相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Recent Developments in the Friction Stir Welding of Titanium Alloys
M. J. Russell et al.
Welding in the World (2013)
Friction stir welded structural materials: beyond Al-alloys
G. Çam
INTERNATIONAL MATERIALS REVIEWS (2011)
Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy
X. Cao et al.
MATERIALS & DESIGN (2011)
Microstructure and mechanical properties of friction stir welded Al/Mg2Si metal matrix cast composite
H. Nami et al.
MATERIALS & DESIGN (2011)
Prediction of tensile strength of friction stir welded aluminium matrix TiCp particulate reinforced composite
S. Gopalakrishnan et al.
MATERIALS & DESIGN (2011)
The microstructure and mechanical properties of friction stir welded Al-Zn-Mg alloy in as welded and heat treated conditions
R. K. R. Singh et al.
MATERIALS & DESIGN (2011)
Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminium alloy joints
S. Rajakumar et al.
MATERIALS & DESIGN (2011)
Through-thickness crystallographic texture of stationary shoulder friction stir welded aluminium
M. M. Z. Ahmed et al.
SCRIPTA MATERIALIA (2011)
Toward optimum friction stir welding tool shoulder diameter
A. Arora et al.
SCRIPTA MATERIALIA (2011)
Identification of Process Parameters for Friction Stir Welding Ti-6Al-4V
P. Edwards et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2010)
Investigations on the Effects of the Tool Material, Geometry, and Tilt Angle on Friction Stir Welding of Pure Titanium
K. Reshad Seighalani et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2010)
Analysis of effect of tool geometry on plastic flow during friction stir spot welding using particle method
Shigeki Hirasawa et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Hook formation and mechanical properties in AZ31 friction stir spot welds
Y. H. Yin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
A newly developed tool without probe for friction stir spot welding and its performance
Y. Tozaki et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Understanding the material flow path of friction stir welding process using unthreaded tools
Olivier Lorrain et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Joining of CP-Ti to 304 stainless steel using friction stir welding technique
M. Fazel-Najafabadi et al.
MATERIALS & DESIGN (2010)
Influence of tool pin profile on the metallurgical and mechanical properties of friction stir welded Al-10 wt.% TiB2 metal matrix composite
S. J. Vijay et al.
MATERIALS & DESIGN (2010)
Microstructural evolution during friction stir welding of Ti-15V-3Cr-3Al-3Sn alloy
S. Mironov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Material flow during friction stir spot welding
Q. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Tensile properties of a friction stir welded magnesium alloy: Effect of pin tool thread orientation and weld pitch
S. M. Chowdhury et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of Pin Shapes on Joint Characteristics of Friction Stir Spot Welded AA5J32 Sheet
Don-Hyun Choi et al.
MATERIALS TRANSACTIONS (2010)
Parametric finite-element studies on the effect of tool shape in friction stir welding
H. Li et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2010)
Effect of interfacial microstructure on lap shear strength of friction stir spot weld of aluminium alloy to magnesium alloy
Y. S. Sato et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Spot joining of AA 5754 and high strength steel sheets by consumable bit
M. P. Miles et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Effect of surface states of steel on microstructure and mechanical properties of lap joints of magnesium alloy and steel by friction stir welding
Y. C. Chen et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Friction stir spot welding of AA 1050 Al alloy and hot stamped boron steel (22MnB5)
A. A. M. da Silva et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Friction stir welding of ductile iron and low carbon steel
C. -P. Cheng et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Peak temperatures during friction stir welding of Ti-6Al-4V
P. Edwards et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Friction stir welding of pure titanium lap joint
H. Liu et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Influence of tool design on mechanical properties of AZ31 friction stir spot welds
Y. H. Yin et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Experimental investigation of onion ring structure formation in friction stir butt welds of copper plates produced by non-threaded tool pin
J. Teimournezhad et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Optimal FSW process parameters for interface and welded zone toughness of dissimilar aluminium-steel joint
T. P. Chen et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Friction stir welding of dissimilar alloys - a perspective
T. DebRoy et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Friction stir spot welding of DP780 carbon steel
M. Santella et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Study of friction stir joining of thin aluminium sheets in lap joint configuration
M. K. Yadava et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Metallurgical analysis of Al/Cu friction stir spot welding
R. Heideman et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Effect of tool geometry on static strength of friction stir spot-welded aluminum alloy
H. Badarinarayan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Effect of tool geometry on hook formation and static strength of friction stir spot welded aluminum 5754-O sheets
H. Badarinarayan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Frictional wear evaluation of WC-Co alloy tool in friction stir spot welding of low carbon steel plates
D. H. Choi et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2009)
Properties of tungsten-rhenium and tungsten-rhenium with hafnium carbide
Todd Leonhardt
JOM (2009)
Numerical and Experimental Investigations on the Loads Carried by the Tool During Friction Stir Welding
Hosein Atharifar et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2009)
Thermal Expansion Coefficient and Mechanical Properties of Friction Stir Welded Invar (Fe-36%Ni)
Bharat K. Jasthi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2009)
Process parameters study on FSW joint of dissimilar metals for aluminum-steel
Thaiping Chen
JOURNAL OF MATERIALS SCIENCE (2009)
The application of shoulderless conical tools in friction stir welding: An experimental and theoretical study
