相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Elliptic vibration-assisted cutting of fibre-reinforced polymer composites: Understanding the material removal mechanisms
Weixing Xu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
On the mechanics and material removal mechanisms of vibration-assisted cutting of unidirectional fibre-reinforced polymer composites
Weixing Xu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
A study of the diamond tool wear suppression mechanism in vibration-assisted machining of steel
XinQuan Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Analysis of a free machining α+β titanium alloy using conventional and ultrasonically assisted turning
Riaz Muhammad et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
An Experimental Investigation on the Machinability of Al2O3 in Vibration-Assisted Turning Using PCD Tool
S. Amini et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V
Sandip Patil et al.
ULTRASONICS (2014)
Thermally enhanced ultrasonically assisted machining of Ti alloy
Riaz Muhammad et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2014)
Manufacturing and measurement of freeform optics
F. Z. Fang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Review of diamond-cutting ferrous metals
Z. J. Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Wear behavior of natural diamond tool in cutting tungsten-based alloy
Yuanliang Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
An analysis of the surface generation mechanics of the elliptical vibration texturing process
Ping Guo et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
A model to predict the critical undeformed chip thickness in vibration-assisted machining of brittle materials
Xinquan Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Development of a tertiary motion generator for elliptical vibration texturing
Ping Guo et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2013)
Enhanced ultrasonically assisted turning of a β-titanium alloy
Agostino Maurotto et al.
ULTRASONICS (2013)
Fundamental Machining Characteristics of Ultrasonic Assisted Turning of Titanium Alloy Ti-6Al-4V
Y. Wu et al.
ADVANCES IN ABRASIVE TECHNOLOGY XVI (2013)
Fabrication of Surface Microtexture by Vibration Assisted Cutting
Jun Shimizu et al.
ADVANCES IN ABRASIVE TECHNOLOGY XVI (2013)
A review on the current research trends in ductile regime machining
Wee Keong Neo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Influence of material composition on ductile machining of tungsten carbide in elliptical vibration cutting
Jianguo Zhang et al.
EMERGING TECHNOLOGY IN PRECISION ENGINEERING XIV (2012)
Ultrasonic assisted Diamond Turning of Hardened Steel for Mould Manufacturing
Benjamin Bulla et al.
PROCEEDINGS OF PRECISION ENGINEERING AND NANOTECHNOLOGY (ASPEN2011) (2012)
A new through-feed centerless grinding technique using a surface grinder
W. Xu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
A new in-feed centerless grinding technique using a surface grinder
W. Xu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools
Xinquan Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Micro/nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting
Norikazu Suzuki et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2011)
Direct Machining of Micro Patterns on Nickel Alloy and Mold Steel by Vibration Assisted Cutting
Gi Dae Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2011)
Machining of micro-channels and pyramid patterns using elliptical vibration cutting
Gi Dae Kim et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
An approach based on tool mode control for surface roughness reduction in high-frequency vibration cutting
V. Ostasevicius et al.
JOURNAL OF SOUND AND VIBRATION (2010)
Mirror finishing of Co-Cr-Mo alloy using elliptical vibration cutting
YoungChan Song et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2010)
Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting
Chandra Nath et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Effect of dynamic response and displacement/stress amplitude on ultrasonic vibration cutting
Kei Harada et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
A study on ultrasonic elliptical vibration cutting of tungsten carbide
C. Nath et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
A study on the effect of tool nose radius in ultrasonic elliptical vibration cutting of tungsten carbide
Chandra Nath et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Precision machining of microstructures on electroless-plated NiP surface for molding glass components
Jiwang Yan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Machining of metal matrix composites: Effect of ceramic particles on residual stress, surface roughness and chip formation
A. Pramanik et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Machining characteristics of Inconel 718 using ultrasonic and high temperature-aided cutting
C. Y. Hsu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Review of vibration-assisted machining
D. E. Brehl et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)
Characteristics of ultrasonic vibration-assisted ductile mode cutting of tungsten carbide
K. Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Characteristics of chip formation in micro V-grooving using elliptical vibration cutting
Gi Dae Kim et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
An ultrasonic elliptical vibration cutting device for micro V-groove machining: Kinematical analysis and micro V-groove machining characteristics
Gi Dae Kim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Elliptical vibration cutting of tungsten alloy molds for optical glass parts
N. Suzuki et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Ultrasonic elliptical vibration transducer driven by single actuator and its application in precision cutting
Xun Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Ultrasonic assisted turning of an aluminium-based metal matrix composite reinforced with SiC particles
ZW Zhong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Recent advances in mechanical micromachining
D. Dornfeld et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
Key improvements in the machining of difficult-to-cut aerospace superalloys
EO Ezugwu
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Suppression of burrs in turning with ultrasonic elliptical vibration cutting
CX Ma et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Effect of lubrication and cutting parameters on ultrasonically assisted turning of Inconel 718
AV Mitrofanov et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Diamond turning of a metal matrix composite with ultrasonic vibrations
ZW Zhong et al.
MATERIALS AND MANUFACTURING PROCESSES (2005)
Development of 3 DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces
E Shamoto et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2005)
Ultrasonically assisted turning of aviation materials: simulations and experimental study
VI Babitsky et al.
ULTRASONICS (2004)
Study of ductile mode cutting in grooving of tungsten carbide with and without ultrasonic vibration assistance
K Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2004)
Material removal mechanisms in ultrasonic-assisted diamond turning of brittle materials
F Klocke et al.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2004)
Study of machining accuracy in ultrasonic elliptical vibration cutting
CX Ma et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Reduction of the sliding friction of metals by the application of longitudinal or transverse ultrasonic vibration
VC Kumar et al.
TRIBOLOGY INTERNATIONAL (2004)
The effect of tool nose radius in ultrasonic vibration cutting of hard metal
M Xiao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Micro-machining of optical glasses - A review of diamond-cutting glasses
FZ Fang et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2003)
Ultraprecision diamond turning of glass with ultrasonic vibration
J Gan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2003)
An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics
XM Wang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
An overview of the machinability of aeroengine alloys
EO Ezugwu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Ultrasonically assisted turning of aviation materials
VI Babitsky et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Vibration-assisted precision machining of steel with PCD tools
M Zhou et al.
MATERIALS AND MANUFACTURING PROCESSES (2003)
Analysis of chatter suppression in vibration cutting
M Xiao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Research on the influence of the cutting conditions on the surface microstructure of ultra-thin wall parts in ultrasonic vibration cutting
GF Gao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Research on the characteristics of the cutting force in the vibration cutting of a particle-reinforced metal matrix composites SiCp/Al
CS Liu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Research on the vibration cutting performance of particle reinforced metallic matrix composites SiCp/Al
B Zhao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Machining of composite materials
R Teti
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)
Development of ultrasonic elliptical vibration controller for elliptical vibration cutting
E Shamoto et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)
Sub-surface deformation in vibration cutting of copper
J Schmütz et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2001)
Ductile cutting of tungsten carbide
K Liu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Development of a practical ultrasonic vibration cutting tool system
M Jin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)