Exonuclease III (XthA) Enforces In Vivo DNA Cloning of Escherichia coli To Create Cohesive Ends

Escherichia coli has an ability to assemble DNA fragments with homologous overlapping sequences of 15 to 40 bp at each end. Several modified protocols have already been reported to improve this simple and useful DNA cloning technology. However, the molecular mechanism by which E. coli accomplishes such cloning is still unknown. In this study, we provide evidence that the in vivo cloning of E. coli is independent of both RecA and RecET recombinases but is dependent on XthA, a 3' to 5' exonuclease. Here, in vivo cloning of E. coli by XthA is referred to as in vivo E. coli cloning (iVEC). We also show that iVEC activity is reduced by deletion of the C-terminal domain of DNA polymerase I (PolA). Collectively, these results suggest the following mechanism of iVEC. First, XthA resects the 3' ends of linear DNA fragments that are introduced into E. coli cells, resulting in exposure of the single-stranded 5' overhangs. Then, the complementary single-stranded DNA ends hybridize each other, and gaps are filled by DNA polymerase I. Elucidation of the iVEC mechanism at the molecular level would further advance the development of in vivo DNA cloning technology. Already we have successfully demonstrated multiple-fragment assembly of up to seven fragments in combination with an effortless transformation procedure using a modified host strain for iVEC. IMPORTANCE Cloning of a DNA fragment into a vector is one of the fundamental techniques in recombinant DNA technology. Recently, an in vitro recombination system for DNA cloning was shown to enable the joining of multiple DNA fragments at once. Interestingly, E. coli potentially assembles multiple linear DNA fragments that are introduced into the cell. Improved protocols for this in vivo cloning have realized a high level of usability, comparable to that by in vitro recombination reactions. However, the mechanism of in vivo cloning is highly controversial. Here, we clarified the fundamental mechanism underlying in vivo cloning and also constructed a strain that was optimized for in vivo cloning. Additionally, we streamlined the procedure of in vivo cloning by using a single microcentrifuge tube.