相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Patterned Functional Carbon Fibers from Polyethylene
Marcus A. Hunt et al.
ADVANCED MATERIALS (2012)
Optimisation of the melt-spinning of anthracene oil-based pitch for isotropic carbon fibre preparation
Noel Diez et al.
FUEL PROCESSING TECHNOLOGY (2012)
Electrospinning Combined with Nonsolvent-Induced Phase Separation To Fabricate Highly Porous and Hollow Submicrometer Polymer Fibers
Karthik Nayani et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
On the characterization and spinning of an organic-purified lignin toward the manufacture of low-cost carbon fiber
Darren A. Baker et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Effect of the concentration of the sizing agent on the carbon fibers surface and interface properties of its composites
R. L. Zhang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Chemistry of Carbon Nanotubes for Everyone
Sharmistha Basu-Dutt et al.
JOURNAL OF CHEMICAL EDUCATION (2012)
Electromechanical response and failure behaviour of aerogel-spun carbon nanotube fibres under tensile loading
Amanda S. Wu et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Structural features of polyacrylonitrile-based carbon fibers
Wei Li et al.
JOURNAL OF MATERIALS SCIENCE (2012)
A Model for the Strength of Yarn-like Carbon Nanotube Fibers
Juan J. Vilatela et al.
ACS NANO (2011)
Enhancement of the Mechanical Properties of Directly Spun CNT Fibers by Chemical Treatment
Slawomir Boncel et al.
ACS NANO (2011)
High-Strength Carbon Nanotube Fibers Fabricated by Infiltration and Curing of Mussel-Inspired Catecholamine Polymer
Seongwoo Ryu et al.
ADVANCED MATERIALS (2011)
Improving preferred orientation and mechanical properties of PAN-based carbon fibers by pretreating precursor fibers in nitrogen
Xianying Qin et al.
CARBON (2011)
Effect of gamma-irradiation on the mechanical properties of carbon nanotube yarns
Menghe Miao et al.
CARBON (2011)
Gel-spun carbon nanotubes/polyacrylonitrile composite fibers. Part II: Stabilization reaction kinetics and effect of gas environment
Yaodong Liu et al.
CARBON (2011)
Gel-spun carbon nanotubes/polyacrylonitrile composite fibers. Part I: Effect of carbon nanotubes on stabilization
Yaodong Liu et al.
CARBON (2011)
Highly porous electrospun polyvinylidene fluoride (PVDF)-based carbon fiber
Ying Yang et al.
CARBON (2011)
Effect of an ultraviolet/ozone treatment on the surface texture and functional groups on polyacrylonitrile carbon fibres
S. Osbeck et al.
CARBON (2011)
Gel-spun carbon nanotubes/polyacrylonitrile composite fibers. Part III: Effect of stabilization conditions on carbon fiber properties
Yaodong Liu et al.
CARBON (2011)
Strong carbon nanofibers from electrospun polyacrylonitrile
Salman N. Arshad et al.
CARBON (2011)
Effect of Boric Acid on Oxidative Stabilization of Polyacrylonitrile Fibers
Gang-Ping Wu et al.
FIBERS AND POLYMERS (2011)
Effect of Electron Beam Irradiation on Polyacrylonitrile Precursor Fibers and Stabilization Process
Huiwu Yuan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Dependence of structures and properties of carbon nanotube fibers on heating treatment
Zhibin Yang et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Effect of UV Irradiation on PAN Precursor Fibers and Stabilization Process
Yuan Huiwu et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2011)
Pregelled gel spinning of polyacrylonitrile precursor fiber
Lianjiang Tan et al.
MATERIALS LETTERS (2011)
Structural changes of polyacrylonitrile precursor fiber induced by γ-ray irradiation
Lianjiang Tan et al.
MATERIALS LETTERS (2011)
Poly (acrylonitrile - co-1-vinylimidazole): A new melt processable carbon fiber precursor
Wenjin Deng et al.
POLYMER (2011)
Gel spinning of polyacrylonitrile fibers with medium molecular weight
Shuiping Liu et al.
POLYMER INTERNATIONAL (2011)
Improving carbon fiber adhesion to polyimide with atmospheric pressure plasma treatment
Jianfei Xie et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Axial Compression of Hierarchically Structured Carbon Nanotube Fiber Embedded in Epoxy
Yun Gao et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Yarn-Like Carbon Nanotube Fibers
Juan J. Vilatela et al.
