相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Mechanical recycling and composition effects on the properties and structure of hardwood cellulose-reinforced high density polyethylene eco-composites
Carmen Fonseca-Valero et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Use of macro plastic fibres in concrete: A review
Shi Yin et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Preparation and rheology characterization of branched polypropylene during reactive extrusion process
Kimia Mohebbi et al.
IRANIAN POLYMER JOURNAL (2015)
Processability and mechanical properties of extensively recycled high density polyethylene
Pavel Oblak et al.
POLYMER DEGRADATION AND STABILITY (2015)
Defective structure, plastic properties, and reactivity of mechanically activated magnesium
A. N. Streletskii et al.
RUSSIAN JOURNAL OF PHYSICAL CHEMISTRY B (2015)
Effects of Thermo-Fatigue Loading, Hydrostatic Pressure, and Heat Aging on the Free-Volume and Crystalline Structure of Polypropylene-co-Ethylene Random Copolymer Pipes
Suleyman Deveci et al.
POLYMER ENGINEERING AND SCIENCE (2015)
A viscosity model for technical polymers describing chemical and physical aging
Felix A. Heinzler et al.
POLYMER ENGINEERING AND SCIENCE (2015)
Towards an accurate simulation of the crystallisation process in injection moulded plastic components by hybrid parallelisation
Sandra Wienke et al.
INTERNATIONAL JOURNAL OF HIGH PERFORMANCE COMPUTING APPLICATIONS (2014)
Eggshell membrane templated Y2O3@Pd catalyst for enhanced methanol oxidation and CO tolerance
X. Chen et al.
MATERIALS RESEARCH INNOVATIONS (2014)
Static and Dynamic Compressive Properties of Polypropylene/Zinc Oxide Nanocomposites
Mohd Firdaus Omar et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Properties and performance of a simulated consumer polymer waste-coal combustion byproduct composite material
Herman Potgieter et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Morphology and Properties of Highly Filled iPP/TiO2 Nanocomposites
Ahmad Zohrevand et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Experimental study of the melt fracture behavior of filled high-density polyethylene melts
Francesco Baldi et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Evaluate the Nonlinear Viscoelasticity of Polyolefin Melts Using the Larson Model
Gwo-Geng Lin et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Recyclability of Polyethylene/Polypropylene Binary Blends and Enhancement of Their Mechanical Properties by Reinforcement with Glass Fiber
Emel Kuram et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2014)
Recyclability assessment of nano-reinforced plastic packaging
C. Sanchez et al.
WASTE MANAGEMENT (2014)
On the role of twinning in solid-state reactions
M. Sh Akchurin et al.
CRYSTALLOGRAPHY REPORTS (2013)
Polyolefin composites with natural fibers and wood-modification of the fiber/filler-matrix interaction
L. Sobczak et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Mechanochemical degradation of the crosslinked and foamed EVA multicomponent and multiphase waste material for resource application
Can-pei Liu et al.
POLYMER DEGRADATION AND STABILITY (2013)
Experimental study of preform reheat temperature in two-stage injection stretch blow molding
B. Demirel et al.
POLYMER ENGINEERING AND SCIENCE (2013)
The effect of recycled polymer addition on the thermorheological behavior of modified lubricating greases
J. E. Martin-Alfonso et al.
POLYMER ENGINEERING AND SCIENCE (2013)
Synthesis of silver nanoparticles in electrospun polyacrylonitrile nanofibers using tea polyphenols as the reductant
MeiLing Zou et al.
POLYMER ENGINEERING AND SCIENCE (2013)
Synthesis, Characterization, Biological Activity, and Thermal Stability of New Styrenic Polymer Having Pendant Ketone and Its Some Derivatives
Ibrahim Erol et al.
POLYMER ENGINEERING AND SCIENCE (2013)
Recycling of Thermoset Polyurethane Foams
Fabrizio Quadrini et al.
POLYMER ENGINEERING AND SCIENCE (2013)
Estimation of tensile strength of inorganic plate-like particulate reinforced polymer composites
Ji-Zhao Liang
POLYMER ENGINEERING AND SCIENCE (2013)
Surface-modified talc particles by acetoxy groups grafting: Effects on mechanical properties of polypropylene/talc composites
Luciana A. Castillo et al.
