A cost-effective method for the treatment of reject water from sludge dewatering process using supernatant from sludge lime stabilization

This paper describes a cost-effective method for phosphorus removal from reject water of sludge dewatering process by using supernatant from sludge lime stabilization (SLS) processes, which are extensively used in China. Supernatant from SLS processes contains high concentration of calcium and high alkalinity hindering COD and ammonium nitrogen removal but favoring phosphate precipitation. Effects of pH and dosing ratio between supernatant and reject water on simultaneous removal of phosphorus and organic substances were evaluated. Both pH and Ca/P ratio increased with increasing dosing ratio of supernatant and reject water. The phosphorus removal achieved 90% when dosing ratio maintained above 15%. COD and humic substances were also effectively removed from reject water by adding SLS supernatant. X-ray diffraction analysis and morphology of harvested precipitates revealed that when pH increased from 7.49 to 9.77, the crystallinity increased, and hydroxyapatite converted to tri-calcium phosphate simultaneously. This method not only saves costs for chemical precipitants, but also favors nutrient removal by increasing alkalinity for nitrification and adding carbon source for denitrification, meanwhile reduces risks of pipeline blockage in wastewater treatment plants. (C) 2015 Elsevier B.V. All rights reserved.