ADVANCED MATERIALS (2010)
Continuous Multilayered Carbon Nanotube Yarns
Xiao-Hua Zhong et al.
ADVANCED MATERIALS (2010)
Study on the surface performance of carbon fibres irradiated by γ-ray under different irradiation dose
Jun-Qing Li et al.
APPLIED SURFACE SCIENCE (2010)
Fabrication of ultra thin and aligned carbon nanofibres from electrospun polyacrylonitrile nanofibres
Javed Rafique et al.
BULLETIN OF MATERIALS SCIENCE (2010)
Process Optimization for Preparing High Performance PAN-based Carbon Fibers
BULLETIN OF THE KOREAN CHEMICAL SOCIETY (2010)
Focused ion beam milling of carbon nanotube yarns to study the relationship between structure and strength
Kallista Sears et al.
CARBON (2010)
Solvothermal Process for Grafting Dibutylmaleate Onto Poly(ethylene-co-1-octene)
Juan Yu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Changes of polyacrylonitrile fiber fine structure during thermal stabilization
A. G. Fazlitdinova et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Carbonization of Electrospun Poly(acrylonitrile) Nanofibers Containing Multiwalled Carbon Nanotubes Observed by Transmission Electron Microscope with In Situ Heating
Sabina Prilutsky et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2010)
Graphitic carbon nanofibers developed from bundles of aligned electrospun polyacrylonitrile nanofibers containing phosphoric acid
Zhengping Zhou et al.
POLYMER (2010)
Gel-Spun Polyacrylonitrile Fiber From Pregelled Spinning Solution
Lianjiang Tan et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Double-Peak Mechanical Properties of Carbon-Nanotube Fibers
Jingna Zhao et al.
SMALL (2010)
Non-isothermal kinetic analysis of oxidative stabilization processes in PAN fibers
Stanislav S. Belyaev et al.
THERMOCHIMICA ACTA (2010)
FABRICATION OF PANBASED HOLLOW CARBON FIBERS BY OAXIAL ELECTROSPINNING AND TWO POST-TREATMENTS
Liangkui SUN et al.
ACTA POLYMERICA SINICA (2009)
Macroscopic Single-Walled-Carbon-Nanotube Fiber Self-Assembled by Dip-Coating Method
Eui Yun Jang et al.
ADVANCED MATERIALS (2009)
Surface structure and adsorption properties of ultrafine porous carbon fibers
Xiaofeng Song et al.
APPLIED SURFACE SCIENCE (2009)
Activated carbon fibers from electrospinning of polyacrylonitrile/pitch blends
Nhu-Ngoc Bui et al.
CARBON (2009)
Effect of carbonization time on the structure and electromagnetic parameters of porous-hollow carbon fibres
Wei Xie et al.
CERAMICS INTERNATIONAL (2009)
Ionically Self-Assembled Polyelectrolyte-Based Carbon Nanotube Fibers
Sandeep Razdan et al.
CHEMISTRY OF MATERIALS (2009)
Properties of composites of carbon nanotube fibres
R. J. Mora et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Carbon nanotube reinforced small diameter polyacrylonitrile based carbon fiber
Han Gi Chae et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Influence of High Temperature and Pressure Ammonia Solution Treatment on Interfacial Behavior of Carbon Fiber/Epoxy Resin Composites
L. H. Meng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Thermal-Shrinkage Investigation of the Chemical Reaction During the Stabilization of Polyacrylonitrile Fibers
Yongping Hou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
The Microstructure of Polyacrylonitrile-Stabilized Fibers
Heyi Ge et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Surface characteristics of carbon fibers modified by direct oxyfluorination
Min-Kang Seo et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2009)
Synthesis and characterization of mesoporous electrospun carbon fibers derived from silica template
Ji Sun Im et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2009)
Effect of Atmospheres on Stabilization of Polyacrylonitrile Fibers
Tongqing Sun et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2009)
Study on the chemical structure and skin-core structure of polyacrylonitrile-based fibers during stabilization
Ming-yun Lv et al.
