相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Synthesis and characterization of divinyl-fumarate poly-ε-caprolactone for scaffolds with controlled architectures
Alfredo Ronca et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2018)
Chitosan-based hydrogels: From preparation to biomedical applications
Michelly C. G. Pella et al.
CARBOHYDRATE POLYMERS (2018)
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Soroosh Derakhshanfar et al.
BIOACTIVE MATERIALS (2018)
A Generalizable Strategy for the 3D Bioprinting of Hydrogels from Nonviscous Photo-crosslinkable Inks
Liliang Ouyang et al.
ADVANCED MATERIALS (2017)
Additive Manufacturing of Biomaterials, Tissues, and Organs
Amir A. Zadpoor et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Differentiation of adipose stem cells seeded towards annulus fibrosus cells on a designed poly(trimethylene carbonate) scaffold prepared by stereolithography
Sebastien B. G. Blanquer et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)
Phase-separated mixed-macromer hydrogel networks and scaffolds prepared by stereolithography
Magdalena A. Przeradzka et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Fabricating porous, photo-crosslinked poly(trimethylene carbonate) membranes using temperature-induced phase separation
Thijs Pasman et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Preparation and characterization of flexible and elastic porous tubular PTMC scaffolds for vascular tissue engineering
Z. Guo et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Micro-porous composite scaffolds of photo-crosslinked poly(trimethylene carbonate) and nano-hydroxyapatite prepared by low-temperature extrusion-based additive manufacturing
Mike A. Geven et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Bio-inks for 3D bioprinting: recent advances and future prospects
Ilze Donderwinkel et al.
POLYMER CHEMISTRY (2017)
Microfl uidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink
Cristina Colosi et al.
ADVANCED MATERIALS (2016)
Additive Manufacturing of a Photo-Cross-Linkable Polymer via Direct Melt Electrospinning Writing for Producing High Strength Structures
Fei Chen et al.
BIOMACROMOLECULES (2016)
Tough biodegradable mixed-macromer networks and hydrogels by photo-crosslinking in solution
Erwin Zant et al.
ACTA BIOMATERIALIA (2016)
Synthetic Biodegradable Hydrogels with Excellent Mechanical Properties and Good Cell Adhesion Characteristics Obtained by the Combinatorial Synthesis of Photo-Cross-Linked Networks
Erwin Zant et al.
BIOMACROMOLECULES (2016)
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Weitao Jia et al.
BIOMATERIALS (2016)
Tunable functional hydrogels formed from a versatile water-soluble chitosan
Congming Xiao et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)
Degradation behavior of, and tissue response to photo-crosslinked poly(trimethylene carbonate) networks
Jan J. Rongen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2016)
Tissue adhesives for meniscus tear repair: an overview of current advances and prospects for future clinical solutions
A. I. Bochynska et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2016)
Preparation of Designed Poly(trimethylene carbonate) Meniscus Implants by Stereolithography: Challenges in Stereolithography
Bas van Bochove et al.
MACROMOLECULAR BIOSCIENCE (2016)
Digital micromirror device (DMD)-based 3D printing of poly(propylene fumarate) scaffolds
Eric J. Mott et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Advances in three-dimensional bioprinting for hard tissue engineering
Sang-Hyug Park et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2016)
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Barbara J. Klotz et al.
TRENDS IN BIOTECHNOLOGY (2016)
Advances in three-dimensional bioprinting for hard tissue engineering
Sang-Hyug Park et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2016)
Citrate-Based Biomaterials and Their Applications in Regenerative Engineering
Richard T. Tran et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 45 (2015)
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Kan Yue et al.
BIOMATERIALS (2015)
A Combinatorial Photocrosslinking Method for the Preparation of Porous Structures with Widely Differing Properties
Erwin Zant et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2015)
Fabrication of patient specific composite orbital floor implants by stereolithography
Mike A. Geven et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2015)
Grafting a lubricious coating onto photo-crosslinked poly(trimethylene carbonate)
Bas van Bochove et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2015)
Melt Electrospinning and Its Technologization in Tissue Engineering
M. Lourdes Muerza-Cascante et al.
TISSUE ENGINEERING PART B-REVIEWS (2015)
Crosslinking biopolymers for biomedical applications
Narendra Reddy et al.
