An electronic nose for the detection of Sarin, Soman and Tabun mimics and interfering agents

An electronic nose system (E-nose) with metal oxide semiconductor sensors (MOS) has been designed to discriminate and quantify different chemical warfare agents (CWA) mimics. The E-nose consists of an array of commercial MOS for different gases, two sensors for temperature sensing, a sample handling system, a data acquisition system and a laptop with the data acquisition system control. With this device, discrimination studies have been carried out to detect specific CWA simulants (diethyl chlorophosphonate (DCP), diethyl cyanophosphate (DCNP), diisipropyl fluoride (DFP)), their derivatives (diethyl 1-phenylethyl phosphonate (OP-1), diethyl (2- cyanoethyl)phosphonate (OP-2), dimethyl methyl phosphonate (OP-3) and diethyl (2-oxopropyl)phosphonate (OP-4)) and some potential interfering substances (sulfuric acid, ammonia, ethanol and acetone). Principal components analyses (PCA) show that it is possible to discriminate the studied organophosphorous CWA mimics (DCP, DCNP and DFP) from the other studied derivatives and potential interfering agents. In addition, DCNP quantification studies have been done by using partial least squares (PLS) and a mathematical model has been obtained to predict DCNP concentrations in air. In this model, the coefficient of determination (R-2) is 0.9567, the root mean square error of prediction (RMSEP) is 30 and the limit of detection (LOD) is 5 ppm so the model is considered valid. These results suggest that this E-nose system is capable to discriminate and quantify CWA mimics and it would be a feasible system to be used in a real scenario. (C) 2014 Elsevier B.V. All rights reserved.