Mechanical and Metallurgical Studies in Double Shielded GMAW of Dissimilar Stainless Steels

In the present work, a simple arrangement is made to provide double layer shielding gas supply in addition to primary shielding during gas metal arc welding (GMAW) of two dissimilar stainless steels, i.e., AISI 316 and duplex 2205. Influences of double layer shielding in addition to five more process parameters like welding current, voltage, material of the electrode wire, the type of primary shielding gas, and flow rate on joint tensile strength and fusion zone microhardness are studied. An experimental design technique is used to design the experimental conditions and the results are analyzed to observe the influences of each process parameter and their interactions. The tensile strength is more influenced by the electrode material and the type of shielding, whereas current, interaction between currentxvoltage and currentxflow rate significantly influence microhardness. Welding voltage influences both tensile strength and microhardness. Double layer shielding with CO2 as an outer shielding layer helps in controlling the cooling rate which improves the tensile strength and microhardness. Microstructural observations by scanning electron microscopy reveal that moderate to low heat input with a single layer of shielding results in poor joint strength and severe damage or lack of fusion, and the duplex 2205 filler gives the maximum joint strength due to the presence of a ferrite structure.