TRENDS IN BIOTECHNOLOGY (2015)
3D Printable Biophotopolymers for in Vivo Bone Regeneration
Guenter Russmueller et al.
MATERIALS (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks
Zongjie Wang et al.
BIOFABRICATION (2015)
A novel bioprinting method and system for forming hybrid tissue engineering constructs
Y. Shanjani et al.
BIOFABRICATION (2015)
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing
Gernot Hochleitner et al.
BIOFABRICATION (2015)
Immunocompatibility evaluation of hydrogel-coated polyimide implants for applications in regenerative medicine
Milada Sirova et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)
Stereolithography in tissue engineering
Shelby A. Skoog et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2014)
Biodegradable Photocrosslinkable Poly(depsipeptide-co-ε-caprolactone) for Tissue Engineering: Synthesis, Characterization, and In Vitro Evaluation
Laura Elomaa et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Development and characterization of hydrogels based on natural polysaccharides: Policaju and chitosan
Paulo A. G. Soares et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Biodegradable elastomers for biomedical applications and regenerative medicine
Erhan Bat et al.
REGENERATIVE MEDICINE (2014)
Preparation of a Designed Poly(trimethylene carbonate) Microvascular Network by Stereolithography
Sigrid Schuller-Ravoo et al.
ADVANCED HEALTHCARE MATERIALS (2014)
Preparation of designed poly(D,L-lactide)/nanosized hydroxyapatite composite structures by stereolithography
A. Ronca et al.
ACTA BIOMATERIALIA (2013)
A Highly Tunable Biocompatible and Multifunctional Biodegradable Elastomer
Maria Jose Nunes Pereira et al.
ADVANCED MATERIALS (2013)
Biodegradable chitosan nanogels crosslinked with genipin
Maite Arteche Pujana et al.
CARBOHYDRATE POLYMERS (2013)
Flexible and Elastic Scaffolds for Cartilage Tissue Engineering Prepared by Stereolithography Using Poly(trimethylene carbonate)-Based Resins
Sigrid Schuller-Ravoo et al.
MACROMOLECULAR BIOSCIENCE (2013)
Hydrolysis behaviour of crosslinked poly(ester anhydride) networks prepared from functionalised poly(epsilon-caprolactone) precursors
Risto A. Hakala et al.
REACTIVE & FUNCTIONAL POLYMERS (2013)
Electrospinning and additive manufacturing: converging technologies
Paul D. Dalton et al.
BIOMATERIALS SCIENCE (2013)
Photo-crosslinked biodegradable elastomers for controlled nitric oxide delivery
Ying Wang et al.
BIOMATERIALS SCIENCE (2013)
Release of Magnetic Nanoparticles from Cell-Encapsulating Biodegradable Nanobiomaterials
Feng Xu et al.
ACS NANO (2012)
Photo-crosslinked networks prepared from fumaric acid monoethyl ester-functionalized poly(D,L-lactic acid) oligomers and N-vinyl-2-pyrrolidone for the controlled and sustained release of proteins
Janine Jansen et al.
ACTA BIOMATERIALIA (2012)
Flexible, elastic and tear-resistant networks prepared by photo-crosslinking poly(trimethylene carbonate) macromers
S. Schuller-Ravoo et al.
ACTA BIOMATERIALIA (2012)
Visible light crosslinkable chitosan hydrogels for tissue engineering
Junli Hu et al.
ACTA BIOMATERIALIA (2012)
Lithography-Based Additive Manufacturing of Cellular Ceramic Structures
Ruth Felzmann et al.
ADVANCED ENGINEERING MATERIALS (2012)
Functional Human Vascular Network Generated in Photocrosslinkable Gelatin Methacrylate Hydrogels
Ying-Chieh Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-Laser-Writing Optical Lithography
Tiemo Bueckmann et al.
