相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。PLGA doping of PCL affects the plastic potential of human mesenchymal stem cells, both in the presence and absence of biological stimuli
J. M. Curran et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)
Degradable and bioresorbable polymers in surgery and in pharmacology: beliefs and facts
Michel Vert
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2009)
BioStar 2008–Science in Exchange Meeting Abstracts
TISSUE ENGINEERING PART A (2009)
Sustained release of ciprofloxacin from an osteoconductive poly(DL)-lactide implant
Jyri K. Koort et al.
ACTA ORTHOPAEDICA (2008)
Assessment of stem cell/biomaterial combinations for stem cell-based tissue engineering
Sabine Neuss et al.
BIOMATERIALS (2008)
On the mechanisms of biocompatibility
David F. Williams
BIOMATERIALS (2008)
Surface energy effects on osteoblast spatial growth and mineralization
Jung Yul Lim et al.
BIOMATERIALS (2008)
Manufacture of degradable polymeric scaffolds for bone regeneration
Zigang Ge et al.
BIOMEDICAL MATERIALS (2008)
Foreign body reaction to biomaterials
James M. Anderson et al.
SEMINARS IN IMMUNOLOGY (2008)
Time-dependent mechanical strength of 70/30 poly(L, DL-lactide)
Theo H. Smit et al.
SPINE (2008)
Fusion assessment of posterior lumbar interbody fusion using radiolucent cages: X-ray films and helical computed tomography scans compared with surgical exploration of fusion
Guy R. Fogel et al.
SPINE JOURNAL (2008)
DEGRADABLE POLYMERIC MATERIALS FOR OSTEOSYNTHESIS: TUTORIAL
D. Eglin et al.
EUROPEAN CELLS & MATERIALS (2008)
Ethylene oxide sterilization of medical devices: A review
Gisela C. C. Mendes et al.
AMERICAN JOURNAL OF INFECTION CONTROL (2007)
Effects of electron-beam irradiation on surface oxidation of polymer composites
Marian Zenkiewicz et al.
APPLIED SURFACE SCIENCE (2007)
Adhesion behavior of human bone marrow stromal cells on differentially wettable polymer surfaces
Moon Suk Kim et al.
TISSUE ENGINEERING (2007)
Stem cells from adipose tissue allow challenging new concepts for regenerative medicine
Marco N. Helder et al.
TISSUE ENGINEERING (2007)
Fabrication of combinatorial polymer scaffold libraries
Carl G. Simon et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2007)
Sterilization and strength of 70/30 polylactide cages -: e-beam Versus ethylene oxide
Theo H. Smit et al.
SPINE (2007)
Systematic study of osteoblast and fibroblast response to roughness by means of surface-morphology gradients
Tobias P. Kunzler et al.
BIOMATERIALS (2007)
Continuous infusion of local anesthetic at iliac crest bone-graft sites for postoperative pain relief - A randomized, double-blind study
Steven J. Morgan et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2006)
In vitro and in vivo testing of bioabsorbable antibiotic containing bone filler for osteomyelitis treatment
Jyri K. Koort et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)
Shape memory properties of poly(D,L-lactide)/hydroxyapatite composites
Xiaotong Zheng et al.
BIOMATERIALS (2006)
Cellular and molecular dynamics in the foreign body reaction
Daniel T. Luttikhuizen et al.
TISSUE ENGINEERING (2006)
Radiographic, histologic, and chemical evaluation of bioresorbable 70/30 poly-L-lactide-CO-D, L-lactide interbody fusion cages in a goat model
Matthijs R. Krijnen et al.
SPINE (2006)
How useful is SBF in predicting in vivo bone bioactivity?
T Kokubo et al.
BIOMATERIALS (2006)
The effect of glow discharge plasma surface modification of polymers on the osteogenic differentiation of committed human mesenchymal stem cells
F Mwale et al.
