ENTROPY GENERATION MINIMIZATION VERSUS THERMAL MIXING DUE TO NATURAL CONVECTION IN DIFFERENTIALLY AND DISCRETELY HEATED SQUARE CAVITIES

Uniform temperature distribution is a key parameter in many thermal processing applications. A considerable amount of additional energy is used to enhance the fluid mixing in order to maintain the temperature uniformity, but that affects the overall efficiency of the process. In this article, an alternate approach is proposed for maintaining uniform temperature via various distributed/discrete heating strategies while maintaining the minimal entropy generation. The system of laminar natural convection in differentially and discretely heated square cavities filled with various materials (molten metals, air, aqueous solutions, oils) is considered, and finite element simulations are performed for a range of Rayleigh numbers (Ra = 10(3)-10(5)). Entropy generation is evaluated using finite-element basis sets for the first time in this work, and the derivatives at particular nodes are estimated based on the functions within adjacent elements. Analysis of entropy generation in each case is carried out and a detailed investigation of entropy production due to local heat transfer and fluid friction irreversibilities is presented. It is found that a high thermal mixing may not be the optimal situation for achieving uniform temperature distribution based on entropy production. A greater degree of temperature uniformity with moderate thermal mixing may correspond to minimum entropy generation with distributed heating. Further, based on entropy generation minimization approach, it has been thermodynamically established that the distributed heating methodology with multiple heat sources may be the energy efficient strategy for attaining adequate uniform temperature distribution with minimum entropy generation.