相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Failure mode of laser welds in lap-shear specimens of high strength low alloy (HSLA) steel sheets
K. Asim et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2012)
Recent development in finite element analysis of self-piercing riveted joints
Xiaocong He et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Crack retardation mechanism due to overload in base material and laser welds of Al alloys
S. Daneshpour et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Fatigue strength of laser beam welded automotive components made of thin steel sheets considering size effects
J. Baumgartner et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Laser pulsed welding in thin sheets of Zircaloy-4
Quhon Han et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Laser micro-welding of aluminum and copper with and without tin foil alloy
Mohammad M. Hailat et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2012)
Finite-element thermal analysis of laser welding of galvanized high-strength steel in a zero-gap lap joint configuration and its experimental verification
Junjie Ma et al.
MATERIALS & DESIGN (2012)
Real-time monitoring of laser welding of galvanized high strength steel in lap joint configuration
Fanrong Kong et al.
OPTICS AND LASER TECHNOLOGY (2012)
Optimization of weld bead geometry in laser welding with filler wire process using Taguchi's approach
Yang Dongxia et al.
OPTICS AND LASER TECHNOLOGY (2012)
Welding of polymers using a 2 μm thulium fiber laser
Ilya Mingareev et al.
OPTICS AND LASER TECHNOLOGY (2012)
Effects of temperature-dependent material properties and shielding gas on molten pool formation during continuous laser welding of AZ91 magnesium alloy
Sana Bannour et al.
OPTICS AND LASER TECHNOLOGY (2012)
Analysis of a fibre laser welding case study, utilising a matrix flow chart
J. Karlsson et al.
APPLIED SURFACE SCIENCE (2011)
Numerical and experiment analysis of residual stress on magnesium alloy and steel butt joint by hybrid laser-TIG welding
Zhi Zeng et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
Numerical simulation of the electron beam welding process
Piotr Lacki et al.
COMPUTERS & STRUCTURES (2011)
Stress intensity factor solutions for estimation of fatigue lives of laser welds in lap-shear specimens
Kulthida Sripichai et al.
ENGINEERING FRACTURE MECHANICS (2011)
Modeling of failure mode of laser welds in lap-shear specimens of HSLA steel sheets
Jaewon Lee et al.
ENGINEERING FRACTURE MECHANICS (2011)
A review of finite element analysis of adhesively bonded joints
Xiaocong He
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2011)
Numerical simulation of laser-tungsten inert arc deep penetration welding between WC-Co cemented carbide and invar alloys
Pei-quan Xu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Laser welding of Haynes 188 alloy sheet: thermal stress analysis
Bekir Sami Yilbas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Finite element analysis of metallurgical phase transformations in AA 6056-T4 and their effects upon the residual stress and distortion states of a laser welded T-joint
Muhammad Zain-ul-abdein et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2011)
Numerical and Experimental Investigation of Tensile Behavior of Laser Beam Welded TRIP700 Steel
Uwe Reisgen et al.
ISIJ INTERNATIONAL (2011)
Numerical simulation and experimental investigation of laser overlap welding of Ti6Al4V and 42CrMo
Shusen Zhao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Numerical and experimental study of thermally induced residual stress in the hybrid laser-GMA welding process
Fanrong Kong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Fatigue resistance of titanium laser and hybrid welded joints
C. Casavola et al.
MATERIALS & DESIGN (2011)
Generalising fatigue stress analysis of different laser weld geometries
M. M. Alam et al.
MATERIALS & DESIGN (2011)
Improving interfacial reaction nonhomogeneity during laser welding-brazing aluminum to titanium
Shuhai Chen et al.
MATERIALS & DESIGN (2011)
Compatible finite element modelling of laser welded region for crash analysis of autobody assemblies
J. Ha et al.
MATERIALS RESEARCH INNOVATIONS (2011)
Fatigue Failure of Laser Welds in Lap-Shear Specimens of High Strength Low Alloy (HSLA) Steels under Cyclic Loading Conditions
Kamran Asim et al.
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2011)
Analysis of Laser and Resistance Spot Weldments on Press-Hardened Steel
Minjung Kang et al.
ECO-MATERIALS PROCESSING AND DESIGN XII (2011)
The influence of surface geometry and topography on the fatigue cracking behaviour of laser hybrid welded eccentric fillet joints
M. M. Alam et al.
APPLIED SURFACE SCIENCE (2010)
Residual stresses analysis of ND-YAG laser welded joints
J. M. Costa et al.
ENGINEERING FAILURE ANALYSIS (2010)
Recent development in finite element analysis of clinched joints
Xiaocong He
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Optimization of Laser Transmission Welding Process for Thermoplastic Composite Parts using Thermo-Mechanical Simulation
G. N. Labeas et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Finite volume model for laser-soot interaction for a laser transmission welding process