BIOMATERIALS (2006)
Improvement of cell adhesion on poly(L-lactide) by atmospheric plasma treatment
M Nakagawa et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)
Engineering three-dimensional pulmonary tissue constructs
Mark J. Mondrinos et al.
TISSUE ENGINEERING (2006)
Unilateral transforaminal lumbar interbody fusion and bilateral anterior-column fixation with two Brantigan I/F cages per level: clinical outcomes during a minimum 2-year follow-up period
H Taneichi et al.
JOURNAL OF NEUROSURGERY-SPINE (2006)
Hardware removal: Indications and expectations
ML Busam et al.
JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS (2006)
Bioresorbable polymers: heading for a new generation of spinal cages
PIJM Wuisman et al.
EUROPEAN SPINE JOURNAL (2006)
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
K Rezwan et al.
BIOMATERIALS (2006)
Bone graft substitutes
Cato Laurencin et al.
EXPERT REVIEW OF MEDICAL DEVICES (2006)
Implant surface roughness and bone healing: a systematic review
M. M. Shalabi et al.
JOURNAL OF DENTAL RESEARCH (2006)
In vitro and in vivo release of ciprofloxacin from osteoconductive bone defect filler
TJ Mäkinen et al.
JOURNAL OF ANTIMICROBIAL CHEMOTHERAPY (2005)
Exploring and engineering the cell surface interface
MM Stevens et al.
SCIENCE (2005)
Bone substitutes: An update
PV Giannoudis et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2005)
Molecular determinants of biocompatibility
LP Tang et al.
EXPERT REVIEW OF MEDICAL DEVICES (2005)
Hydrophobicity as a design criterion for polymer scaffolds in bone tissue engineering
EJP Jansen et al.
BIOMATERIALS (2005)
Light-induced shape-memory polymers
A Lendlein et al.
NATURE (2005)
Mediation of biomaterial-cell interactions by adsorbed proteins: A review
CJ Wilson et al.
TISSUE ENGINEERING (2005)
Fixation of osteochondritis dissecans lesions using poly(l-lactic acid)/poly(glycolic acid) copolymer bioabsorbable screws
MW Larsen et al.
AMERICAN JOURNAL OF SPORTS MEDICINE (2005)
Porosity of 3D biomaterial scaffolds and osteogenesis
V Karageorgiou et al.
BIOMATERIALS (2005)
Biodegradable, amorphous copolyester-urethane networks having shape-memory properties
A Alteheld et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2005)
Adipose-derived adult stromal cells heal critical-size mouse calvarial defects
CM Cowan et al.
NATURE BIOTECHNOLOGY (2004)
Small changes in the polymer structure influence the adsorption behavior of fibrinogen on polymer surfaces: Validation of a new rapid screening technique
N Weber et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2004)
Stabilization of anterior cervical spine with biciabsorbable polymer in one- and two-level fusions
MS Park et al.
NEUROSURGERY (2004)
Successful use of biosorb osteofixation devices in 165 cranial and maxillofacial cases:: A multicenter report
N Ashammakhi et al.
JOURNAL OF CRANIOFACIAL SURGERY (2004)
Lumbar intervertebral body fusion cages: Histological evaluation of clinically failed cages retrieved from humans
D Togawa et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2004)
Implant removal for late-developing infection after instrumented posterior spinal fusion for scoliosis:: reinstrumentation reduces loss of correction.: A retrospective analysis of 45 cases
M Muschik et al.
EUROPEAN SPINE JOURNAL (2004)
Plasma-treated polystyrene surfaces: model surfaces for studying cell-biomaterial interactions
TG van Kooten et al.
BIOMATERIALS (2004)
Biomaterial optimization in total disc arthroplasty
N Hallab et al.
SPINE (2003)
Changes in bone architecture during spinal fusion:: Three years follow-up and the role of cage stiffness
TH Smit et al.
SPINE (2003)
Nano-structured polymers enhance bladder smooth muscle cell function
A Thapa et al.
