相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Physical and Compression Properties of Pellets Manufactured with the Biomass of Five Woody Tropical Species of Costa Rica Torrefied at Different Temperatures and Times
Johanna Gaitan-Alvarez et al.
ENERGIES (2017)
Pelletizing Properties of Wheat Straw Blending with Rice Straw
Yu Wang et al.
ENERGY & FUELS (2017)
Prediction of ISO 17831-1:2015 mechanical biofuel pellet durability from single pellet characterization
Sylvia H. Larsson et al.
FUEL PROCESSING TECHNOLOGY (2017)
Mechanical degradation of biomass wood pellets during long term stockpile storage
Shalini Graham et al.
FUEL PROCESSING TECHNOLOGY (2017)
Effects of pelletizing pressure and the addition of woody bulking agents on the physical and mechanical properties of pellets made from composted pig solid fraction
Niccolo Pampuro et al.
POWDER TECHNOLOGY (2017)
Factors affecting wood, energy grass and straw pellet durability - A review
Carly Whittaker et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Characteristics of lightweight aggregate produced from lime-treated sewage sludge and palm oil fuel ash
P. C. Lau et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Benefits of dry comminution of biomass pellets in a knife mill
Orla Williams et al.
BIOSYSTEMS ENGINEERING (2017)
Biofuel pellets made at low moisture content - Influence of water in the binding mechanism of densified biomass
Yan Huang et al.
BIOMASS & BIOENERGY (2017)
Influence of mill type on densified biomass comminution
Orla Williams et al.
APPLIED ENERGY (2016)
Changes in mechanical properties of wood pellets during artificial degradation in a laboratory environment
Shalini Graham et al.
FUEL PROCESSING TECHNOLOGY (2016)
Hay pellets - The influence of particle size reduction on their physical-mechanical quality and energy demand during production
Claudia Kirsten et al.
FUEL PROCESSING TECHNOLOGY (2016)
Effect of Particle Size on Mechanical Properties of Pellets Made from Biomass Blends
Noorfidza Y. Harun et al.
PROCEEDING OF 4TH INTERNATIONAL CONFERENCE ON PROCESS ENGINEERING AND ADVANCED MATERIALS (ICPEAM 2016) (2016)
Study on the effects of raw materials composition and pelletization conditions on the quality and properties of pellets obtained from different woody and non woody biomasses
J. M. Castellano et al.
FUEL (2015)
A Review of Pellets from Different Sources
Teresa Miranda et al.
MATERIALS (2015)
Inherent hazards, poor reporting and limited learning in the solid biomass energy sector: A case study of a wheel loader igniting wood dust, leading to fatal explosion at wood pellet manufacturer
Frank Huess Hedlund et al.
BIOMASS & BIOENERGY (2014)
A review on torrefied biomass pellets as a sustainable alternative to coal in power generation
L. J. R. Nunes et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
An original impact device for biomass characterisation: results obtained for spruce and poplar at different moisture contents
Floran Pierre et al.
WOOD SCIENCE AND TECHNOLOGY (2013)
Quality effects caused by torrefaction of pellets made from Scots pine
Lei Shang et al.
FUEL PROCESSING TECHNOLOGY (2012)
A review of biomass densification systems to develop uniform feedstock commodities for bioenergy application
Jaya Shankar Tumuluru et al.
BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR (2011)
Influence of process parameters and biomass characteristics on the durability of pellets from the pruning residues of Olea europaea L.
Maria Teresa Carone et al.
BIOMASS & BIOENERGY (2011)
A study of bonding and failure mechanisms in fuel pellets from different biomass resources
Wolfgang Stelte et al.
BIOMASS & BIOENERGY (2011)
A comparative study of quality properties of pelletized agricultural and forestry lopping residues
M. Zamorano et al.
RENEWABLE ENERGY (2011)
Mechanical durability and combustion characteristics of pellets from biomass blends
M. V. Gil et al.
BIORESOURCE TECHNOLOGY (2010)
Robust smoothing of gridded data in one and higher dimensions with missing values
Damien Garcia
COMPUTATIONAL STATISTICS & DATA ANALYSIS (2010)
An overview of the chemical composition of biomass
Stanislav V. Vassilev et al.
FUEL (2010)
Factors affecting strength and durability of densified biomass products
Nalladurai Kaliyan et al.
BIOMASS & BIOENERGY (2009)
Effect of biomaterial characteristics on pelletizing properties and biofuel pellet quality
Robert Samuelsson et al.
FUEL PROCESSING TECHNOLOGY (2009)
Toward an understanding of controlling parameters in softwood and hardwood pellets production
Jens K. Holm et al.
ENERGY & FUELS (2006)
Effects of compressive force, particle size and moisture content on mechanical properties of biomass pellets from grasses
Sudhagar Mani et al.
BIOMASS & BIOENERGY (2006)
Mechanics of the rate-dependent elastic-plastic deformation of glassy polymers from low to high strain rates
AD Mulliken et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Physical characterisation and chemical composition of densified biomass fuels with regard to their combustion behaviour
I Obernberger et al.
BIOMASS & BIOENERGY (2004)
High-pressure densification of wood residues to form an upgraded fuel
YD Li et al.
BIOMASS & BIOENERGY (2000)