for drug delivery: a review
Leena Kumari Prasad et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2016)
Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices
Natalja Genina et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Jie Wang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Adaptation of pharmaceutical excipients to FDM 3D printing for the fabrication of patient-tailored immediate release tablets
Muzna Sadia et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems
Alvaro Goyanes et al.
JOURNAL OF CONTROLLED RELEASE (2016)
3d printing technologies applied for food design: Status and prospects
Fernanda C. Godoi et al.
JOURNAL OF FOOD ENGINEERING (2016)
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Mohamed A. Alhnan et al.
PHARMACEUTICAL RESEARCH (2016)
3D Metal Printing Technology
Thomas Duda et al.
IFAC PAPERSONLINE (2016)
Biomimetic 3D tissue printing for soft tissue regeneration
Falguni Pati et al.
BIOMATERIALS (2015)
Printing cell-laden gelatin constructs by free-form fabrication and enzymatic protein crosslinking
Scott A. Irvine et al.
BIOMEDICAL MICRODEVICES (2015)
Photopatterning of Hydrogel Scaffolds Coupled to Filter Materials Using Stereolithography for Perfused 3D Culture of Hepatocytes
Jaclyn A. Shepard Neiman et al.
BIOTECHNOLOGY AND BIOENGINEERING (2015)
3D printing in dentistry
A. Dawood et al.
BRITISH DENTAL JOURNAL (2015)
Microsphere-based selective laser sintering for building macroporous bone scaffolds with controlled microstructure and excellent biocompatibility
Yingying Du et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2015)
Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
Justyna Skowyra et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Alvaro Goyanes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
A flexible-dose dispenser for immediate and extended release 3D printed tablets
Katarzyna Pietrzak et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Personalised dosing: Printing a dose of one's own medicine
Mustafa Alomari et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of tablets containing multiple drugs with defined release profiles
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Effect of geometry on drug release from 3D printed tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Inkjet printing for pharmaceutics - A review of research and manufacturing
Ronan Daly et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
Shaban A. Khaled et al.
JOURNAL OF CONTROLLED RELEASE (2015)
3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
Alice Melocchi et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2015)
Review: Polymeric-Based 3D Printing for Tissue Engineering
Geng-Hsi Wu et al.
JOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING (2015)
Dropwise Additive Manufacturing of Pharmaceutical Products for Melt-Based Dosage Forms
Elcin Icten et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Three-Dimensional Printing of Drug-Eluting Implants: Preparation of an Antimicrobial Polylactide Feedstock Material
Jorrit Jeroen Water et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Alvaro Goyanes et al.
MOLECULAR PHARMACEUTICS (2015)
Selective laser sintering manufacturing of polycaprolactone bone scaffolds for applications in bone tissue engineering
Alida Mazzoli et al.
RAPID PROTOTYPING JOURNAL (2015)
Continuous liquid interface production of 3D objects
John R. Tumbleston et al.
SCIENCE (2015)
3D bioprinting: A new insight into the therapeutic strategy of neural tissue regeneration
Fu-Yu Hsieh et al.
ORGANOGENESIS (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
A Review on 3D Printing for Customized Food Fabrication
Jie Sun et al.
43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43 (2015)
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Bethany C. Gross et al.
ANALYTICAL CHEMISTRY (2014)
Fused-filament 3D printing (3DP) for fabrication of tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Towards fabrication of 3D printed medical devices to prevent biofilm formation
Niklas Sandler et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
3-dimensional (3D) fabricated polymer based drug delivery systems
Simon E. Moulton et al.
JOURNAL OF CONTROLLED RELEASE (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Surface modification of polycaprolactone scaffolds fabricated via selective laser sintering for cartilage tissue engineering
Chih-Hao Chen et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Preparing the ground for tissue regeneration: from mechanism to therapy
Stuart J. Forbes et al.
NATURE MEDICINE (2014)
Rapid and Low-cost Prototyping of Medical Devices Using 3D Printed Molds for Liquid Injection Molding
Philip Chung et al.
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS (2014)
Lipid-based formulations for oral administration of poorly water-soluble drugs
Huiling Mu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)
Crystallization and Dissolution Behavior of Naproxen/Polyethylene Glycol Solid Dispersions
Qing Zhu et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2013)
Three-dimensional drug printing: A structured review
Iulia Ursan et al.
JOURNAL OF THE AMERICAN PHARMACISTS ASSOCIATION (2013)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
3D Printing and Neurosurgery-Ready for Prime Time?
Geraldine T. Klein et al.
WORLD NEUROSURGERY (2013)
New World of 3-D Printing Offers Completely New Ways of Thinking
Leslie Mertz et al.
IEEE PULSE (2013)
Inkjet printed antibiotic- and calcium-eluting bioresorbable nanocomposite micropatterns for orthopedic implants
Yexin Gu et al.
ACTA BIOMATERIALIA (2012)
Fabrication of drug-loaded polymer microparticles with arbitrary geometries using a piezoelectric inkjet printing system
Byung Kook Lee et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
Extrusion printed polymer structures: A facile and versatile approach to tailored drug delivery platforms
Parawee Rattanakit et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
Laura Elomaa et al.
