An Original Flow Diversion Device for the Treatment of Intracranial Aneurysms Evaluation in the Rabbit Elastase-Induced Model

Background and Purpose-The potential for successful treatment of intracranial aneurysms by flow diversion is gradually being recognized in the clinical setting; however, the devices currently available (stents) are not designed for flow diversion. We evaluate the long-term response of an appropriately designed flow diversion device in producing thrombotic occlusion of experimental aneurysms. Methods-Three different configurations of an original flow diversion device were implanted across thirty elastase-induced aneurysm models in rabbits. Ten animals per device configuration were followed-up for 3 weeks (n = 3), 3 months (n = 3), or 6 months (n = 4), and tissue explanted postsacrifice was sent for histology. The temporal variation in angiographic contrast intensity within each aneurysm was fitted with a mathematical model to quantify the alteration in local hemodynamics caused by the implanted device. A predictive index, called the washout coefficient, was constructed to estimate long-term aneurysm occlusion probabilities immediately after treatment with any flow diversion device. Results-The device with a porosity of 70% and pore density of 18 pores/mm(2) performed better at occluding aneurysms than devices with 70% porosity, 12 pores/mm(2) and 65% porosity, 14 pores/mm(2). A value of the washout coefficient less than 30 predicted greater than 97% angiographic aneurysm occlusion over a period of 6 months with a sensitivity of 73% and specificity of 82%. Conclusions-The flow diversion devices effected successful and stable aneurysm occlusion. Pore density, rather than porosity, may be the critical factor modulating efficacy of such devices. (Stroke. 2009; 40: 952-958.)