Mechanical properties of a diamond-copper composite with high thermal conductivity

Using pressureless infiltration of copper into a bed of coarse (180 gm) diamond particles pre-coated with tungsten, a composite with a thermal conductivity of 720 W/(m K) was prepared. The bending strength and compression strength of the composite were measured as 380 MPa. As measured by sound velocity, the Young's modulus of the composite was 310 GPa. Model calculations of the thermal conductivity, the strength and elastic constants of the copper-diamond composite were carried out, depending on the size and volume fraction of filler particles. The coincidence of the values of bending strength and compressive strength and the relatively high deformation at failure (a few percent) characterize the fabricated diamond-copper composite as ductile. The properties of the composite are compared to the known analogues - metal matrix composites with a high thermal conductivity having a high content of filler particles (similar to 60 vol.%). In strength and ductility our composite is superior to diamond-metal composites with a coarse filler; in thermal conductivity it surpasses composites of SiC-Al, W-Cu and WC-Cu, and dispersion-strengthened copper. (C) 2015 Elsevier Ltd. All rights reserved.