4.7 Article

Removal of SiO2 nanoparticles from industry wastewaters and subsurface waters by ultrafiltration: Investigation of process efficiency, deposit properties and fouling mechanism

期刊

SEPARATION AND PURIFICATION TECHNOLOGY
卷 108, 期 -, 页码 6-14

出版社

ELSEVIER
DOI: 10.1016/j.seppur.2013.01.043

关键词

Fouling mechanisms; Industry effluents; Nanoparticle suspension; Organic membrane; Ultrafiltration

资金

  1. French National Research Agency under the PRECODD program NANOSEP

向作者/读者索取更多资源

The novel properties of nanomaterials offer great promise of new technological breakthroughs. Consequently, their use in industry is expanding, and with it the risk of their being released in industrial effluents, and later in surface waters. This raises the problem of potential environmental hazards that are as yet unknown. The work presented in this paper evaluates the feasibility of membrane ultrafiltration for the removal of SiO2 nanoparticles (78 nm mean hydrodynamic diameter) in suspension at 0.14 wt% with the objective of treating them as pollutant compounds in industrial effluents. Regenerated cellulose membranes with two MWCOs of 10 and 100 kDa were implemented. The influence of the membrane MWCO, the TMP and the stirring rate during filtration were examined. Stirred filtrations were performed at increasing TMP so as to characterise flux behaviour and retention rates. The feasibility of membrane ultrafiltration for this application was proved since the results of the 10 kDa membrane showed the highest expectable retention rates (>99.6%) given the analytical methods used, and steady permeability results [30-40 L h(-1) m(-2) bar(-1)] independently of TMP and filtration course. Moreover, performance was shown to be sustainable as fouling was mostly reversible (>90%), being removable by simple membrane surface rinsing with ultrapure water. This was confirmed by the reconstruction of fouling mechanisms for both membranes. Unstirred and constant TMP 40, 80 and 200 kPa filtration experiments were run to study fouling phenomena and the filtration cake characteristics (compressibility and porosity). Two distinct fouling mechanisms were highlighted: the 100 kDa membrane underwent internal and sometimes irreversible fouling in the form of pore clogging before cake filtration, while the 10 kDa membrane was characterised by filtration cake only. This work proposes solutions for the predicament of nanoparticle release into the environment and opens up perspectives for efficient wastewater treatment in the context of their industrial development. (C) 2013 Elsevier B.V. All rights reserved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据