ADVANCED MATERIALS (2012)
Photo-Cross-Linked Poly(ethylene carbonate) Elastomers: Synthesis, in Vivo Degradation, and Determination of in Vivo Degradation Mechanism
L. A. Cornacchione et al.
BIOMACROMOLECULES (2012)
Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography
Robert Gauvin et al.
BIOMATERIALS (2012)
Photocrosslinked poly(ester anhydride)s for peptide delivery: Effect of oligomer hydrophobicity on PYY3-36 delivery
Juha Monkare et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2012)
Design and characterization of antitumor drug paclitaxel-loaded chitosan nanoparticles by W/O emulsions
Juan Xu et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2012)
Resilient Amorphous Networks Prepared by Photo-Crosslinking High-Molecular-Weight D,L-Lactide and Trimethylene Carbonate Macromers: Mechanical Properties and Shape-Memory Behavior
Shahriar Sharifi et al.
MACROMOLECULAR BIOSCIENCE (2012)
Photo-Crosslinked Biodegradable Hydrogels Prepared From Fumaric Acid Monoethyl Ester-Functionalized Oligomers for Protein Delivery
Janine Jansen et al.
MACROMOLECULAR BIOSCIENCE (2012)
Processing of 45S5 Bioglass® by lithography-based additive manufacturing
Passakorn Tesavibul et al.
MATERIALS LETTERS (2012)
Synthesis, properties and biomedical applications of poly(glycerol sebacate) (PGS): A review
Ranjana Rai et al.
PROGRESS IN POLYMER SCIENCE (2012)
Polymeric microstructures with shape-memory properties for biomedical use built by stereolithography
Shahriar Sharifi et al.
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2012)
Development of poly(trimethylene carbonate) network implants for annulus fibrosus tissue engineering
Sebastien B. G. Blanquer et al.
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2012)
Design of porous three-dimensional PDLLA/nano-hap composite scaffolds using stereolithography
Alfredo Ronca et al.
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2012)
Continuous digital light processing (cDLP): Highly accurate additive manufacturing of tissue engineered bone scaffolds This paper highlights the main issues regarding the application of Continuous Digital Light Processing (cDLP) for the production of highly accurate PPF scaffolds with layers as thin as 60 μm for bone tissue engineering
David Dean et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2012)
Resorbable elastomeric networks prepared by photocrosslinking of high-molecular-weight poly(trimethylene carbonate) with photoinitiators and poly(trimethylene carbonate) macromers as crosslinking aids
Erhan Bat et al.
ACTA BIOMATERIALIA (2011)
Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
Laura Elomaa et al.
ACTA BIOMATERIALIA (2011)
Synthesis and characterization of photocrosslinkable gelatin and silk fibroin interpenetrating polymer network hydrogels
Wenqian Xiao et al.
ACTA BIOMATERIALIA (2011)
Direct Writing By Way of Melt Electrospinning
Toby D. Brown et al.
ADVANCED MATERIALS (2011)
Photo-Cross-Linked Biodegradable Poly(Ester Anhydride) Networks Prepared from Alkenylsuccinic Anhydride Functionalized Poly(ε-caprolactone) Precursors
Risto A. Hakala et al.
BIOMACROMOLECULES (2011)
Photopolymerized water-soluble chitosan-based hydrogel as potential use in tissue engineering
Yingshan Zhou et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2011)
Preparation of Flexible and Elastic Poly(trimethylene carbonate) Structures by Stereolithography
Sigrid Schuller-Ravoo et al.
MACROMOLECULAR BIOSCIENCE (2011)
The Materials Challenge in Diffraction-Unlimited Direct-Laser-Writing Optical Lithography
Joachim Fischer et al.
ADVANCED MATERIALS (2010)
Functional Assessment of Cross-Linked Porous Gelatin Hydrogels for Bioengineered Cell Sheet Carriers
Jui-Yang Lai et al.
