期刊
SURFACE & COATINGS TECHNOLOGY
卷 204, 期 6-7, 页码 766-770出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.surfcoat.2009.09.063
关键词
Aluminide coatings; Pack cementation; Al2O3; Water vapor; Oxidation; Steels
A pack cementation process was developed to coat commercial 9% Cr ferritic-martensitic steel T91 at temperatures below its normal tempering temperature to avoid any potential detrimental effect on the mechanical properties of the coated alloy. In order to prevent the formation of Fe2Al5 coatings, the Al activity in the pack cementation process was reduced by substituting the pure Al masteralloy with binary Cr-Al masterailloys containing either 15 or 25 wt.% Al. When the Cr-25Al masteralloy was used, a duplex coating was formed at 700 degrees C, consisting of a thin Fe2Al5 outer layer and an inner layer of FeAl. With the Cr-15Al masteralloy, an FeAl coating of similar to 12 mu m thick was achieved at 700 degrees C. The pack aluminicle coatings fabricated at 700 degrees C are being evaluated in air + 10 vol.% H2O at 650 degrees C and 700 degrees C to determine their long-term oxidation performance. (C) 2009 Elsevier B.V. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据