BIOMATERIALS (2003)
Performance of degradable composite bone repair products made via three-dimensional fabrication techniques
TD Roy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2003)
Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs
KF Leong et al.
BIOMATERIALS (2003)
Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication
E Sachlos et al.
BIOMATERIALS (2003)
MG63 osteoblastic cell adhesion to the hydrophobic surface precoated with recombinant osteopontin fragments
YJ Lee et al.
BIOMATERIALS (2003)
Spotlight on naturally absorbable osteofixation devices
N Ashammakhi et al.
JOURNAL OF CRANIOFACIAL SURGERY (2003)
Enhancing the cell affinity of macroporous poly(L-lactide) cell scaffold by a convenient surface modification method
J Yang et al.
POLYMER INTERNATIONAL (2003)
In vitro and in vivo degradation of bioabsorbable PLLA spinal fusion cages
M van Dijk et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Bioabsorbable poly-L-lactic acid cages for lumbar interbody fusion - Three-year follow-up radiographic, histologic, and histomorphometric analysis in goats
M van Dijk et al.
SPINE (2002)
Why degradable polymers undergo surface erosion or bulk erosion
F von Burkersroda et al.
BIOMATERIALS (2002)
Biomaterial adherent macrophage apoptosis is increased by hydrophilic and anionic substrates in vivo
WG Brodbeck et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2002)
Long-term functional outcome of pedicle screw instrumentation as a support for posterolateral spinal fusion -: Randomized clinical study with a 5-year follow-up
FB Christensen et al.
SPINE (2002)
Biodegradable, elastic shape-memory polymers for potential biomedical applications
A Lendlein et al.
SCIENCE (2002)
The effect of cage stiffness on the rate of lumbar interbody fusion - An in vivo model using poly(L-lactic acid) and titanium cages
M van Dijk et al.
SPINE (2002)
Geometry of artificial ECM: Sizes of pores controlling phenotype expression in BMP-induced osteogenesis and chondrogenesis
Y Kuboki et al.
CONNECTIVE TISSUE RESEARCH (2002)
Bioinspired growth of crystalline carbonate apatite on biodegradable polymer substrata
WL Murphy et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2002)
Poly(D,L-lactic acid) surfaces modified by silk fibroin: effects on the culture of osteoblast in vitro
KY Cai et al.
BIOMATERIALS (2002)
Effect of gamma, ethylene oxide, electron beam, and plasma sterilization on the behaviour of SR-PLLA fibres in vitro
JP Nuutinen et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2002)
Bone graft incorporation in radiographically successful human intervertebral body fusion cages
D Togawa et al.
SPINE (2001)
Human osteoprogenitor growth and differentiation on synthetic biodegradable structures after surface modification
XB Yang et al.
BONE (2001)
Effect of surface roughness of the titanium alloy Ti-6Al-4V on human bone marrow cell response and on protein adsorption
DD Deligianni et al.
BIOMATERIALS (2001)
Biomaterial developments for bone tissue engineering
KJL Burg et al.
BIOMATERIALS (2000)
Bioabsorbable fixation in orthopaedic surgery and traumatology
PU Rokkanen et al.
BIOMATERIALS (2000)
Synthetic biodegradable polymers as orthopedic devices
JC Middleton et al.
BIOMATERIALS (2000)
Imaging pitfalls of interbody spinal implants
GR Cizek et al.
SPINE (2000)
Complications of posterior iliac crest bone grafting in spine surgery in children
DL Skaggs et al.
SPINE (2000)
Principles of development and use of absorbable internal fixation
WS Pietrzak
TISSUE ENGINEERING (2000)
Effects of mechanical forces on maintenance and adaptation of form in trabecular bone
R Huiskes et al.
NATURE (2000)
Lumbar interbody fusion using the Brantigan I/F Cage for posterior lumbar interbody fusion and the variable pedicle screw placement system - Two-year results from a Food and Drug Administration Investigational Device Exemption Clinical Trial
JW Brantigan et al.
SPINE (2000)
分享论文