BIOMACROMOLECULES (2010)
Ultraviolet light crosslinking of poly(trimethylene carbonate) for elastomeric tissue engineering scaffolds
Erhan Bat et al.
BIOMATERIALS (2010)
Cell-laden microengineered gelatin methacrylate hydrogels
Jason W. Nichol et al.
BIOMATERIALS (2010)
Bioactive modification of poly(ethylene glycol) hydrogels for tissue engineering
Junmin Zhu
BIOMATERIALS (2010)
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Injectable hydrogels based on chitosan derivative/polyethylene glycol dimethacrylate/N,N-dimethylacrylamide as bone tissue engineering matrix
Guiping Ma et al.
CARBOHYDRATE POLYMERS (2010)
Osmotically driven protein release from photo-cross-linked elastomers of poly(trimethylene carbonate) and poly(trimethylene carbonate-CO-D,L-lactide)
R. Chapanian et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2010)
Citric-Acid-Derived Photo-Cross-Linked Biodegradable Elastomers
Dipendra Gyawali et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2010)
Combined and sequential delivery of bioactive VEGF165 and HGF from poly (trimethylene carbonate) based photo-cross-linked elastomers
R. Chapanian et al.
JOURNAL OF CONTROLLED RELEASE (2010)
Biocompatible photocrosslinked poly(ester anhydride) based on functionalized poly (ε-caprolactone) prepolymer shows surface erosion controlled drug release in vitro and in vivo
J. Monkare et al.
JOURNAL OF CONTROLLED RELEASE (2010)
Rapid photo-crosslinking of fumaric acid monoethyl ester-functionalized poly(trimethylene carbonate) oligomers for drug delivery applications
Janine Jansen et al.
JOURNAL OF CONTROLLED RELEASE (2010)
Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(D,L-lactide)-based resins
Tetsu M. Seck et al.
JOURNAL OF CONTROLLED RELEASE (2010)
Photo-Cross-Linked Poly(DL-lactide)-Based Networks. Structural Characterization by HR-MAS NMR Spectroscopy and Hydrolytic Degradation Behavior
Ferry P. W. Melchels et al.
MACROMOLECULES (2010)
Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting
Aleksander Skardal et al.
TISSUE ENGINEERING PART A (2010)
Tissue Response to, and Degradation Rate of, Photocrosslinked Trimethylene Carbonate-Based Elastomers Following Intramuscular Implantation
Laurianne Timbart et al.
MATERIALS (2010)
Fumaric Acid Monoethyl Ester-Functionalized Poly(D,L-lactide)/N-vinyl-2-pyrrolidone Resins for the Preparation of Tissue Engineering Scaffolds by Stereolithography
Janine Jansen et al.
BIOMACROMOLECULES (2009)
A poly(D,L-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Ferry P. W. Melchels et al.
BIOMATERIALS (2009)
The role of oxidation and enzymatic hydrolysis on the in vivo degradation of trimethylene carbonate based photocrosslinkable elastomers
Rafi Chapanian et al.
BIOMATERIALS (2009)
The effect of photopolymerization on stem cells embedded in hydrogels
Natalja E. Fedorovich et al.
BIOMATERIALS (2009)
Modulating the Mechanical Properties of Poly(diol citrates) via the Incorporation of a Second Type of Crosslink Network
Haichao Zhao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Gelatin-Based Photopolymers for Bone Replacement Materials
Monika Schuster et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2009)
(Meth)Acrylate-Based Photoelastomers as Tailored Biomaterials for Artificial Vascular Grafts
Stefan Baudis et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2009)
Vinyl Esters: Low Cytotoxicity Monomers for the Fabrication of Biocompatible 3D Scaffolds by Lithography Based Additive Manufacturing
Christian Heller et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2009)
Achieving λ/20 Resolution by One-Color Initiation and Deactivation of Polymerization
Linjie Li et al.
SCIENCE (2009)
Effect of macromer molecular weight on in vitro ophthalmic drug release from photo-crosslinked matrices
A. Haesslein et al.
ACTA BIOMATERIALIA (2008)
In vitro study of hydroxyapatite-based photocurable polymer composites prepared by laser stereolithography and supercritical fluid extraction
John J. A. Barry et al.
