相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Stability of Polymer Solar Cells
Mikkel Jorgensen et al.
ADVANCED MATERIALS (2012)
Controlled Conjugated Backbone Twisting for an Increased Open-Circuit Voltage while Having a High Short-Circuit Current in Poly(hexylthiophene) Derivatives
Sangwon Ko et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer
Letian Dou et al.
NATURE PHOTONICS (2012)
Inkjet-printed polymer-fullerene blends for organic electronic applications
M. Neophytou et al.
MICROELECTRONIC ENGINEERING (2012)
Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer-fullerene solar cells
Benjamin Schmidt-Hansberg et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Moving through the Phase Diagram: Morphology Formation in Solution Cast Polymer-Fullerene Blend Films for Organic Solar Cells
Benjamin Schmidt-Hansberg et al.
ACS NANO (2011)
Controlling Vertical Morphology within the Active Layer of Organic Photovoltaics Using Poly(3-hexylthiophene) Nanowires and Phenyl-C61-butyric Acid Methyl Ester
Andrew H. Rice et al.
ACS NANO (2011)
P3HT:PCBM, Best Seller in Polymer Photovoltaic Research
Minh Trung Dang et al.
ADVANCED MATERIALS (2011)
Inkjet printing of Al2O3 dots, lines, and films: From uniform dots to uniform films
Yeonjun Oh et al.
CURRENT APPLIED PHYSICS (2011)
All-Inkjet-Printed Organic Thin-Film Transistors with Silver Gate, Source/Drain Electrodes
Seungjun Chung et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2011)
Origin of size effect on efficiency of organic photovoltaics
Assaf Manor et al.
JOURNAL OF APPLIED PHYSICS (2011)
In situ measurement of power conversion efficiency and molecular ordering during thermal annealing in P3HT:PCBM bulk heterojunction solar cells
Neil D. Treat et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Inkjet Metrology II: Resolved Effects of Ejection Frequency, Fluidic Pressure, and Droplet Number on Reproducible Drop-on-Demand Dispensing
R. Michael Verkouteren et al.
LANGMUIR (2011)
Improved performance uniformity of inkjet printed n-channel organic field-effect transistors and complementary inverters
Kang-Jun Baeg et al.
ORGANIC ELECTRONICS (2011)
High performance bulk-heterojunction organic solar cells fabricated with non-halogenated solvent processing
Choong-Do Park et al.
ORGANIC ELECTRONICS (2011)
Influence of processing additives to nano-morphology and efficiency of bulk-heterojunction solar cells: A comparative review
Almantas Pivrikas et al.
SOLAR ENERGY (2011)
Polymeric solar cells based on P3HT:PCBM: Role of the casting solvent
Minh Trung Dang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Effect of blend composition in BisEH-PFDTBT:PC70BM solar cells
Anna Calabrese et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Film formation properties of inkjet printed poly(phenylene-ethynylene)-poly(phenylene-vinylene)s
Anke Teichler et al.
THIN SOLID FILMS (2011)
Combinatorial Screening of Polymer:Fullerene Blends for Organic Solar Cells by Inkjet Printing
Anke Teichler et al.
ADVANCED ENERGY MATERIALS (2011)
In Situ X-Ray Study of Drying-Temperature Influence on the Structural Evolution of Bulk-Heterojunction Polymer-Fullerene Solar Cells Processed by Doctor-Blading
Monamie Sanyal et al.
ADVANCED ENERGY MATERIALS (2011)
For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%
Yongye Liang et al.
ADVANCED MATERIALS (2010)
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Brian Derby
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Improving polymer transistor performance via morphology control
Hoi Nok Tsao et al.
CHEMICAL SOCIETY REVIEWS (2010)
Control of inkjet printed profiles by solvent-vapor annealing
Jong S. Park et al.
DISPLAYS (2010)
Characterization of drop-on-demand microdroplet printing
Jin Xin Zhou et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Highly Efficient Inkjet-Printed Organic Photovoltaic Cells
Jaewook Jung et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2010)
Enhanced reproducibility of inkjet printed organic thin film transistors based on solution processable polymer-small molecule blends
Marie-Beatrice Madec et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials
Jolke Perelaer et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Controlling Profiles of Polymer Dots by Switching between Evaporation and Condensation
Tadashi Kajiya et al.
LANGMUIR (2010)
Interplay of Processing, Morphological Order, and Charge-Carrier Mobility in Polythiophene Thin Films Deposited by Different Methods: Comparison of Spin-Cast, Drop-Cast, and Inkjet-Printed Films
Loke-Yuen Wong et al.
LANGMUIR (2010)
High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives
Seung Hun Eom et al.
ORGANIC ELECTRONICS (2010)
Effect of film thickness controlled by ink-jet printing method on the optical properties of an electroluminescent polymer
Meng Wang et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2010)
The development of nanoscale morphology in polymer: fullerene photovoltaic blends during solvent casting
Tao Wang et al.
SOFT MATTER (2010)
A new approach to the solvent system for inkjet-printed P3HT:PCBM solar cells and its use in devices with printed passive and active layers
Alexander Lange et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
The Role of Processing in the Fabrication and Optimization of Plastic Solar Cells
Jeffrey Peet et al.
ADVANCED MATERIALS (2009)
Inkjet printed LED based pH chemical sensor for gas sensing
Martina O'Toole et al.
