4.3 Article

FLOW BOILING HEAT TRANSFER COEFFICIENT OF R-134a/R-290/R-600a MIXTURE IN A SMOOTH HORIZONTAL TUBE

期刊

THERMAL SCIENCE
卷 12, 期 3, 页码 33-44

出版社

VINCA INST NUCLEAR SCI
DOI: 10.2298/TSCI0803033B

关键词

flow boiling; heat transfer coefficient; stratified flow; acetone; R-134a; HC blend; M09

资金

  1. Department of Science and Technology (DST-SERC), India [SR/S3/MERC/61/2004-SERC-Engg]

向作者/读者索取更多资源

An investigation on in-tube flow boiling heat transfer of R-134a/R-290/R-600a (91%/4.068%/4.932% by mass) refrigerant mixture has been carried out in a varied heat flux condition using a tube-in-tube counter-flow test section. The boiling heat transfer coefficients at temperatures between -5 and 5C for mass flow rates varying from 3 to 5 g/s were experimentally arrived. Acetone is used as hot fluid, which flows in the outer tube of diameter 28.57mm, while the test fluid flows in the inner tube of diameter 9.52 mm. By regulating the acetone flow rate and its entry temperature, different heat flux conditions between 2 and 8kW/m(2) were maintained. The pressure of the refrigerant was maintained at 3.5, 4, and 5 bar. Flow pattern maps constructed for the considered operating conditions indicated that the flow was predominantly stratified and stratified wavy. The heat transfer coefficient was found to vary between 500 and 2200 W/m(2) K. The effect of nucleate boiling prevailing even at high vapor quality in a low mass and heat flux application is highlighted. The comparison of experimental results with the familiar correlations showed that the correlations over predict the heat transfer coefficients of this mixture.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.3
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据