Optimization of plastic injection molding process parameters for manufacturing a brake booster valve body

The plastic injection molding (PIM) process parameters have been investigated for manufacturing a brake booster valve body. The optimal PIM process parameters is determined with the application of computeraided engineering integrating with the Taguchi method to improve the compressive property of the valve body. The parameters considered for optimization are the following: number of gates, gate size, molding temperature, resin temperature, switch over by volume filled, switch over by injection pressure, and curing time. An orthogonal array of L18 is created for the statistical design of experiments based on the Taguchi method. Then, Mold-Flow analyses are performed by using the designed process parameters based on the L18 orthogonal array. The signal-to-noise (S/N) ratio and the analysis of variance (ANOVA) are used to find the optimal PIM process parameters and to figure out the impact of the viscosity of resin, curing percentage, and compressive strength on a brake booster valve body. When compared with the average compression strength out of the 18 design experiments, the compression strength of the valve body produced using the optimal PIM process parameters showed a nearly 12% improvement. (c) 2013 Elsevier Ltd. All rights reserved.