期刊
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
卷 494, 期 1-2, 页码 263-275出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.msea.2008.04.026
关键词
Al-killed steel; Hot ductility; Boron nitride; Aluminium nitride; Sulphides
类别
资金
- DST/NRF Centre of Excellence in Strong Materials and Arcelor Mittal
- IMMRI, University of Pretoria
The influence of boron to nitrogen ratio, strain rate and cooling rate on hot ductility of aluminium-killed, low carbon, boron microalloyed steel was investigated. Hot tensile testing was performed on steel samples reheated in argon to 1300 degrees C, cooled at rates of 0.3, 1.2 and 3.0 degrees Cs-1 to temperatures in the range 750-1050 degrees C, and then Strained to failure at initial strain rates of 1 x 10(-4) or 1 x 10(-3)s(-1). It was found that the steel with a B:N ratio of 0.19 showed deep hot ductility troughs for all tested conditions; the steel with a B:N ratio of 0.47 showed a deep ductility trough for a high cooling rate of 3.0 degrees Cs-1 and the steel with a near-stoichiometric B:N ratio of 0.75 showed no ductility troughs for the tested conditions. The ductility troughs extended from similar to 900 degrees C (near the Ae(3) temperature) to similar to 1000 or 1050 degrees C in the singlephase austenite region. The proposed mechanism of hot ductility improvement with increase in B:N ratio in these steels is that the B removes N from solution, thus reducing the strain-induced precipitation of AlN. Additionally, BN co-precipitates with sulphides, preventing precipitation of fine MnS, CuS and FeS, and forming large, complex precipitates that have no effect on hot ductility. (C) 2008 Elsevier B.V. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据