Characterization of coal fines generation: A micro-scale investigation

Coal fines are commonly generated as by-product during coalbed methane production mainly due to the interaction of coal with inseam water flow. A portion of the created coal fines may settle and plug the coal cleats and hydraulic fractures due to the gravity and coal pore size constraint. This could result in the reduction of coal permeability and blockage of coalbed methane wells or gas drainage boreholes. Despite the increasing awareness of the importance of understanding coal fines, limited research has been carried out on the characterization of coal fines creation. This study aimed to numerically characterize the generation process of coal fines in micro-scale coal cleats. The Scanning Electron Microscopy (SEM) images for a coal sample from Bulli Seam of the Sydney Basin in Australia were obtained and analysed to determine the actual cleat geometries and the characteristics of coal fines distribution. Then a fully coupled fluid-structure numerical model was developed to identify the creation process of coal fines at micro-scale. The impact of pertinent production conditions on coal fines generation was studied, including production pressure drawdown, temperature, coal fines Young's modulus and strength. The SEM images revealed that the particle size distributions of the coal fines in the examined cleats were in the order of hundreds of nanometres to several microns. The results of the numerical studies showed the coal fines production increased with pressure build-up, and decreased with increasing coal fines strength with more sensitivity compared with pressure. Critical values for production pressure drawdown were obtained, above which failure area began to expand; threshold values were also determined, below which remarkable reduction of coal fines production was achieved. Coal cleat geometry plays an important role in determining coal fines production. It was noted that exposed microstructures, cleat elbow regions and micro-fracture tips are more likely to generate coal fines. Based on these findings, guidance can be provided on the control of production conditions to mitigate coal fines issue, and new insight into where and how coal fines are created by inseam water flow can be achieved. (C) 2015 Elsevier B.V. All rights reserved.