L. S. Mayboudi et al.
JOURNAL OF LASER APPLICATIONS (2010)
Finite element simulation of magnesium alloys laser beam welding
Asma Belhadj et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
3D finite element modeling of the thermally induced residual stress in the hybrid laser/arc welding of lap joint
Fanrong Kong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
A comprehensive numerical stress-strain analysis of laser beam butt-welded titanium compared with austenitic steel joints
C. Casavola et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2010)
Laser Beam Welding of AZ31 Magnesium Alloy with Filler Strip
Qiong Chen et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Autogenous Laser Keyhole Welding of AISI 316LTi
Clayton D'Amato et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Low-Power Laser/TIG Hybrid Welding Process of Magnesium Alloy with Filler Wire
Liming Liu et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Effect of Fiber Laser-MIG Hybrid Process Parameters on Weld Bead Shape and Tensile Properties of Commercially Pure Titanium
Cui Li et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Finite-element modelling and updating of laser spot weld joints in a top-hat structure for dynamic analysis
N. A. Husain et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2010)
Adaptive finite element models applied to the laser welding problem
J. Montalvo-Urquizo et al.
COMPUTATIONAL MATERIALS SCIENCE (2009)
A multiphase mechanical model for Ti-6Al-4V: Application to the modeling of laser assisted processing
A. Longuet et al.
COMPUTATIONAL MATERIALS SCIENCE (2009)
Some studies on temperature profiles in AISI 304 stainless steel sheet during laser beam welding using FE simulation
N. Siva Shanmugam et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Prediction of residual stresses and distortions due to laser beam welding of butt joints in pressure vessels
G. A. Moraitis et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2009)
Development of a finite element based heat transfer model for conduction mode laser spot welding process using an adaptive volumetric heat source
S. Bag et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2009)
Residual stress analysis of laser spot welding of steel sheets
P. Martinson et al.
MATERIALS & DESIGN (2009)
Effect of Laser Welding Variables on the Formability of 3wt% Si-Added Steel Welds
Joon Sik Park et al.
MATERIALS AND MANUFACTURING PROCESSES (2009)
Study on hybrid heat source overlap welding of magnesium alloy AZ31B
G. L. Liang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Influence of the silicon content on the mechanical properties of AA6xxx laser welds
D. Fabregue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Experimental and numerical study of static and fatigue properties of titanium alloy welded joints
C. Casavola et al.
MECHANICS OF MATERIALS (2009)
Formability Analysis of Diode-Laser-Welded Tailored Blanks of Advanced High-Strength Steel Sheets
S. K. Panda et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Optimisation of laser welding process for thermoplastic composite materials with regard to component quality and cost
Ch. V. Katsiropoulos et al.
PLASTICS RUBBER AND COMPOSITES (2009)
A study of laser welding modes with varying beam energy levels
G. Buvanashekaran et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2009)
Finite element analysis of effects of soft zones on formability of laser welded advanced high strength steels
S. K. Panda et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Modal testing and finite element model updating of laser spot welds
N. Abu Husain et al.
7TH INTERNATIONAL CONFERENCE ON MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS (2009)
Fatigue Behavior of Laser Welds in Lap-Shear Specimens of High Strength Low Alloy (HSLA) Steels
K. Sripichai et al.
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2009)
Thermoviscoplastic modelling of asymmetric effects for polymers at large strains
R. Mahnken et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)
Numerical simulations and experimental results of tensile test behavior of laser butt welded DP980 steels
S. K. Panda et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2008)
Self-pierce riveting for sheet materials: State of the art
Xiaocong He et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Optimization of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method
X. Cao et al.
MATERIALS AND MANUFACTURING PROCESSES (2008)
Process parameters optimization of laser beam welded joints by neural network
S. Missori et al.
MATERIALS AND MANUFACTURING PROCESSES (2008)
Simulation of the residual stresses in the contour laser welding of thermoplastics
H. Potente et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Use of a multivariate optimization algorithm to develop a self-consistent numerical heat transfer model for laser spot welding
S. Bag et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
A study on the plasma-augmented laser welding for small-diameter STS tubes
S. H. Yoon et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Investigation on the residual stress of AISI 4047 low alloy steel laser welded
G. Casalino et al.
SHEET METAL 2007 (2007)
Analysis of beam material interaction in welding of titanium with fiber lasers
Alexandra Costa et al.
MATERIALS AND MANUFACTURING PROCESSES (2007)
Materials behavior in laser welding of hardmetals to steel
A Costa et al.
MATERIALS AND MANUFACTURING PROCESSES (2006)
Pulse pressure loading of aircraft structural panels
M. C. Simmons et al.
THIN-WALLED STRUCTURES (2006)
Temperature criterion of laser welding for joining aluminum alloy with low-carbon steel
JJ Ding et al.
MATERIALS AND MANUFACTURING PROCESSES (2006)
Continuous wave Nd : YAG laser welding of sand-cast ZE41A-T5 magnesium alloys
X Cao et al.
MATERIALS AND MANUFACTURING PROCESSES (2005)
Dynamic impact analysis of the grid structure using multi-point constraint (MPC) equation under the lateral impact load
KH Yoon et al.
COMPUTERS & STRUCTURES (2004)
Numerical evaluation of residual stress relaxation by cyclic load
V Dattoma et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2004)
分享论文
