相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Additive Manufacturing of Metallic Materials: A Review
Yi Zhang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Recrystallization Behavior and Super-Elasticity of a Metastable beta-Type Ti-21Nb-7Mo-4Sn Alloy During Cold Rolling and Annealing
Siyao Lu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Corrosion and Mechanical Degradation of Ni-Ti Superelastic Alloy in Neutral Fluoride Solution
Toshio Ogawa et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Microstructure and properties of beta Ti-Nb alloy prepared by powder metallurgy route using titanium hydride powder
Bhupendra Sharma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Influence of Nb on the β → α martensitic phase transformation and properties of the newly designed Ti-Fe-Nb alloys
Shima Ehtemam-Haghighi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Characterization and biological evaluation of silver containing fluoroapatite nanoparticles prepared through microwave synthesis
Nida Iqbal et al.
CERAMICS INTERNATIONAL (2015)
Phase Stability and Stress-Induced Transformations in Beta Titanium Alloys
R. Prakash Kolli et al.
JOM (2015)
Sintering behavior and mechanical properties of a metal injection molded Ti-Nb binary alloy as biomaterial
Dapeng Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Microstructure, mechanical properties and superelasticity of biomedical porous NiTi alloy prepared by microwave sintering
J. L. Xu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Martensitic Transformation and Superelastic Properties of Ti-Nb Base Alloys
Hee Young Kim et al.
MATERIALS TRANSACTIONS (2015)
Metallurgical and mechanical properties of Ti-24Nb-4Zr-8Sn alloy fabricated by metal injection molding
Firat Kafkas et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
The role of Sn doping in the β-type Ti-25 at%Nb alloys: Experiment and ab initio calculations
J. J. Gutierrez-Moreno et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Fabrication of Ti-Nb-Ag alloy via powder metallurgy for biomedical applications
Ming Wen et al.
MATERIALS & DESIGN (2014)
Mechanical and bio-corrosion properties of quaternary Mg-Ca-Mn-Zn alloys compared with binary Mg-Ca alloys
H. R. Bakhsheshi-Rad et al.
MATERIALS & DESIGN (2014)
Fabrication of Ti-Nb alloys by powder metallurgy process and their shape memory characteristics
A. Terayama et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
On the mechanical properties of TiNb based alloys
Y. Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Effect of various metallic salts on antibacterial activity and physical properties of cotton fabrics
M. Ghoranneviss et al.
JOURNAL OF INDUSTRIAL TEXTILES (2013)
Microstructure and mechanical behavior of metal injection molded Ti-Nb binary alloys as biomedical material
Dapeng Zhao et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Effects of Sn content on the microstructure, mechanical properties and biocompatibility of Ti-Nb-Sn/hydroxyapatite biocomposites synthesized by powder metallurgy
Xiaopeng Wang et al.
MATERIALS & DESIGN (2013)
Effect of Aging on Microstructure and Shape Memory Properties of a Ni-48Ti-25Pd (At. Pct) Alloy
Taisuke T. Sasaki et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Corrosion behavior of a friction stir processed rare-earth added magnesium alloy
G. R. Argade et al.
CORROSION SCIENCE (2012)
Formation of alloys in the Ti-Nb system by hydride cycle method and synthesis of their hydrides in self-propagating high-temperature synthesis
A. G. Aleksanyan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Antibacterial performance of TiO2 ultrafine nanopowder synthesized by a chemical vapor condensation method: Effect of synthesis temperature and precursor vapor concentration
Yeon Seok Kim et al.
POWDER TECHNOLOGY (2012)
Mechanical Properties of Porous Ti-Mo and Ti-Nb Alloys for Biomedical Application by Gelcasting
Donghua Yang et al.
IUMRS INTERNATIONAL CONFERENCE IN ASIA 2011 (2012)
Niobium based coatings for dental implants
G. Ramirez et al.
APPLIED SURFACE SCIENCE (2011)
Effects of Sn and Zr on the Microstructure and Mechanical Properties of Ti-Ta-Based Shape Memory Alloys
Y. X. Tong et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)
Martensitic transformation and shape memory properties of Ti-Ta-Sn high temperature shape memory alloys
Hee Young Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
ALLOYS OF THE Ti-Si-Sn SYSTEM (TITANIUM CORNER): PHASE EQUILIBRIA, STRUCTURE, AND MECHANICAL PROPERTIES
I. D. Gorna et al.
POWDER METALLURGY AND METAL CERAMICS (2011)
Novel β-TiTaAl alloys with excellent cold workability and a stable high-temperature shape memory effect
Pio John S. Buenconsejo et al.
SCRIPTA MATERIALIA (2011)
Microwave versus conventional sintering: A review of fundamentals, advantages and applications
Morteza Oghbaei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Advances in Porous Biomaterials for Dental and Orthopaedic Applications
Meenakshi Mour et al.
MATERIALS (2010)
Porous TiNbZr alloy scaffolds for biomedical applications
Xiaojian Wang et al.
ACTA BIOMATERIALIA (2009)
Effect of ternary alloying elements on the shape memory behavior of Ti-Ta alloys
Pio John S. Buenconsejo et al.
ACTA MATERIALIA (2009)
Self-accommodation in Ti-Nb shape memory alloys
Y. W. Chai et al.
ACTA MATERIALIA (2009)
Prospects of microwave processing: An overview
S. Das et al.
BULLETIN OF MATERIALS SCIENCE (2009)
Ti based biomaterials, the ultimate choice for orthopaedic implants - A review
M. Geetha et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Mechanical properties and bioactive surface modification via alkali-heat treatment of a porous Ti-18Nb-4Sn alloy for biomedical applications
Jianyu Xiong et al.
ACTA BIOMATERIALIA (2008)
Porous NiTi for bone implants: A review
A. Bansiddhi et al.
ACTA BIOMATERIALIA (2008)
Phase stability and elastic modulus of Ti alloys containing Nb, Zr, and/or Sn from first-principles calculations
Qing-Miao Hu et al.
APPLIED PHYSICS LETTERS (2008)
Metallic biomaterials
Mitsuo Niinomi
JOURNAL OF ARTIFICIAL ORGANS (2008)
The role of Sn and Ti additions in the microstructure of Nb-18Si base alloys
N. Vellios et al.
INTERMETALLICS (2007)
Fabrication methods of porous metals for use in orthopaedic applications
G Ryan et al.
BIOMATERIALS (2006)
Martensitic transformation, shape memory effect and superelasticity of Ti-Nb binary alloys
H. Y. Kim et al.
ACTA MATERIALIA (2006)
Corrosion resistance and biocompatibility of Ti-Ta alloys for biomedical applications
YL Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Beta TiNbSn alloys with low young's modulus and high strength
H Matsumoto et al.
MATERIALS TRANSACTIONS (2005)
Beta Ti alloys with low Young's modulus
T Ozaki et al.
MATERIALS TRANSACTIONS (2004)
Effect of replacement of V by Nb and Fe on the electrochemical and corrosion behavior of Ti-6Al-4V in simulated physiological environment
A Choubey et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2004)
Stress shielding and bone resorption in shoulder arthroplasty
J Nagels et al.
JOURNAL OF SHOULDER AND ELBOW SURGERY (2003)
Structure-property relationship of cast Ti-Nb alloys
CM Lee et al.
JOURNAL OF ORAL REHABILITATION (2002)