Visualization of Deformation-Induced Structural Rearrangements in Amorphous Polymers

A technique is proposed for decorating amorphous polymers: Before the deformation (shrinkage) of an amorphous polymer, its surface is decorated with a thin metal coating. The subsequent deformation is accompanied by surface structure formation, which makes the processes that occur in the polymer visible. The proposed technique makes it possible to visualize and describe the mechanism of transfer of the polymer from the surface into the bulk and vice versa and to obtain direct information about the direction of the actual local stress. The technique makes it possible to obtain information about the topological heterogeneity of rubber networks, to reveal the features of structural rearrangements that occur during the cold rolling of amorphous polymers, and to describe the phenomenon of self-elongation during annealing of the oriented PET. These microscopic data explain the following features of the structural and mechanical behavior of glassy polymers from a unified viewpoint: stress relaxation in a polymer in the elastic (Hookean) region of the stress-strain curve, an increase in stress in a deformed glassy polymer during its isometric annealing below T-g, the low-temperature shrinkage of a deformed polymer glass in the strain range below its yield point, the storage of internal energy in a deformed glassy polymer in the strain range below the yield point, some anomalies of thermophysical properties, and some other features.