Synthesis of Cu-Zn-Zr-Al-O catalysts via a citrate complex route modified by different solvents and their dehydrogenation/hydrogenation performance

The quaternary Cu-Zn-Zr-Al-O catalysts have been prepared by a citrate-complex method using deionized water, ethanol, and ethyl acetate as solvents. The solvents with different polarity and solubility have a prominent influence on the reaction pathway(s) of the synthesis. When using ethanol as solvent to prepare the catalysts, the selectivity and yield to ethyl acetate of 89.5 wt% and 70.6 wt%, respectively, corresponding to 78.9 wt% conversion of ethanol, are achieved. This catalyst also shows good catalytic activity and stability (>120 h at 220 degrees C) in the conversion of ethanol containing 7 wt% of water. Its remarkable performance is due to the existence of smaller CuO particles and their more uniform dispersion, which is beneficial to form Cu-MxOy (M = Zn, Zr, Al) interfaces. The catalyst showing more strong basic sites associated with the high density of O-2(-) that migrated from the interaction of Cu-MxOy, which is favorable for the dehydrogenative dimerization of ethanol to ethyl acetate; furthermore, the moderate chemisorption and desorption of H-2 makes this catalyst more favorable for ethanol dehydrogenation. This catalyst also proves to be effective for a series of ethyl ester hydrogenations (e.g., ethyl acetate and diethyl oxalate), indicating a general promotion of these reactions using ethanol as the solvent to prepare the catalysts.