POLYMER ENGINEERING AND SCIENCE (2013)
Silica as a morphogenetically active inorganic polymer
Werner E. G. Mueller et al.
BIOMATERIALS SCIENCE (2013)
Grafting effects of polypropylene/polyethylene blends with maleic anhydride on the properties of the resulting wood-plastic composites
Hua Gao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Valorizing mixed plastic wastes from cardboard recycling by amendment with wood, cement and ash
T. Sardot et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Application to refrigerator plastics by mechanical recycling from polypropylene in waste-appliances
Kyung Ho Ha et al.
MATERIALS & DESIGN (2012)
Effect of Electron Beam Irradiation on the Mechanical, Thermal, and Dynamic Mechanical Properties of Flyash and Nanostructured Fly Ash Waste Polyethylene Hybrid Composites
Sukanya Satapathy et al.
POLYMER COMPOSITES (2012)
The effect of extensive mechanical recycling on the properties of low density polyethylene
Huiying Jin et al.
POLYMER DEGRADATION AND STABILITY (2012)
Annealing-Induced Structural Rearrangement and its Toughening Effect in Injection-Molded Isotactic Polypropylene
Bing Na et al.
POLYMER ENGINEERING AND SCIENCE (2012)
Optimization of froth flotation procedure for poly(ethylene terephthalate) recycling industry
M. Teresa Carvalho et al.
POLYMER ENGINEERING AND SCIENCE (2012)
Bubble development in a polymeric resin under vacuum
In Hwan Sul et al.
POLYMER ENGINEERING AND SCIENCE (2012)
Characterization and thermal-oxidative degradation behavior of poly(ethylene terephthalate-co-4,4'-bibenzoate) prepared via direct esterification technique
Junming Dai et al.
POLYMER ENGINEERING AND SCIENCE (2012)
RECYCLING AND RECOVERY OF POST-CONSUMER PLASTIC SOLID WASTE IN A EUROPEAN CONTEXT
Anke Brems et al.
THERMAL SCIENCE (2012)
Experimental investigation of the quality characteristics of agricultural plastic wastes regarding their recycling and energy recovery potential
D. Briassoulis et al.
WASTE MANAGEMENT (2012)
Stability of model recycled mixed plastic waste compatibilised with a cooperative compatibilisation system
S. E. Luzuriaga et al.
POLYMER DEGRADATION AND STABILITY (2011)
Study of the degradation mechanisms of polyethylene during reprocessing
A. A. Mendes et al.
POLYMER DEGRADATION AND STABILITY (2011)
Electrically Conducting Polypropylene/Polyaniline-grafted-Short Glass Fiber Composites: Microstructure and Dynamic Mechanical Analysis
Cintya Valerio-Cardenas et al.
POLYMER ENGINEERING AND SCIENCE (2011)
Processing and Characterization of Recycled Poly(ethylene terephthalate) Blends With Chain Extenders, Thermoplastic Elastomer, and/or Poly(butylene adipate-co-terephthalate)
Yottha Srithep et al.
POLYMER ENGINEERING AND SCIENCE (2011)
Control of the Migration Behavior of Slip Agents in Polyolefin-Based Films
Cosme Llop et al.
POLYMER ENGINEERING AND SCIENCE (2011)
Effect of Nanoclay Addition on the Foaming Behavior of Linear Polypropylene-Based Soft Thermoplastic Polyolefin Foam Blown in Continuous Extrusion
Wentao Zhai et al.
POLYMER ENGINEERING AND SCIENCE (2011)
Elastomer modified polypropylene-polyethylene blends as matrices for wood flour-plastic composites
Craig Clemons
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Silane coupling agents used for natural fiber/polymer composites: A review
Yanjun Xie et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Feasibility study of use of recycled High Density Polyethylene and multi response optimization of injection moulding parameters using combined grey relational and principal component analyses
Zahid A. Khan et al.