ACTA BIOMATERIALIA (2008)
Free-radical-mediated protein inactivation and recovery during protein photoencapsulation
Chien-Chi Lin et al.
BIOMACROMOLECULES (2008)
Biodegradable and radically polymerized elastomers with enhanced processing capabilities
Jamie L. Ifkovits et al.
BIOMEDICAL MATERIALS (2008)
Adhesive biomaterials for tissue reconstruction
Antonio Lauto et al.
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2008)
Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography
J. Stampfl et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
A biodegradable and biocompatible gecko-inspired tissue adhesive
Alborz Mahdavi et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)
3D-shaping of biodegradable photopolymers for hard tissue replacement
Monika Schuster et al.
APPLIED SURFACE SCIENCE (2007)
Photopolymers for rapid prototyping
R. Liska et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2007)
A porous photocurable elastomer for cell encapsulation and culture
Sharon Gerecht et al.
BIOMATERIALS (2007)
Synthesis and characterization of photocurable elastomers from poly(glycerol-co-sebacate)
Christiaan L. E. Nijst et al.
BIOMACROMOLECULES (2007)
Review: Photopolymerizable and degradable biomaterials for tissue engineering applications
Jamie L. Ifkovits et al.
TISSUE ENGINEERING (2007)
Maintenance of vascular endothelial growth factor and potentially other therapeutic proteins bioactivity during a photo-initiated free radical cross-linking reaction forming biodegradable elastomers
Frank Gu et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2007)
Sustained release of bioactive therapeutic proteins from a biodegradable elastomeric device
Frank Gu et al.
JOURNAL OF CONTROLLED RELEASE (2007)
Curable, biodegradable elastomers: emerging biomaterials for drug delivery and tissue engineering
Brian Amsden
SOFT MATTER (2007)
Poly(propylene fumarate) bone tissue engineering scaffold fabrication using stereolithography: Effects of resin formulations and laser parameters
Kee-Won Lee et al.
BIOMACROMOLECULES (2007)
Long-term release of fluocinolone acetonide using biodegradable fumarate-based polymers
A. Haesslein et al.
JOURNAL OF CONTROLLED RELEASE (2006)
A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds
Y Lu et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)
Photopolymerization of biomaterials: issues and potentialities in drug delivery, tissue engineering, and cell encapsulation applications
B Baroli
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2006)
The in vivo and in vitro degradation behavior of poly(trimethylene carbonate)
Z Zhang et al.
BIOMATERIALS (2006)
Extracellular matrix-like cell-adhesive hydrogels from RGD-containing poly(ethylene glycol) diacrylate
JM Zhu et al.
MACROMOLECULES (2006)
In vivo degradation behavior of photo-cross-linked star-poly(epsilon-caprolactone-co-D,L-lactide) elastomers
BG Amsden et al.
BIOMACROMOLECULES (2006)
Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells
Karina Arcaute et al.
ANNALS OF BIOMEDICAL ENGINEERING (2006)
Gelatin as a delivery vehicle for the controlled release of bioactive molecules
S Young et al.
JOURNAL OF CONTROLLED RELEASE (2005)
Laser-layered microfabrication of spatially patterned functionalized tissue-engineering scaffolds
G Mapili et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Preparation of biodegradable networks by photo-crosslinking lactide, ε-caprolactone and trimethylene carbonate-based oligomers functionalized with fumaric acid monoethyl ester
DW Grijpma et al.
BIOMATERIALS (2005)
Incorporation of tissue-specific molecules alters chondrocyte metabolism and gene expression in photocrosslinked hydrogels
SJ Bryant et al.
ACTA BIOMATERIALIA (2005)
Photocurable biodegradable liquid copolymers: Synthesis of acrylate-end-capped trimethylene carbonate-based prepolymers, photocuring, and hydrolysis
T Matsuda et al.
