A new approach for isothermal calorimetric technique

Using flexible heat flux sensors mounted on the lateral and bottom of outside reactor wall, a new approach is developed for isothermal calorimetric technique to overcome the disadvantages of heat flow calorimetric methods. Although the proposed system needs a calibration procedure before or after the reaction completion to evaluate the lateral heat transfer area, the measurement is versatile and totally independent of the reaction media, jacket fluid, and the variations of heat transfer coefficient. Knowledge of the variations of the heat transfer coefficient is essential for the effective control and scale up of a reactor and can be inferred by the new method during the reaction. The stirrer power and the heat loss can be determined easily as well. No pre-calibration is needed for the sensors and no heating element is applied inside the reactor for temperature control. Experiments are carried out to validate the performance of the new proposed technique. With the help of a heater, the heat generated in the reactor is measured at various levels of power input. The predicted heater power inputs are in good agreement with the corresponding heat inputs. The relative detection limit in the range of 0.8-1 W L-1 is expected for this technique. Using the hydrolysis of acetic anhydride, the heat of reaction at 25A degrees C is determined, which is within the range reported in the literatures. The capability of the system to deal with the variations in the overall heat transfer coefficient is also demonstrated using a simulated reaction.