Imaging Protein Deposits on Contact Lens Materials

Purpose. The majority of studies investigating protein deposition on contact lens materials require that the deposit of interest be removed, potentially resulting in erroneous results if some proteins are not removed adequately. The purpose of this study was to investigate the use of in situ imaging methods to examine protein deposition on conventional poly(2-hydroxyethyl methacrylate) (polyHEMA)-based and silicone hydrogel contact lens materials. Methods. Six silicone hydrogel and five polyHEMA-hased hydrogel contact lens materials were examined by Atomic Force Microscopy (AFM) and/or Scanning Electron Microscopy (SEM) techniques, after being deposited with proteins in an in vitro model. AFM Studies examined lenses deposited solely with lysozyme at approximate physiological concentrations and SEM Studies were conducted on lenses exposed to a dilute mixture of lysozyme and albumin-conjugated gold spheres. Results. AFM Studies demonstrated that the lens materials had markedly differing Surface topographies. SEM results showed that galyfilcon A and balafilcon A lenses deposited both lysozyme and albumin in relatively large aggregates, as compared with lotrafilcon A and 13, in which the proteins were deposited in a more evenly spread, monolayer formation. Polymacon lenses deposited more protein than any of the silicone hydrogel materials and much of the protein was aggregated together. AFM data indicated that balafilcon A, lotrafilcon A and polymacon deposited lysozyme in a similar manner, with very little lysozyme being deposited in discrete areas. Galyfilcon A behaved very differently, with the lysozyme exhibiting both aggregates as well as string-like fort-nations over the lens surface. Conclusions. Imaging techniques that allow proteins to be examined in situ show Much promise for determining the extent and physical characterization of protein on contact lens materials. These techniques indicate that the pattern of deposition of proteins onto silicone hydrogel contact lens materials differs between materials, depending upon their bulk and Surface composition.