JOURNAL OF POLYMER RESEARCH (2009)
Fabrication of Carbon Fibers with Nanoporous Morphologies from Electrospun Polyacrylonitrile/Poly(L-lactide) Blends
Liwen Ji et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2009)
Superior prospect of chemically activated electrospun carbon fibers for hydrogen storage
Ji Sun Im et al.
MATERIALS RESEARCH BULLETIN (2009)
Development of carbon nanofibers from aligned electrospun polyacrylonitrile nanofiber bundles and characterization of their microstructural, electrical, and mechanical properties
Zhengping Zhou et al.
POLYMER (2009)
Fabrication and Properties of Carbon Fibers
Xiaosong Huang
MATERIALS (2009)
Interfacial studies on the O3 modified carbon fiber-reinforced polyamide 6 composites
J. Li
APPLIED SURFACE SCIENCE (2008)
Effects of preoxidation and carbonization technologies on tensile strength of PAN-based carbon fiber
Min Jing et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Surface modification of carbon fiber by redox-induced graft polymerization of acrylic acid
Zhiwei Xu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
A new method for the kinetic study of cyclization reaction during stabilization of polyacrylonitrile fibers
Yongping Hou et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Microstructural evolution in polyacrylonitrile fibers during oxidative stabilization
Meijie Yu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2008)
Structure and electrochemical properties of activated polyacrylonitrile based carbon fibers containing carbon nanotubes
Sudhakar Jagannathan et al.
JOURNAL OF POWER SOURCES (2008)
DSC STUDY OF STABILIZATION REACTIONS IN POLY(ACRYLO-NITRILE-co-ITACONIC ACID) WITH PEAK-RESOLVING METHOD
Q. Ouyang et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2008)
A template method for the synthesis of hollow carbon fibers
Zhi-Guo Shi et al.
MICROPOROUS AND MESOPOROUS MATERIALS (2008)
Carbon nanotube-based neat fibers
Natnael Behabtu et al.
NANO TODAY (2008)
Preparation and characterization of silica nanoparticulate-polyacrylonitrile composite and porous nanofibers
Liwen Ji et al.
NANOTECHNOLOGY (2008)
Mechanism and kinetics of the stabilization reactions of itaconic acid-modified polyacrylonitrile
Qin Ouyang et al.
POLYMER DEGRADATION AND STABILITY (2008)
Correlation of chemical shrinkage of polyacrylonitrile fibres with kinetics of cyclization
Johannis Simitzis et al.
POLYMER INTERNATIONAL (2008)
Characterization of highly selective microporous carbon hollow fiber membranes prepared from a commercial co-polyimide precursor
E. P. Favvas et al.
JOURNAL OF POROUS MATERIALS (2008)
High-performance carbon nanotube fiber
Krzysztof Koziol et al.
SCIENCE (2007)
Ultrastrong, stiff, and lightweight carbon-nanotube fibers
Xiefei Zhang et al.
ADVANCED MATERIALS (2007)
Effect of boric acid on the stabilization of poly(acrylonitrile-co-itaconic acid)
Qin Ouyang et al.
JOURNAL OF POLYMER RESEARCH (2007)
High performance fibres from 'Dog bone' carbon nanotubes
Marcelo Motta et al.
ADVANCED MATERIALS (2007)
Polymer-nanoinclusion interactions in carbon nanotube based polyacrylonitrile extruded and electrospun fibers
Linda Vaisman et al.
POLYMER (2007)
Structural evolution of polyacrylonitrile precursor fibers during preoxidation and carbonization
Minxia Ji et al.
POLYMER BULLETIN (2007)
Arbitrarily shaped fiber assemblies from spun carbon nanotube gel fibers
Joselito M. Razal et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Carbon-nanotube cotton for large-scale fibers
Lianxi Zheng et al.
ADVANCED MATERIALS (2007)
Chemical structure evolution and mechanism during pre-carbonization of PAN-based stabilized fiber in the temperature range of 350-600 °C
Min Jing et al.
POLYMER DEGRADATION AND STABILITY (2007)
Irradiation effects in carbon fibers after N+-ion irradiation
M. B. Ivanov et al.
SURFACE & COATINGS TECHNOLOGY (2007)
A review of heat treatment on polyacrylonitrile fiber
M. S. A. Rahaman et al.
POLYMER DEGRADATION AND STABILITY (2007)
Stabilization and carbonization of gel spun polyacrylonitrile/single wall carbon nanotube composite fibers
Han Gi Chae et al.
