Characterization of the alumina scale formed on coated and uncoated doped superalloys

To investigate the mechanisms by which Y and La dopants affect the oxidation behavior of Ni-base single-crystal superalloys, the oxide scales formed on two variants of a commercial X4 alloy, each with and without a MCrAlYHfSi coating were characterized. The alloy systems were oxidized for 100 h at 1100 degrees C and then examined using analytical transmission electron microscopy. Without a coating, a duplex scale was formed on the superalloy surface comprised of an outer Ni-rich spinel-type layer and an inner columnar alpha-Al(2)O(3) layer. In this case, Hf and Ti were found segregated to the alumina grain boundaries in the outer part of the scale on both alloys but only Hf was detected near the metal-alumina interface. There was no evidence of Ta. Y or La segregation to the alumina scale grain boundaries after this exposure. The scale formed on the alloys with the thermally sprayed coating was primarily alumina, and Y and Hf segregated to the alumina grain boundaries for both alloys. There was evidence of Ti-rich oxides in the outer part of the scale indicating that Ti had diffused through the coating into the thermally grown oxide but La was not found. Published by Elsevier B.V.