相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Simulation of metal cutting using the particle finite-element method and a physically based plasticity model
J. M. Rodriguez et al.
COMPUTATIONAL PARTICLE MECHANICS (2017)
Continuous chip formation in metal cutting processes using the Particle Finite Element Method (PFEM)
J. M. Rodriguez et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Parameters and contact models for DEM simulations of agricultural granular materials: A review
Jozef Horabik et al.
BIOSYSTEMS ENGINEERING (2016)
The particle finite element method (PFEM) in thermo-mechanical problems
J. M. Rodriguez et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2016)
A stabilized formulation with maximum entropy meshfree approximants for viscoplastic flow simulation in metal forming
F. Greco et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2015)
Recent advances in modelling of metal machining processes
P. J. Arrazola et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Simulation of cutting processes using mesh-free Lagrangian particle methods
Peter Eberhard et al.
COMPUTATIONAL MECHANICS (2013)
Application of material point methods for cutting process simulations
Ravindra Ambati et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
On some aspects of the CNEM implementation in 3D in order to simulate high speed machining or shearing
Lounes Illoul et al.
COMPUTERS & STRUCTURES (2011)
Finite element simulation of high-speed machining of titanium alloy (Ti-6Al-4V) based on ductile failure model
Guang Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
The use of volume of solid (VOS) approach in simulating metal cutting with chamfered and blunt tools
K. S. Al-Athel et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2011)
Application of the Nodal Integrated Finite Element Method to Cutting: a Preliminary Comparison with the Traditional FEM Approach
F. Greco et al.
MODELLING OF MACHINING OPERATIONS (2011)
A contact domain method for large deformation frictional contact problems. Part 1: Theoretical basis
J. Oliver et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2009)
A contact domain method for large deformation frictional contact problems. Part 2: Numerical aspects
S. Hartmann et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2009)
Thermo-mechanical contact problems on non-matching meshes
S. Hueeber et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2009)
A mortar-based frictional contact formulation for large deformations using Lagrange multipliers
M. Tur et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2009)
Using a signed distance function for the simulation of metal forming processes: Formulation of the contact condition and mesh adaptation. From a Lagrangian approach to an Eulerian approach
J. Bruchon et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2009)
Process Modeling in the Pharmaceutical Industry using the Discrete Element Method
William R. Ketterhagen et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2009)
Advances in the particle finite element method for the analysis of fluid-multibody interaction and bed erosion in free surface flows
Eugenio Onate et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2008)
Contact with friction in multi-material arbitrary Lagrangian-Eulerian formulations using X-FEM
Efrem Vitali et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2008)
Hardness-based flow stress for numerical simulation of hard machining AISI H13 tool steel
D. Umbrello et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Finite element simulation of conventional and high speed machining of Ti6Al4V alloy
Domenico Umbrello
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
SPH method applied to high speed cutting modelling
J. Limido et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2007)
Applications of the discrete element method in mechanical engineering
Florian Fleissner et al.
MULTIBODY SYSTEM DYNAMICS (2007)
Modeling bed erosion in free surface flows by the particle finite element method
Eugenio Onate et al.
ACTA GEOTECHNICA (2006)
A stabilized nodally integrated tetrahedral
M. A. Puso et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2006)
Dynamic material behavior modeling using internal state variable plasticity and its application in hard machining simulations
Y. B. Guo et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2006)
CBS-based stabilization in explicit solid dynamics
Jerzy Rojek et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2006)
Local maximum-entropy approximation schemes:: a seamless bridge between finite elements and meshfree methods
M Arroyo et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2006)
On the orthogonal subgrid scale pressure stabilization of finite deformation J2 plasticity
CA de Saracibar et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2006)
Stabilization of low-order mixed finite elements for the Stokes equations
PB Bochev et al.
SIAM JOURNAL ON NUMERICAL ANALYSIS (2006)
Frictionless 2D Contact formulations for finite deformations based on the mortar method
KA Fischer et al.
COMPUTATIONAL MECHANICS (2005)
Adaptive remeshing in large plastic strain with damage
H Borouchaki et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2005)
F-bar-based linear triangles and tetrahedra for finite strain analysis of nearly incompressible solids. Part I: formulation and benchmarking
EA deSouzaNeto et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2005)
An analysis of some mixed-enhanced finite element for plane linear elasticity
F Auricchio et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2005)
Finite calculus formulation for incompressible solids using linear triangles and tetrahedra
E Oñate et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2004)
A stabilized finite element method for the Stokes problem based on polynomial pressure projections
CR Dohrmann et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2004)
An eulerian finite-element model for determination of deformation state of a copper subjected to orthogonal cutting
A Raczy et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
An assessment of the average nodal volume formulation for the analysis of nearly incompressible solids under finite strains
FMA Pires et al.
COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING (2004)
The material point method in large strain engineering problems
Z Wieckowski
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)
On the finite element prediction of damage growth and fracture initiation in finitely deforming ductile materials
FMA Pires et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)
Recent trends in ALE formulation and its applications in solid mechanics
MS Gadala
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)
Contact in a multi-material Eulerian finite element formulation
DJ Benson et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)
Hardness-based flow stress and fracture models for numerical simulation of hard machining AISI 52100 bearing steel
D Umbrello et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
The particle finite element method:: a powerful tool to solve incompressible flows with free-surfaces and breaking waves
SR Idelsohn et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2004)
A stabilized formulation for incompressible plasticity using linear triangles and tetrahedra
M Chiumenti et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2004)
A stabilized formulation for incompressible elasticity using linear displacement and pressure interpolations
A Chiumenti et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2002)
A finite element model of high speed metal cutting with adiabatic shearing
M Baker et al.
COMPUTERS & STRUCTURES (2002)
On the mesh motion for ALE modeling of metal forming processes
MS Gadala et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2002)
Am averaged nodal deformation gradient linear tetrahedral element for large strain explicit dynamic applications
J Bonet et al.
COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING (2001)
Finite element analysis of the orthogonal metal cutting process
C Shet et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
分享论文
