pH-Responsive Aqueous Foams Stabilized by Hairy Latex Particles

Polystyrene (PS) latex particles carrying pH-responsive poly[2-(diethylamino)ethyl methacrylate] (PDEA) hair (PDEA-PS particles) were synthesized by dispersion polymerization and characterized in terms of diameter, diameter distribution, morphology, chemical composition, surface chemistry, and pH-response using scanning electron microscopy (SEM), elemental microanalysis, H-1 nuclear magnetic resonance spectroscopy, the laser diffraction method, and zeta potential measurements. The hairy particles can act as pH-responsive stabilizers of aqueous foams by adsorption at the air-water surface Above pH 8.0, where particles have nonprotonated PDEA hair, which is relatively hydrophobic, particle stabilized foams are stable for at least 1 month. Optical microscopy and SEM confirmed that flocculated PDEA-PS latex particles were adsorbed at the air-water interface and stabilized the aqueous foams. At pH 6.1 and 7.1, relatively stable foams can be prepared that remain stable for at least 24 h. SEM studies indicated that the PDEA-PS particles were adsorbed at the air water interface as a monolayer at pH 6.1. At pH 5.1 and 3.1, where the particles have cationic water-soluble PDEA hairs with hydrophilic character, no foam was formed. Rapid defoamation can be induced by lowering the solution pH; the addition of acid Caused the in situ protonation of 2-(diethylamino)ethyl methacrylate residues, which impart water-soluble hydrophilic character to the PDEA hair, and the PDEA-PS particles desorbed from the air water interface. The foaming and defoaming cycles could be repeated at least five times.