D. H. Lammlein et al.
MATERIALS & DESIGN (2009)
Selection of FSW tool pin profile, shoulder diameter and material for joining AZ31B magnesium alloy - An experimental approach
G. Padmanaban et al.
MATERIALS & DESIGN (2009)
Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys
Y. C. Chen et al.
MATERIALS & DESIGN (2009)
Effect of tool geometry on microstructure and mechanical properties of friction stir lap welded magnesium alloy and steel
Y. C. Chen et al.
MATERIALS & DESIGN (2009)
Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties
G. Buffa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3
Ulrike Dressler et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Effect of alloying elements on interface microstructure of Mg-Al-Zn magnesium alloys and titanium joint by friction stir welding
Masayuki Aonuma et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2009)
Boride Formation Induced by pcBN Tool Wear in Friction-Stir-Welded Stainless Steels
Seung Hwan C. Park et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Effect of process conditions on superplastic forming behaviour in Ti-6Al-4V friction stir welds
P. Edwards et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Effect of contamination on microstructure in friction stir spot welded DP590 steel
R. Ohashi et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Effect of friction stir welding conditions on properties and microstructures of high strength automotive steel
M. P. Miles et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Friction stir welding of hypereutectoid steel (SK5) below eutectoid temperature
Y. D. Chung et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Effect of reduced or zero pin length and anvil insulation on friction stir spot welding thin gauge 6111 automotive sheet
D. Bakavos et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Evaluation of microstructure and properties in friction stir welded superaustenitic stainless steel
Y. S. Sato et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Microstructural and mechanical characterisation of friction stir welded 15-5PH steel
T. Weinberger et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Tool design and stir zone grain size in AZ31 friction stir spot welds
N. Sun et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Investigation of microstructure, surface and subsurface characteristics in titanium alloy friction stir welds of varied thicknesses
P. D. Edwards et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Dissimilar friction stir spot welding of low carbon steel and Al-Mg alloy by formation of IMCs
C. -Y. Lee et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Critical assessment: friction stir welding of steels
H. K. D. H. Bhadeshia et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Effect of friction stir processing tool probe on fabrication of SiC particle reinforced composite on aluminium surface
E. R. I. Mahmoud et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Improved process stability during friction stir welding of 5 cm thick copper canisters through shoulder geometry and parameter studies
L. Cederqvist et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds
T. Liyanage et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Texture development in the stir zone of near-α titanium friction stir welds
K. E. Knipling et al.
SCRIPTA MATERIALIA (2009)
The stir zone microstructure and its formation mechanism in Ti-6Al-4V friction stir welds
L. Zhou et al.
SCRIPTA MATERIALIA (2009)
Failure modes and fatigue life estimations of spot friction welds in lap-shear specimens of aluminum 6111-T4 sheets. Part 2: Welds made by a flat tool
P. -C. Lin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Failure modes and fatigue life estimations of spot friction welds in lap-shear specimens of aluminum 6111-T4 sheets. Part 1: Welds made by a concave tool
P. -C. Lin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Toward reliable calculations of heat and plastic flow during friction stir welding of Ti-6Al-4V alloy
R. Nandan et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2008)
Characterization of the influences of FSW tool geometry on welding forces and weld tensile strength using an instrumented tool
D. G. Hattingh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy
K. Elangovan et al.
MATERIALS & DESIGN (2008)
Influence of tool geometry in friction stir welding
K. Kumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2008)
The role of friction stir welding tool on material flow and weld formation
K. Kumar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Stir zone microstructure of commercial purity titanium friction stir welded using pcBN tool
Yu Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Microstructures and mechanical properties of friction stir welded dissimilar copper/brass joints
C. Meran et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2008)
Recent advances in friction-stir welding - Process, weldment structure and properties
R. Nandan et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Influences of tool pin profile and axial force on the formation of friction stir processing zone in AA6061 aluminium alloy
K. Elangovan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Effect of tool geometry on microstructure and static strength in friction stir spot welded aluminium alloys
Yasunari Tozaki et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Friction stir spot welding of hot-stamped boron steel
Y. Hovanski et al.
SCRIPTA MATERIALIA (2007)
Friction stir welding of AISI 304 austenitic stainless steel
C. Meran et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2007)
Wear behaviour of uncoated and diamond coated Si3N4 tools under severe turning conditions
R. P. Martinho et al.
WEAR (2007)
Microstructural evolution of ultrahigh carbon steel during friction stir welding
Y. S. Sato et al.
SCRIPTA MATERIALIA (2007)
Experimental measurements of load distributions on friction stir weld pin tools
Carl D. Sorensen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2007)
Friction stir welding of a high carbon steel
Ling Cui et al.