POLYMER (2007)
Preparation, characterization and gas permeation properties of carbon hollow fiber membranes based on Matrimid® 5218 precursor
E. P. Fawas et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Thermal behavior of polyacrylonitrile polymers synthesized under different conditions and comonomer compositions
Irina F. Catta Preta et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2007)
Plasma activation of carbon fibres for polyarylacetylene composites
Xuezhong Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Strong carbon-nanotube fibers spun from long carbon-nanotube arrays
Xiefei Zhang et al.
SMALL (2007)
Dual-layer hollow carbon fiber membranes for gas separation consisting of carbon and mixed matrix layers
Lan Ying Jiang et al.
CARBON (2007)
Bis-ortho-diynylarene polymerization as a route to solid and hollow carbon fibers
Huseyin Zengin et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Evolution of tension during the thermal stabilization of polyacrylonitrile fibers under different parameters
Meijie Yu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Nanoporous structured submicrometer carbon fibers prepared via solution electrospinning of polymer blends
Mao Peng et al.
LANGMUIR (2006)
Effect of thermal characteristics of commercial and special polyacrylonitrile fibres on the fabrication of carbon fibres
A. Shokuhfar et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Polymer nanocomposites containing carbon nanotubes
Mohammad Moniruzzaman et al.
MACROMOLECULES (2006)
Preparation and characterization of ultrafine electrospun polyacrylonitrile fibers and their subsequent pyrolysis to carbon fibers
Juthawan Sutasinpromprae et al.
POLYMER INTERNATIONAL (2006)
Small but strong: A review of the mechanical properties of carbon nanotube-polymer composites
Jonathan N. Coleman et al.
CARBON (2006)
PAN/SAN/SWNT ternary composite: Pore size control and electrochemical supercapacitor behavior
Chongfu Zhou et al.
POLYMER (2006)
Surfactant-free spinning of composite carbon nanotube fibers
Wilfrid Neri et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2006)
Determination of the degradation apparent activation energy of acrylonitrile/acrylic acid copolymers
C Hou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Fourier transform infrared and wide-angle X-ray diffraction studies of the thermal cyclization reactions of high-molar-mass poly(acrylonitrile-co-itaconic acid)
R Devasia et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Oriented and exfoliated single wall carbon nanotubes in polyacrylonitrile
HG Chae et al.
POLYMER (2006)
Effects of ammonia plasma treatment on the surface characteristics of carbon fibers
HC Wen et al.
SURFACE & COATINGS TECHNOLOGY (2006)
A comparison of reinforcement efficiency of various types of carbon nanotubes in poly acrylonitrile fiber
HG Chae et al.
POLYMER (2005)
Hot-drawing of single and multiwall carbon nanotube fibers for high toughness and alignment
P Miaudet et al.
NANO LETTERS (2005)
The effects of carbonization temperature on the properties and structure of PAN-based activated carbon hollow fiber
JF Sun et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
Mechanical and structural characterization of electrospun PAN-derived carbon nanofibers
E Zussman et al.
CARBON (2005)
Mechanical properties of continuously spun fibers of carbon nanotubes
M Motta et al.
NANO LETTERS (2005)
Influence of tension on the oxidative stabilization process of polyacrylonitrile fibers
GP Wu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
Spinning solid and hollow polymer-free carbon nanotube fibers
ME Kozlov et al.
ADVANCED MATERIALS (2005)
The processing, properties, and structure of carbon fibers
ML Minus et al.
JOM (2005)
UV assisted stabilization routes for carbon fiber precursors produced from melt-processible polyacrylonitrile terpolymer
AK Naskar et al.
CARBON (2005)
Dynamic mechanical relaxations in poly(acrylonitrile) with different stereoregularities
D Sawai et al.
MACROMOLECULES (2004)
Effect of moisture on stabilization of polyacrylonitrile fibers
GP Wu et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Direct spinning of carbon nanotube fibers from chemical vapor deposition synthesis
YL Li et al.
SCIENCE (2004)
Properties of carbon nanotube fibers spun from DNA-stabilized dispersions
JN Barisci et al.
