相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Comparison between superplastic deformation mechanisms at primary and steady stages of the fine grain AA7475 aluminium alloy
A. V. Mikhaylovskaya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Insight into the microstructural evolution during cryo-severe plastic deformation and post-deformation annealing of aluminum and its alloys
A. Dhal et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Microstructural evolution of 2099 Al-Li alloy during friction stir welding process
Yi Lin et al.
MATERIALS CHARACTERIZATION (2017)
High strain rate superplasticity in an Al-Mg-Sc-Zr alloy processed via simple rolling
Mengjia Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Grain size versus microstructural stability in the high strain rate superplastic response of a severely friction stir processed Al-Zn-Mg-Cu alloy
Alberto Orozco-Caballero et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Superplastic behavior of carbon nanotube reinforced aluminum composites fabricated by flake powder metallurgy
Haiyue Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Precipitation in an Al-Zn-Mg-Cu alloy during isothermal aging: Atomic-scale HAADF-STEM investigation
Xuesong Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
High-strain-rate superplasticity of fine-grained Mg-6Zn-0.5Zr alloy subjected to low-temperature indirect extrusion
Beomcheol Kim et al.
SCRIPTA MATERIALIA (2017)
Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained Al-Zn-Mg alloys
Kaka Ma et al.
ACTA MATERIALIA (2016)
Strategy for severe friction stir processing to obtain acute grain refinement of an Al-Zn-Mg-Cu alloy in three initial precipitation states
A. Orozco-Caballero et al.
MATERIALS CHARACTERIZATION (2016)
Characterizing precipitate evolution of an Al-Zn-Mg-Cu-based commercial alloy during artificial aging and non-isothermal heat treatments by in situ electrical resistivity monitoring
Fulin Jiang et al.
MATERIALS CHARACTERIZATION (2016)
Superplastic behavior and microstructure evolution of a new Al-Mg-Sc-Zr alloy subjected to a simple thermomechanical processing
Y. L. Duan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Experimental verification of grain boundary-sliding controlled steady state superplastic flow in both continually and statically recrystallizing Al alloys
Arun K. Babu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Superplasticity behaviors of Al-Zn-Mg-Zr cold-rolled alloy sheet with minor Sc addition
H. Xiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Superplastic behaviour of Al-Mg-Zn-Zr-Sc-based alloys at high strain rates
A. V. Mikhaylovskaya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Achieving high strain rate superplasticity of an Al-Mg-Sc-Zr alloy by a new asymmetrical rolling technology
Guofu Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Achieving high superplasticity of a traditional thermal-mechanical processed non-superplastic Al-Zn-Mg alloy sheet by low Sc additions
Yulu Duan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Microstructural, mechanical and electrochemical behaviour of a 7017 Al-Zn-Mg alloy of different tempers
Prasanta Kumar Rout et al.
MATERIALS CHARACTERIZATION (2015)
Effect of Sc and Zr additions on grain stability and superplasticity of the simple thermal-mechanical processed Al-Zn-Mg alloy sheet
Y. L. Duan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Excellent superplasticity and deformation mechanism of Al-Mg-Sc-Zr alloy processed via simple free forging
Y. L. Duan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Achieving high superplasticity of a new Al-Mg-Sc-Zr alloy sheet prepared by a simple thermal-mechanical process
Xiaowu Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Superplastic deformation mechanisms in fine-grained Al-Mg based alloys
A. V. Mikhaylovskaya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Mechanical properties of ultra-fine grained AZ91 magnesium alloy processed by friction stir processing
J. A. del Valle et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Grain refinement and high strain rate superplasticity in alumunium 2024 alloy processed by high-pressure torsion
Ali Alhamidi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Hot ductility behavior of an extruded 7075 aluminum alloy
M. Taheri-Mandarjani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
High strain-rate superplasticity of fine- and ultrafine-grained AA5083 aluminum alloy at intermediate temperatures
N. Fakhar et al.
MATERIALS & DESIGN (2015)
Superplasticity of the rolled and friction stir processed Al-4.5 Mg-0.35Sc-0.15Zr alloy
Anton Smolej et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Evaluating the Superplastic Flow of a Magnesium AZ31 Alloy Processed by Equal-Channel Angular Pressing
Roberto B. Figueiredo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Grain structure and microtexture evolution during superplastic deformation of 5A90 Al-Li alloy
Pan Zhang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Microstructures and properties of 2099 Al-Li alloy
Yi Lin et al.