BIOMACROMOLECULES (2004)
Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography
B Dhariwala et al.
TISSUE ENGINEERING (2004)
In vitro degradation of three-dimensional porous poly(D,L-lactide-co-glycolide) scaffolds for tissue engineering
LB Wu et al.
BIOMATERIALS (2004)
Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems
DW Hutmacher et al.
TRENDS IN BIOTECHNOLOGY (2004)
Synthesis and characterization of a photo-cross-linked biodegradable elastomer
BG Amsden et al.
BIOMACROMOLECULES (2004)
Crosslinked poly(ester anhydride)s based on poly(ε-caprolactone) and polylactide oligomers
AO Helminen et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2003)
Enhanced mechanical properties of 1,3-trimethylene carbonate polymers and networks
AP Pêgo et al.
POLYMER (2003)
Force-controllable, optically driven micromachines fabricated by single-step two-photon micro stereolithography
S Maruo et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2003)
In vivo degradation characteristics of poly(glycerol sebacate)
YD Wang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2003)
Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs
KF Leong et al.
BIOMATERIALS (2003)
In vitro cytotoxicity of unsaturated oligo[poly(ethylene glycol) fumarate] macromers and their cross-linked hydrogels
H Shin et al.
BIOMACROMOLECULES (2003)
Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique
QP Hou et al.
BIOMATERIALS (2003)
Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth
MN Cooke et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2003)
Preparation of vinylated polysaccharides and photofabrication of tubular scaffolds as potential use in tissue engineering
T Matsuda et al.
BIOMACROMOLECULES (2002)
Liquid photocurable biodegradable copolymers:: In vivo degradation of photocured poly(ε-caprolactone-co-trimethylene carbonate)
M Mizutani et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Pharmacokinetic characterization 14C-vascular endothelial growth factor controlled release microspheres using a rat model
TK Kim et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2002)
A tough biodegradable elastomer
YD Wang et al.
NATURE BIOTECHNOLOGY (2002)
Synthesis, characterization and crosslinking of functional star-shaped poly(epsilon-caprolactone)
MPK Turunen et al.
POLYMER INTERNATIONAL (2002)
Hydrogel properties influence ECM production by chondrocytes photoencapsulated in poly(ethylene glycol) hydrogels
SJ Bryant et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
The design of scaffolds for use in tissue engineering. Part 1. Traditional factors
SF Yang et al.
TISSUE ENGINEERING (2001)
Synthesis of polylactides in the presence of co-initiators with different numbers of hydroxyl groups
H Korhonen et al.
POLYMER (2001)
Development of poly-(D,L-lactide-coglycolide) microsphere formulations containing recombinant human vascular endothelial growth factor to promote local angiogenesis
JL Cleland et al.
JOURNAL OF CONTROLLED RELEASE (2001)
Biodegradable polymers for ocular drug delivery
H Kimura et al.
OPHTHALMOLOGICA (2001)
The effects of scaffold thickness on tissue engineered cartilage in photocrosslinked poly(ethylene oxide) hydrogels
SJ Bryant et al.
BIOMATERIALS (2001)
Synthesis of biodegradable poly(propylene fumarate) networks with poly(propylene fumarate)-diacrylate macromers as crosslinking agents and characterization of their degradation products
S He et al.
POLYMER (2001)
Scaffolds in tissue engineering bone and cartilage
DW Hutmacher
BIOMATERIALS (2000)
Protein instability in poly(lactic-co-glycolic acid) microparticles
M van de Weert et al.
PHARMACEUTICAL RESEARCH (2000)
Molecular design of photocurable liquid biodegradable copolymers. 1. Synthesis and photocuring characteristics
T Matsuda et al.
MACROMOLECULES (2000)
Biodegradable photo-crosslinked poly(ether-ester) networks for lubricious coatings
BS Kim et al.
BIOMATERIALS (2000)
Structural and rheological properties of methacrylamide modified gelatin hydrogels
AI Van den Bulcke et al.
BIOMACROMOLECULES (2000)