SCRIPTA MATERIALIA (2007)
The role of chemical wear in machining iron based materials by PCD and PCBN super-hard tool materials
S. Gimenez et al.
DIAMOND AND RELATED MATERIALS (2007)
Three-dimensional heat and material flow during friction stir welding of mild steel
R. Nandan et al.
ACTA MATERIALIA (2007)
Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminium alloy
A. Scialpi et al.
MATERIALS & DESIGN (2007)
Tool materials selection for friction stir welding of L80 steel
W. Gan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2007)
Resistance and friction stir spot welding of DP600: a comparative study
M. I. Khan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2007)
Numerical modelling of 3D plastic flow and heat transfer during friction stir welding of stainless steel
R. Nandan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2006)
Friction stir welding of carbon steels
Hidetoshi Fujii et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Numerical simulation of three-dimensional heat transfer and plastic flow during friction stir welding
R Nandan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys
H Fujii et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Design of the friction stir welding tool using the continuum based FEM model
G Buffa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
A continuum based FEM model for friction stir welding - model development
G Buffa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Interface structure in a Fe-Ni friction stir welded joint
R Ayer et al.
SCRIPTA MATERIALIA (2005)
3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile
PA Colegrove et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Wear characteristics of a WC-Co tool in friction stir welding of AC4A+30 vol%SiCp composite
HJ Liu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Microstructural investigation of friction stir welded pure titanium
WB Lee et al.
MATERIALS LETTERS (2005)
The, influence of pin geometry on bonding and mechanical properties in friction stir weld 2014 Al alloy
YH Zhao et al.
MATERIALS LETTERS (2005)
Microstructural characterisation of stir zone containing residual ferrite in friction stir welded 304 austenitic stainless steel
SHC Park et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2005)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Study of friction stir welded A319 and A413 aluminum casting alloys
NA Rodriguez et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Microstructure and mechanical properties of friction stir welded SAF 2507 super duplex stainless steel
YS Sato et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
On the critical interfacial friction of a two-roll CWR process
Q Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Texture in friction stir welds of Timetal 21S
AP Reynolds et al.
SCRIPTA MATERIALIA (2005)
Characterization of aluminum/steel lap joint by friction stir welding
A Elrefaey et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2005)
A local model for the thermomechanical conditions in friction stir welding
H Schmidt et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2005)
Characterization of tool wear and weld optimization in the friction-stir welding of cast aluminum 359+20% SiC metal-matrix composite
GJ Fernandez et al.
MATERIALS CHARACTERIZATION (2004)
Development of Trivex friction stir welding tool Part 1 - two-dimensional flow modelling and experimental validation
PA Colegrove et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2004)
The effect of temperature on the hardness of polycrystalline cubic boron nitride cutting tool materials
TK Harris et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2004)
Two-dimensional CFD modelling of flow round profiled FSW tooling
PA Colegrove et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2004)
Experimental and numerical analysis of aluminium alloy 7075-T7351 friction stir welds
PA Colegrove et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2003)
Joint properties of friction stir welded AZ31B-H24 magnesium alloy
WB Lee et al.
MATERIALS SCIENCE AND TECHNOLOGY (2003)
Self-optimization in tool wear for friction-stir welding of Al 6061+20% Al2O3 MMC
RA Prado et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Structure, properties, and residual stress of 304L stainless steel friction stir welds
AP Reynolds et al.
SCRIPTA MATERIALIA (2003)
Improved weldability diagram for pulsed laser welded austenitic stainless steels
TJ Lienert et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2003)
Rapid formation of the sigma phase in 304 stainless steel during friction stir welding
SHC Park et al.
SCRIPTA MATERIALIA (2003)
Friction stir welding of DH36 steel
AP Reynolds et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2003)
Shape optimization for tool wear in the friction-stir welding of cast Al359-20% SiC MMC
DJ Shindo et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Flow patterns during friction stir welding
A Guerra et al.
MATERIALS CHARACTERIZATION (2002)
Compressibility and thermal expansion of cubic silicon nitride -: art. no. 161202
JZ Jiang et al.
PHYSICAL REVIEW B (2002)
Tool-wear mechanisms in hard turning with polycrystalline cubic boron nitride tools
G Poulachon et al.
WEAR (2001)
Wear mechanisms of ultra-hard cutting tools materials
F Nabhani
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Tool wear in the friction-stir welding of aluminum alloy 6061+20% Al2O3:: a preliminary study
RA Prado et al.
SCRIPTA MATERIALIA (2001)
Trends and recent developments in the material manufacture and cutting tool application of polycrystalline diamond and polycrystalline cubic boron nitride
MW Cook et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2000)
Mechanical properties of high purity polycrystalline cBN synthesized by direct conversion sintering method
H Sumiya et al.
JOURNAL OF MATERIALS SCIENCE (2000)
分享论文
