NICKEL FERRITE NANOPARTICLES SYNTHESIS FROM NOVEL FUMARATO-HYDRAZINATE PRECURSOR

Nickel ferrite is technologically important magnetic material extensively used in high frequency applications such as microwave device due to its high resistivity and sufficiently low losses. It also finds application in the ferrofluids technology. Therefore, ultrafine nickel ferrite was prepared by autocatalytic combustion of novel nickel ferrous fumarato-hydrazinate precursor. The precursor was characterized by IR, AAS, TG and DTA, and a chemical formula of NiFe(2)(C(4)H(2)O(4))(3)center dot 6N(2)H(4) was fixed. This precursor once ignited with a burning splinter at room temperature, glows and the glow spreads over the entire bulk completing the autocatalytic combustion of the precursor to ultrafine ferrite. The single phase fort-nation of ultrafine nickel ferrite was confirmed by XRD, IR spectra and TEM. The average particle size of the ultrafine ferrite was found to be similar to 20 nm by TEM. The observed lower value of saturation magnetization for nickel ferrite was due to the superparamagnetic nature of the particles, which increased with the increasing sintering temperature. The ultrafine nickel ferrite was then sintered at 1000 degrees C for 5 h and was characterized by XRD, IR spectra, SEM and TEM. The variation of resistivity, Seebeck coefficient and a.c. susceptibility as a function of temperature was measured for NiFe(2)O(4) and the results are discussed.