ACTA BIOMATERIALIA (2011)
Let there be chip-towards rapid prototyping of microfluidic devices: one-step manufacturing processes
Ansgar Waldbaur et al.
ANALYTICAL METHODS (2011)
Nanosuspensions as advanced printing ink for accurate dosing of poorly soluble drugs in personalized medicines
Jana Pardeike et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Inkjet printing as a novel medicine formulation technique
Nikolaos Scoutaris et al.
JOURNAL OF CONTROLLED RELEASE (2011)
Inkjet Printing of Drug Substances and Use of Porous Substrates-Towards Individualized Dosing
Niklas Sandler et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2011)
Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing
Asma B. M. Buanz et al.
PHARMACEUTICAL RESEARCH (2011)
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Karina Arcaute et al.
ACTA BIOMATERIALIA (2010)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(D,L-lactide)-based resins
Tetsu M. Seck et al.
JOURNAL OF CONTROLLED RELEASE (2010)
Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation
Vincent Chan et al.
LAB ON A CHIP (2010)
3D printing based on imaging data: review of medical applications
F. Rengier et al.
INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2010)
A novel fast disintegrating tablet fabricated by three-dimensional printing
Deng-Guang Yu et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2009)
Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
Phung Xuan Lan et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2009)
The controlled-releasing drug implant based on the three dimensional printing technology: Fabrication and properties of drug releasing in vivo
Wu Weigang et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2009)
Development of nano- and microscale composite 3D scaffolds using PPF/DEF-HA and micro-stereolithography
Jin Woo Lee et al.
MICROELECTRONIC ENGINEERING (2009)
Formulation of lipid-based delivery systems for oral administration: Materials, methods and strategies
Colin W. Pouton et al.
ADVANCED DRUG DELIVERY REVIEWS (2008)
Effect of binder content on the material properties of polymethyl methacrylate fabricated by three dimensional printing technique
R. Patirupanusara et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Three-dimensional printing in pharmaceutics: Promises and problems
Deng Guang Yu et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2008)
Additive Processing of Polymers
Bettina Wendel et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2008)
Ceramic components manufacturing by selective laser sintering
Ph. Bertrand et al.
APPLIED SURFACE SCIENCE (2007)
The application of ink-jet technology for the coating and loading of drug-eluting stents
Peter J. Tarcha et al.
ANNALS OF BIOMEDICAL ENGINEERING (2007)
Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices
Uwe Gbureck et al.
JOURNAL OF CONTROLLED RELEASE (2007)
Tablets with material gradients fabricated by three-dimensional printing
Deng Guang Yu et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2007)
Levofloxacin implants with predefined microstructure fabricated by three-dimensional printing technique
Weidong Huang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
Poly-epsilon-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering
F. E. Wiria et al.
ACTA BIOMATERIALIA (2007)
Lipids and lipid-based formulations: optimizing the oral delivery of lipophilic drugs
Christopher J. H. Porter et al.
NATURE REVIEWS DRUG DISCOVERY (2007)
Formulation of poorly water-soluble drugs for oral administration: Physicochemical and physiological issues and the lipid formulation classification system
Colin W. Pouton
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2006)
Influence of layer thickness on mechanical properties in stereolithography
K. Chockalingam et al.
RAPID PROTOTYPING JOURNAL (2006)
Fundamentals of selective laser melting of alloyed steel powders
M. Rombouts et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells
Karina Arcaute et al.
ANNALS OF BIOMEDICAL ENGINEERING (2006)
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
JM Williams et al.
BIOMATERIALS (2005)
Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering
H Seitz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Layered manufacturing technologies
S McMains
COMMUNICATIONS OF THE ACM (2005)
Laser stereolithography and supercritical fluid processing or custom-designed implant fabrication
VK Popov et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2004)
A fast flexible ink-jet printing method for patterning dissociated neurons in culture
NE Sanjana et al.
JOURNAL OF NEUROSCIENCE METHODS (2004)
Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends
KH Tan et al.
BIOMATERIALS (2003)
Characterization of microfeatures in selective laser sintered drug delivery devices
CM Cheah et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2002)
Computer aided decision support for fused deposition modeling
CW Ziemian et al.
RAPID PROTOTYPING JOURNAL (2001)
Characterization of SLS parts for drug delivery devices
KH Low et al.
RAPID PROTOTYPING JOURNAL (2001)
Fabrication of porous polymeric matrix drug delivery devices using the selective laser sintering technique
KF Leong et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2001)
Lipid formulations for oral administration of drugs: non-emulsifying, self-emulsifying and 'self-microemulsifying' drug delivery systems
CW Pouton
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2000)
Oral dosage forms fabricated by Three Dimensional Printing™
WE Katstra et al.
JOURNAL OF CONTROLLED RELEASE (2000)
Multimechanism oral dosage forms fabricated by three dimensional printing™
CW Rowe et al.
JOURNAL OF CONTROLLED RELEASE (2000)
分享论文
