Benzyl ester of dehydrated castor oil fatty acid as plasticizer for poly(vinyl chloride)

The poly(vinyl chloride) (PVC) industry plays an important role in today's total plastics industry. The major volume of PVC is used as soft and plasticized PVC. PVC applications consume approximately 80% of the total production of plasticizers. Most of the common plasticizers are aromatic esters of phthalic acid. In the majority of countries, phthalate plasticizers are banned due to their carcinogenic properties. The concern raised about toxicity led to a large demand for bio-based non-toxic plasticizers. Hence, there is an increasing interest in replacing the phthalate plasticizers with those produced from simple bio-based materials. Dehydrated castor oil fatty acid (DCOFA) is a renewable resource which can be esterified and used as an environment friendly plasticizer for PVC. Benzyl ester (BE) was prepared by reacting DCOFA with benzyl alcohol in the presence of catalyst at 170-180 degrees C. Esterification was further confirmed by acid value, hydroxyl number, H-1 NMR and Fourier transform IR spectroscopy. The modified plasticizer was used in various proportions as a co-plasticizer in PVC for partial replacement of dioctyl phthalate (DOP). With an increase in the proportion of BE in PVC samples, a good plasticizing performance was observed. The incorporation of BE also resulted in a reduction in viscosity and viscosity pick-up and improved mechanical, exudation, thermal degradation and chemical resistance properties. The presence of BE showed a reduction in the whiteness index due to presence of conjugated double bonds in the structure. The results of DSC, XRD and Shore hardness studies showed no significant variation in properties compared with those of DOP-plasticized sheets and thus we can conclude that BE can be used as a co-plasticizer in PVC. (C) 2013 Society of Chemical Industry