期刊
JOURNAL OF THEORETICAL AND APPLIED MECHANICS
卷 56, 期 4, 页码 1055-1068出版社
POLISH SOC THEORETICAL & APPLIED MECHANICS
DOI: 10.15632/jtam-pl.56.4.1055
关键词
creep and tensile tests; metals and alloys; scanning electron microscopy; numerical calculations; mechanical properties
类别
资金
- Ministry of Science and Higher Education of Poland [S/WM/4/2017]
- Bialystok University of Technology
This paper presents results of monotonic tensile and creep tests conducted on typical Al-Cu-Mg alloy (commercial 2024) specimens. Tensile tests carried out at room (20 degrees C) and elevated (100 degrees C, 200 degrees C, 300 degrees C) temperatures made it possible to determine strength properties of the material (Young's modulus, yield stress, ultimate tensile strength). Creep tests were performed at elevated temperature (100 degrees C, 200 degrees C and 300 degrees C) with a constant force. In order to obtain material creep characteristics, creep-rupture tests were carried out. Then creep tests were conducted with two different strain values: one corresponding to the beginning of the secondary creep and the other corresponding to a certain value of the tertiary creep. After preliminary creep deformation at two various strain levels, specimens were cooled at ambient temperature and then subjected to monotonic tensile tests. The characteristics of the material were obtained for pre-strained specimens at different temperatures. Specimens fracture surfaces obtained as a result of tensile (at elevated and room temperature), creep and combined tests were analyzed.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据