ADVANCED FUNCTIONAL MATERIALS (2004)
Single wall carbon nanotube fibers extruded from super-acid suspensions: Preferred orientation, electrical, and thermal transport
W Zhou et al.
JOURNAL OF APPLIED PHYSICS (2004)
Polyacrylonitrile single-walled carbon nanotube composite fibers
TV Sreekumar et al.
ADVANCED MATERIALS (2004)
Macroscopic, neat, single-walled carbon nanotube fibers
LM Ericson et al.
SCIENCE (2004)
Multifunctional carbon nanotube yarns by downsizing an ancient technology
M Zhang et al.
SCIENCE (2004)
Carbon fibers and composites with epoxy resins: Topography, fractography and interphases
SL Gao et al.
CARBON (2004)
Preparation of carbonized fiber web from electrospinning of isotropic pitch
SH Park et al.
SYNTHETIC METALS (2004)
The influences of silicone finishes on thermooxidative stabilization of PAN precursor fibers
DB Jin et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Load transfer mechanism in carbon nanotube ropes
D Qian et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Electrospinning of continuous carbon nanotube-filled nanofiber yarns
F Ko et al.
ADVANCED MATERIALS (2003)
Incorporation of methyl acrylate in acrylonitrile based copolymers: effects on melting behavior
D Godshall et al.
POLYMER (2003)
Super-tough carbon-nanotube fibres -: These extraordinary composite fibres can be woven into electronic textiles.
AB Dalton et al.
NATURE (2003)
Cyclization reaction in poly(acrylonitrile/itaconic acid) copolymer: An isothermal differential scanning calorimetry kinetic study
R Devasia et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
UV stabilization route for melt-processible PAN-based carbon fibers
MC Paiva et al.
CARBON (2003)
Preparations of pitch-based CF/ACF webs by electrospinning
SH Park et al.
CARBON (2003)
Mechanisms of surfactant adsorption on non-polar, air-oxidized and ozone-treated carbon surfaces
X Chen et al.
CARBON (2003)
Structure of carbon fiber obtained from nanotube-reinforced mesophase pitch
T Cho et al.
CARBON (2003)
Preparation of carbon hollow fiber membranes by pyrolysis of polyetherimide
E Barbosa-Coutinho et al.
CARBON (2003)
Oxygen plasma modification of pitch-based isotropic carbon fibres
JP Boudou et al.
CARBON (2003)
Nanotechnology: Spinning continuous carbon nanotube yarns - Carbon nanotubes weave their way into a range of imaginative macroscopic applications.
KL Jiang et al.
NATURE (2002)
Novel hollow core fibers prepared from lignin polypropylene blends
JF Kadla et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Synthesis and characterization of acrylonitrile methyl acrylate statistical copolymers as melt processable carbon fiber precursors
VA Bhanu et al.
POLYMER (2002)
Dynamic oscillatory shear properties of potentially melt processable high acrylonitrile terpolymers
P Rangarajan et al.
POLYMER (2002)
Chemical modification of carbon fiber surfaces
F Severini et al.
CARBON (2002)
Films and fibers of oriented single wall nanotubes
P Poulin et al.
CARBON (2002)
Texture of PAN- and pitch-based carbon fibers
O Paris et al.
CARBON (2002)
A study of pitch-based precursors for general purpose carbon fibres
E Mora et al.
CARBON (2002)
Thermal behaviour of acrylonitrile copolymers having methacrylic and itaconic acid comonomers
P Bajaj et al.
POLYMER (2001)
Macroscopic fibers and ribbons of oriented carbon nanotubes
B Vigolo et al.
SCIENCE (2000)
Carbon fibers for composites
S Chand
JOURNAL OF MATERIALS SCIENCE (2000)
Atomistic theory of mechanical relaxation in fullerene nanotubes
BI Yakobson et al.
CARBON (2000)
Structure of melt-blown mesophase pitch-based carbon fiber
F Watanabe et al.
CARBON (2000)
Mechanical, surface and interfacial characterisation of pitch and PAN-based carbon fibres
MC Paiva et al.
CARBON (2000)
Mesoscopic texture at the skin area of mesophase pitch-based carbon fiber
SH Hong et al.
CARBON (2000)
Anodic surface oxidation for pitch-based carbon fibers and the interfacial bond strengths in epoxy matrices
A Fukunaga et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
分享论文
