期刊
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW
卷 32, 期 2, 页码 90-104出版社
TAYLOR & FRANCIS INC
DOI: 10.1080/08827508.2010.530720
关键词
beneficiation; copper leaching; LIX 984N; solvent extraction; waste printed circuit boards
资金
- Korea Institute of Energy Technology Evaluation and Planning (KETEP)
- Korea Institute of Geoscience and Mineral Resources
Present paper focuses on the selective recovery of copper from the enriched ground printed circuit boards (PCBs) using leaching and solvent extraction. The metal-enriched ground sample obtained from the beneficiation of the sized PCBs in a laboratory scale column type air separator contained mainly 49.3% Cu, 3.83% Fe, 1.51% Ni, 5.45% Sn, 4.71% Pb, and 1.85% Zn. The leaching of the enriched sample with 3.5mol/L nitric acid dissolved 99% copper along with other metals at 323K temperature and 120g/L pulp density in 1h time. The composition of the leach liquor with wash solution was found to be 42.11g/L Cu, 2.12g/L Fe, 4.02g/L Pb, 1.58g/L Zn, and 0.4g/L Ni. The McCabe-Thiele plot indicated the requirements of three counter-current stages for maximum extraction of copper from the leach liquor at pH 1.5 using 30, 40, and 50% (v/v) LIX 984N at the phase ratios (A/O) of 1:3, 1:2, and 1:1.5, respectively. The counter-current simulation studies show the selective extraction of 99.7% copper from the leach liquor feed of 1.5 pH in three stages with 50% LIX 984N at A/O phase ratio of 1:1.5. The stripping of copper from the loaded organic with sulfuric acid produced copper sulfate solution from which copper metal/powder could be recovered by electrolysis/ hydrogen reduction.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据