Fabrication of carbon nanoflakes by RF sputtering for field emission applications

In this paper, an ultra thin sheet-like carbon nanostructure, carbon nanoflake (CNF), has been effectively fabricated by RF sputtering on Si substrate without any catalyst or special substrate pre-treatment. The CNFs were chosen to be the field emission emitters because of their very sharp and thin edges which are potentially good electron field emission sites. The effect of deposition parameters such as substrate temperature, gas flow ratio and RF power on the field emission properties is discussed in detail. The sheet-like structures with thickness of about 10 nm or less stand on edge on the substrate and have a defective graphite structure. The field emission properties of the sample deposited at the optimum deposition conditions are turn-on field of 5.5 V/mu m and current density of 1.4 mA/cm(2) at 11 V/mu m. Considering the inexpensive manufacturing cost, lower synthesis temperature and ease of large-area preparation, the CNFs with low turn-on field deposited by RF sputtering might have a potential application in field emission devices. (C) 2010 Elsevier Ltd. All rights reserved.