ANALYTICA CHIMICA ACTA (2009)
Inkjet printing of light emitting quantum dots
Hanna M. Haverinen et al.
APPLIED PHYSICS LETTERS (2009)
Drying of thin film polymer solar cells
B. Schmidt-Hansberg et al.
EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS (2009)
On the effect of poly(3-hexylthiophene) regioregularity on inkjet printed organic solar cells
Claudia N. Hoth et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Influence of Fluid Physical Properties on Ink-Jet Printability
Daehwan Jang et al.
LANGMUIR (2009)
Droplet Tailoring Using Evaporative Inkjet Printing
Jolke Perelaer et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2009)
Polymer solar cell by blade coating
Yu-Han Chang et al.
ORGANIC ELECTRONICS (2009)
All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps
Frederik C. Krebs
ORGANIC ELECTRONICS (2009)
Multiparametric optimization of polymer solar cells: A route to reproducible high efficiency
Joachim A. Renz et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Frederik C. Krebs
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
A complete process for production of flexible large area polymer solar cells entirely using screen printing-First public demonstration
Frederik C. Krebs et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Design rules for donors in bulk-heterojunction tandem solar cells-towards 15 % energy-conversion efficiency
Gilles Dennler et al.
ADVANCED MATERIALS (2008)
Polymer based organic solar cells using ink-jet printed active layers
T. Aernouts et al.
APPLIED PHYSICS LETTERS (2008)
Printing highly efficient organic solar cells
Claudia N. Hoth et al.
NANO LETTERS (2008)
Inkjet-printed polymer thin-film transistors: Enhancing performances by contact resistances engineering
Mickael Barret et al.
ORGANIC ELECTRONICS (2008)
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Emine Tekin et al.
SOFT MATTER (2008)
Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime
Jens A. Hauch et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2008)
Controlled pattern formation of poly [2-methoxy-5(2′-ethylhexyloxyl)-1,4-phenylenevinylene] (MEH-PPV) by ink-jet printing
Emine Tekin et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Inkjet printing of luminescent CdTe nanocrystal-polymer composites
Emine Tekin et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Inkjet printing of polyurethane colloidal suspensions
Antje M. J. van den Berg et al.
SOFT MATTER (2007)
Conjugated polymer-based organic solar cells
Serap Guenes et al.
CHEMICAL REVIEWS (2007)
Ink-jet printing and microwave sintering of conductive silver tracks
Jolke Perelaer et al.
ADVANCED MATERIALS (2006)
Theoretical models and experimental results on the temperature dependence of polyfluorene solar cells
Fengling Zhang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2006)
Origin of the enhanced performance in poly(3-hexylthiophene):: [6,6]-phenyl C61-butyric acid methyl ester solar cells upon slow drying of the active layer
Valentin D. Mihailetchi et al.
APPLIED PHYSICS LETTERS (2006)
Marangoni effect reverses coffee-ring depositions
H Hu et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2006)
Design rules for donors in bulk-heterojunction solar cells -: Towards 10 % energy-conversion efficiency
MC Scharber et al.
ADVANCED MATERIALS (2006)
Film thickness dependency of the emission colors of PPE-PPVs in inkjet printed libraries
Emine Tekin et al.
JOURNAL OF MATERIALS CHEMISTRY (2006)
Variations in semiconducting polymer microstructure and hole mobility with spin-coating speed
DM DeLongchamp et al.
CHEMISTRY OF MATERIALS (2005)
High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends
G Li et al.
NATURE MATERIALS (2005)
Effect of mesoscale crystalline structure on the field-effect mobility of regioregular poly(3-hexyl thiophene) in thin-film transistors
HC Yang et al.
ADVANCED FUNCTIONAL MATERIALS (2005)
Ink-jet printing of electron donor/acceptor blends: Towards bulk heterojunction solar cells
V Marin et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2005)
Ink-jet printing of luminescent ruthenium- and iridium-containing polymers for applications in light-emitting devices
E Tekin et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2005)
Simple modification of sheet resistivity of conducting polymeric anodes via combinatorial ink-jet printing techniques
Y Yoshioka et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2005)
Inkjet printing of polymers: State of the art and future developments
BJ de Gans et al.
ADVANCED MATERIALS (2004)
Enhanced mobility of poly(3-hexylthiophene) transistors by spin-coating from high-boiling-point solvents
JF Chang et al.
CHEMISTRY OF MATERIALS (2004)
Ink-jet printing of polymers - from single dots to thin film libraries
E Tekin et al.
JOURNAL OF MATERIALS CHEMISTRY (2004)
Ink-jet printing of wax-based alumina suspensions
KAM Seerden et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2001)
Fabrication of bulk heterojunction plastic solar cells by screen printing
SE Shaheen et al.
APPLIED PHYSICS LETTERS (2001)
Photovoltaic performance and morphology of polyfluorene blends: A combined microscopic and photovoltaic investigation
AC Arias et al.
MACROMOLECULES (2001)
Device performance and polymer morphology in polymer light emitting diodes: The control of thin film morphology and device quantum efficiency
Y Shi et al.
JOURNAL OF APPLIED PHYSICS (2000)
Pattern formation in drying drops
RD Deegan
PHYSICAL REVIEW E (2000)
分享论文
