The effect of discontinuity frequency on ground vibrations produced from bench blasting: A case study

A good number of empirical formulae and methods dealing with the analysis of the effects of blast-induced ground vibrations have been developed. The most common approach suggested for estimating the attenuation of particle velocity on the ground is to scale the distance (scaled distance, SD). This approach makes it possible to estimate the peak particle velocity when the amount of explosive charge or the distance or both are altered. Many parameters known to have an influence on particle velocity have been used for particle velocity prediction equations. Some of these parameters are maximum charge per delay, the distance between the station and shot location, burden, inelastic attenuation factor and site factors. However, the impacts of the discontinuities existing on the benches where blasts are detonated on the propagation velocity of seismic waves have not been taken into consideration in these equations. This study aims to examine the impacts of the discontinuity frequency parameter derived through geological measurements carried out on the blasting benches or nearby in a quarry mine (Supren, Eskisehir) in Turkey on the propagation of blast-induced ground vibrations. Developed based on the geological observations carried out on the benches, the model was formed by adding discontinuity frequency parameter to the particle velocity prediction model suggested by Nicholls et al. [Nicholls HR, Johnson CF, Duvall WI. Blasting vibrations and their effects on structures. Bulletin no. 656. Washington, DC: US Bureau of Mines; 1971]. In order to research the effect of the discontinuity frequency in the bench on the blast-induced ground vibrations, the relationship between the recorded peak particle velocity, scaled distance and discontinuity frequency was statistically evaluated for the site. The established relationship and the results of the study are presented. (C) 2007 Elsevier Ltd. All rights reserved.