MATERIALS CHARACTERIZATION (2013)
Lowering the temperature for high strain rate superplasticity in an Al-Mg-Zn-Cu alloy via cooled friction stir processing
A. Orozco-Caballero et al.
MATERIALS CHEMISTRY AND PHYSICS (2013)
Processing maps and microstructural evolution of isothermal compressed Al-Cu-Li alloy
Hao Yin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The Evolution of Al-Li Base Products for Aerospace and Space Applications
Roberto J. Rioja et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Influence of Processing Severity During Equal-Channel Angular Pressing on the Microstructure of an Al-Zn-Mg-Cu Alloy
Carmen M. Cepeda-Jimenez et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Deformation defects and electron irradiation effect in nanostructured Al-Mg alloy processed by severe plastic deformation
Liu Man-ping et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Mechanical properties at room temperature of an Al-Zn-Mg-Cu alloy processed by equal channel angular pressing
C. M. Cepeda-Jimenez et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Realization of exceptionally high elongation at high strain rate in a friction stir processed Al-Zn-Mg-Cu alloy with the presence of liquid phase
K. Wang et al.
SCRIPTA MATERIALIA (2011)
Diffusion creep and superplasticity in aluminium alloys
K. Sotoudeh et al.
ACTA MATERIALIA (2010)
Superplasticity, dynamic grain growth and deformation mechanism in ultra-light two-phase magnesium-lithium alloys
F. R. Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Contribution of grain boundary sliding in low-temperature superplasticity of ultrafine-grained aluminum alloys
F. C. Liu et al.
SCRIPTA MATERIALIA (2010)
Superplastic behavior of an Al-Mg-Li alloy
Lingying Ye et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
High strain rate superplasticity in continuous cast Al-Mg alloys prepared via friction stir processing
M. A. Garcia-Bernal et al.
SCRIPTA MATERIALIA (2009)
Mechanical behaviour and microstructural evolution in superplastic Al-Li-Mg-Cu-Zr AA8090
P. S. Bate et al.
ACTA MATERIALIA (2007)
Multiple passes of friction stir processing for the creation of superplastic 7075 aluminum
L. B. Johannes et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Enhanced superplasticity through friction stir processing in continuous cast AA5083 aluminum
L. B. Johannes et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Dynamic recrystallisation and superplasticity in pure aluminium with zirconium addition
S. Katsas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Symbiosis between grain boundary sliding and slip creep to obtain high-strain-rate superplasticity in aluminum alloys
Jorge A. del Valle et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)
High strain rate superplasticity in an Al-Mg-Sc-Zr alloy subjected to simple thermomechanical processing
R Kaibyshev et al.
SCRIPTA MATERIALIA (2006)
Microstructure and thermal stabilityof superplastic aluminium-lithium alloy after severe plastic deformation
A. A. Mazilkin et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Development of ultrafine-grained microstructure and low temperature (0.48 Tm) superplasticity in friction stir processed Al-Mg-Zr
ZY Ma et al.
SCRIPTA MATERIALIA (2005)
Microstructure and texture evolution in the tension of superplastic Al-6Cu-0.4Zr
PS Bate et al.
ACTA MATERIALIA (2005)
Achieving high strain rate superplasticity in an At-Li-Mg alloy through equal channel angular extrusion
R Kaibyshev et al.
MATERIALS SCIENCE AND TECHNOLOGY (2005)
Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion
G Sakai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Low temperature superplasticity in a friction-stir-processed ultrafine grained Al-Zn-Mg-Sc alloy
I Charit et al.
ACTA MATERIALIA (2005)
Size and distribution of particles and voids pre-existing in equal channel angular pressed 5083 Al alloy: their effect on cavitation during low-temperature superplastic deformation
KT Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Enhancement of high strain rate superplastic elongation of a modified 5154 Al by subsequent rolling after equal channel angular pressing
KT Park et al.
SCRIPTA MATERIALIA (2004)
Nanostructuring of metals by severe plastic deformation for advanced properties
R Valiev
NATURE MATERIALS (2004)
Evaluation of microstructure and superplasticity in friction stir processed 5083 Al alloy
I Charit et al.
JOURNAL OF MATERIALS RESEARCH (2004)
High strain rate superplasticity in friction stir processed Al-Mg-Zr alloy
ZY Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Comparison of grain boundary sliding in fine grained Mg and Al alloys during superplastic deformation
YN Wang et al.
SCRIPTA MATERIALIA (2003)
Superplasticity and grain boundary sliding characteristics in two stage deformation of Mg-3Al-lZn alloy sheet
JC Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Low temperature superplasticity and its deformation mechanism in grain refinement of Al-Mg alloy by multi-axial alternative forging
M Noda et al.
MATERIALS TRANSACTIONS (2003)
Strengthening mechanisms of an Al-Mg-Sc-Zr alloy
KL Kendig et al.
ACTA MATERIALIA (2002)
The influence of the thermomechanical processing and forming parameters on superplastic behaviour of the 7475 aluminium alloy
A Smolej et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
A new route to bulk nanostructured metals
YT Zhu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Influence of rolling on the superplastic behavior of an Al-Mg-Sc alloy after ECAP
H Akamatsu et al.
SCRIPTA MATERIALIA (2001)
A metallographic and quantitative analysis of the influence of stacking fault energy on shock-hardening in Cu and Cu-Al alloys
A Rohatgi et al.
ACTA MATERIALIA (2001)
Development of a high strain rate superplastic Al-Mg-Zr alloy
R Grimes et al.
MATERIALS SCIENCE AND TECHNOLOGY (2000)
Superplastic forming at high strain rates after severe plastic deformation
Z Horita et al.
ACTA MATERIALIA (2000)
Grain size and temperature dependence of superplastic deformation in an Al-Mg alloy under isostructural condition
DH Bae et al.
ACTA MATERIALIA (2000)