相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy
Bizhan Rahmati et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide(MoS2) nanolubrication in end milling machining
Bizhan Rahmati et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption
Mohd Sayuti et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system
Mohd Sayuti et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Effect of CuO and ZnO nanofluids in xanthan gum on thermal, electrical and high pressure rheology of water-based drilling fluids
Jay Karen Maria William et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2014)
Investigation of thermal conductivity and rheological properties of nanofluids containing graphene nanoplatelets
Mohammad Mehrali et al.
NANOSCALE RESEARCH LETTERS (2014)
Investigation of viscosity and thermal conductivity of alumina nanofluids with addition of SDBS
B. LotfizadehDehkordi et al.
HEAT AND MASS TRANSFER (2013)
Thermal and rheological properties of oil-based nanofluids from different carbon nanostructures
Ehsan-o-Ilah Ettefaghi et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)
The influence of spraying parameters on grinding performance for nanofluid minimum quantity lubrication
Cong Mao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy
M. Sayuti et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system
M. Sayuti et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Enhancement of surface finish using water-miscible nano-cutting fluid in ultra-precision turning
C. Y. Chan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Minimum quantity lubrication-MQL turning of AISI 4140 steel alloy
Mohammadjafar Hadad et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Investigation on the Effect of Nanofluid Parameters on MQL Grinding
Cong Mao et al.
MATERIALS AND MANUFACTURING PROCESSES (2013)
Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication (MQL) grinding
Parash Kalita et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Thermal conductivity and rheological properties of graphite/oil nanofluids
Baogang Wang et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2012)
Thermal and rheological characteristics of CuO-Base oil nanofluid flow inside a circular tube
M. Saeedinia et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2012)
Study on minimum quantity lubrication in micro-grinding
Kuan-Ming Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
AFM investigation in grinding process with nanofluids using Taguchi analysis
Sethuramalingam Prabhu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system
Ahmed A. D. Sarhan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
A review and analysis on influence of temperature and concentration of nanofluids on thermophysical properties, heat transfer and pumping power
Ravikanth S. Vajjha et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Nano-Cutting Fluid for Enhancement of Metal Cutting Performance
S. Khandekar et al.
MATERIALS AND MANUFACTURING PROCESSES (2012)
Carbon nanotube glycol nanofluids: Photo-thermal properties, thermal conductivities and rheological behavior
Zhaoguo Meng et al.
PARTICUOLOGY (2012)
Ultrasonication effects on thermal and rheological properties of carbon nanotube suspensions
Binglu Ruan et al.
NANOSCALE RESEARCH LETTERS (2012)
Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants
Parash Kalita et al.
Journal of Manufacturing Processes (2012)
Thermal Conductivities, Rheological Behaviors and Photothermal Properties of Ethylene Glycol-based Nanofluids Containing Carbon Black Nanoparticles
Zhaoguo Meng et al.
IUMRS INTERNATIONAL CONFERENCE IN ASIA 2011 (2012)
Investigation of Grinding Characteristic using Nanofluid Minimum Quantity Lubrication
Cong Mao et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2012)
An Experimental Study on Micro-Grinding Process with Nanofluid Minimum Quantity Lubrication (MQL)
Pi-Ho Lee et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2012)
Experimental characterization of micro-drilling process using nanofluid minimum quantity lubrication
Jung Soo Nam et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Viscosity and thermal conductivity of nanofluids containing multi-walled carbon nanotubes stabilized by chitosan
Tran X. Phuoc et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)
Effect of Nano-Enhanced Lubricant in Minimum Quantity Lubrication Balling Milling
Kyung-Hee Park et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2011)
A review on applications and challenges of nanofluids
R. Saidur et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Thermal conductivity and viscosity measurements of ethylene glycol-based Al2O3 nanofluids
Maria Jose Pastoriza-Gallego et al.
NANOSCALE RESEARCH LETTERS (2011)
Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel
P. Vamsi Krishna et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Experimental evaluation of minimum quantity lubrication in near micro-milling
Kuan-Ming Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Nano surface generation of grinding process using carbon nano tubes
S. Prabhu et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2010)
Preparation, characterization, viscosity and thermal conductivity of CaCO3 aqueous nanofluids
Zhu HaiTao et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2010)
Review of convective heat transfer enhancement with nanofluids
Sadik Kakac et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
An investigation of graphite nanoplatelets as lubricant in grinding
Matthew Alberts et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
A Study on The Tribological Characteristics of Graphite Nano Lubricants
Chang-Gun Lee et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2009)
Thermal Conductivity and Viscosity Measurements of Water-Based TiO2 Nanofluids
A. Turgut et al.
INTERNATIONAL JOURNAL OF THERMOPHYSICS (2009)
Review of nanofluids for heat transfer applications
Dongsheng Wen et al.
