An amperometric biosensor based on multiwalled carbon nanotube-poly(pyrrole)-horseradish peroxidase nanobiocomposite film for determination of phenol derivatives

An amperometric biosensor based on horseradish peroxidase (HRP) and carbon nanotube (CNT)/polypyrrole(PPy) nanobiocomposite film on a gold surface has been developed. The HRP was incorporated into the CNT/PPy nanocomposite matrix in one-step electropolymerization process without the aid of cross-linking agent. Amperometric response was measured as a function of concentration of phenol derivatives, at a fixed bias voltage of -50mV. Optimization of the experimental parameters was performed with regard to pH and concentration of hydrogen peroxide. The linear range, sensitivity and detection limit of the biosensor were investigated for eighteen phenol derivatives. The sensitivity in the linear range increased in this order: 4-methoxyphenol > 2-aminophenol > guaiacol = m-cresol > 2-chlorophenol = 4-chlorophenol = hydroquinone = pyrocatechol > 2,6-dimethoxyphenol > 3-chlorophenol > p-cresol > p-benzoquinone = 4-acetamidophenol > catechol > phenol = pyrogallol = 2,4-dimethylphenol. CNTs was shown to enhance the electron transfer as a mediator and capable to carry higher bioactivity owing to its intensified surface area. The biosensor exhibited low detection limits with a short response time (2s) for the tested phenolics compared to the reported working electrodes. It retained 70% of its initial activity after using for 700 measurements in 1 month. (C) 2008 Elsevier B.V. All rights reserved.