PARTICUOLOGY (2009)
Applicability of cutting fluids with nanoparticle inclusion as coolants in machining
R. R. Srikant et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2009)
Investigation of thermal conductivity and viscosity of ethylene glycol based ZnO nanofluid
Wei Yu et al.
THERMOCHIMICA ACTA (2009)
Understanding the Role of Nanoparticles in Nano-oil Lubrication
Kwangho Lee et al.
TRIBOLOGY LETTERS (2009)
Investigations of thermal conductivity and viscosity of nanofluids
S. M. S. Murshed et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2008)
Heat transfer and flow behaviour of aqueous suspensions of titanate nanotubes (nanofluids)
Haisheng Chen et al.
POWDER TECHNOLOGY (2008)
Application of Nanofluids in Minimum Quantity Lubrication Grinding
Bin Shen et al.
TRIBOLOGY TRANSACTIONS (2008)
Performance profiling of minimum quantity lubrication in machining
Kuan-Ming Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Heat transfer and flow behaviour of aqueous suspensions of TiO2 nanoparticles (nanofluids) flowing upward through a vertical pipe
Yurong He et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
Study of thermal conductivity of nanofluids for the application of heat transfer fluids
Dae-Hwang Yoo et al.
THERMOCHIMICA ACTA (2007)
Experimental analysis of tribological properties of lubricating oils with nanoparticle additives
Y. Y. Wu et al.
WEAR (2007)
Nano liquid-metal fluid as ultimate coolant
Kun-Quan Ma et al.
PHYSICS LETTERS A (2007)
Turning of brasses using minimum quantity of lubricant (MQL) and flooded lubricant conditions
J. Paulo Davim et al.
MATERIALS AND MANUFACTURING PROCESSES (2007)
Enhancement of thermal conductivity with Cu for nanofluids using chemical reduction method
Min-Sheng Liu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Thermal and rheological properties of carbon nanotube-in-oil dispersions
Ying Yang et al.
JOURNAL OF APPLIED PHYSICS (2006)
Experimental investigation to study the effect of solid lubricants on cutting forces and surface quality in end milling
NSK Reddy et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel
NR Dhar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Effect of MQL on the tool life of small twist drills in deep-hole drilling
R Heinemann et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Empirical correlation finding the role of temperature and particle size for nanofluid (Al2O3) thermal conductivity enhancement -: art. no. 153107
CH Chon et al.
APPLIED PHYSICS LETTERS (2005)
Biomass energy potential and future prospect in Sudan
AM Omer
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2005)
Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy
HA Kishawy et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Optimizing the use of dry cutting in rough turning steel operations
AE Diniz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Investigation of the mending effect and mechanism of copper nano-particles on a tribologically stressed surface
G Liu et al.
TRIBOLOGY LETTERS (2004)
Dry machining and minimum quantity lubrication
K Weinert et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Mechanism of action of colloidal solid dispersions
F Chiñas-Castillo et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2003)
Antiwear effect of fullerene C60 additives to lubricating oils
BM Ginzburg et al.
RUSSIAN JOURNAL OF APPLIED CHEMISTRY (2002)
Cutting conditions for finish turning process aiming: the use of dry cutting
AE Diniz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Application of molybdenum complexes of 1-aryl-2,5-dithiohydrazodicarbonamides as extreme pressure lubricant additives
RB Rastogi et al.
WEAR (2002)
Using a minimum quantity of lubricant (MQL) and a diamond coated tool in the drilling of aluminum-silicon alloys
DU Braga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Preparation and tribological properties of nanometer magnesium borate as lubricating oil additive
ZS Hu et al.
WEAR (2002)
Mechanism of friction of fullerenes
L Rapoport et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2002)
Anomalous thermal conductivity enhancement in nanotube suspensions
SUS Choi et al.
APPLIED PHYSICS LETTERS (2001)
Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles
JA Eastman et al.
APPLIED PHYSICS LETTERS (2001)
Dry machining: Machining of the future
PS Sreejith et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)