MATERIALS & DESIGN (2010)
Thermomechanical Properties of Virgin and Recycled Polypropylene Impact Copolymer/CaCO3 Nanocomposites
A. Elloumi et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Preparation and Characterization of High-Temperature Resistance Polyimide Foams
Ling-Ying Pan et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Phase Morphology Development in a Low Interfacial Tension Immiscible Polyolefin Blend During Die Extrusion and Melt Spinning
Jinhai Yang et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Thermoplastic elastomers from waste polyethylene and reclaim rubber blends and their composites with fly ash
Sukanya Satapathy et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2010)
A review of mechanochemistry applications in waste management
Xiuying Guo et al.
WASTE MANAGEMENT (2010)
Harakeke (phormium tenax) fibre-waste plastics blend composites processed by screwless extrusion
Krishnan Jayaraman et al.
COMPOSITES PART B-ENGINEERING (2009)
Mechanochemistry: the varied applications of mechanical bond-breaking
Gerd Kaupp
CRYSTENGCOMM (2009)
Mineral Filler Reinforcement for Commingled Recycled-Plastic Materials
H. D. Putra et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Evolution of Rheological Properties and Morphology Development During Crosslinking of Polyolefin Elastomers and Their TPV Blends With Polypropylene
Zuning Li et al.
POLYMER ENGINEERING AND SCIENCE (2009)
Adhesion Control for Injection Overmolding of Polypropylene With Elastomeric Ethylene Copolymers
Marco Dondero et al.
POLYMER ENGINEERING AND SCIENCE (2009)
Rheological and Molecular Properties of Organic Peroxide Induced Long Chain Branching of Recycled and Virgin High Density Polyethylene Resin
H. B. Parmar et al.
POLYMER ENGINEERING AND SCIENCE (2009)
Recycling and recovery routes of plastic solid waste (PSW): A review
S. M. Al-Salem et al.
WASTE MANAGEMENT (2009)
Examination of the possibility of recycling and utilizing recycled polyethylene and polypropylene
Cemal Meran et al.
MATERIALS & DESIGN (2008)
Biaxial yielding of polypropylene/elastomeric polyolefin blends: Effect of elastomer content and thermal annealing
Laura A. Fasce et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Anomalous mechanical behavior upon recycling of poly(phenylene-ether)-based thermoplastic elastomer
Samik Gupta et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Properties of recycled material containing poly(vinyl chloride), polypropylene, and calcium carbonate nanofiller
Branka Andricic et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Ultrasound aided extrusion process for preparation of polyolefin-clay nanocomposites
Sergey Lapshin et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Production and characterization of membranes of recycled waste materials: Cellulose acetate, obtained from sugarcane bagasse with polystyrene from plastics cups
Carla da Silva Meireles et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Thermal degradation, mechanical properties and morphology of wheat straw flour filled recycled thermoplastic composites
Fatih Mengeloglu et al.
SENSORS (2008)
Modification of mechanical properties of recycled polypropylene from post-consumer containers
P. Brachet et al.
WASTE MANAGEMENT (2008)
Blends of HDPE wastes: Study of the properties
M. Sanchez-Soto et al.
WASTE MANAGEMENT (2008)
The effect of recycling on LDPE foamability: Elongational rheology
Eddy Twite Kabamba et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Triboelectrostatic separation of covering plastics in chopped waste electric wire
Chul-Hyun Park et al.
POLYMER ENGINEERING AND SCIENCE (2007)
Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)
D. S. Achilias et al.
JOURNAL OF HAZARDOUS MATERIALS (2007)
Eco-plastics: Morphological and mechanical properties of recycled poly(carbonate)-crushed rubber (rPC-CR) blends
K. Zribi et al.
POLYMER ENGINEERING AND SCIENCE (2007)
Effect of a poly(dimethylsiloxane) modified polyolefin additive on the processing and surface properties of LLDPE
S.-H. Zhu et al.
POLYMER ENGINEERING AND SCIENCE (2007)
Polymer composites with cellulose microfibrils
Denis Mihaela Panaitescu et al.
POLYMER ENGINEERING AND SCIENCE (2007)
Degradation of polypropylene (PP) during multiple extrusions: Thermal analysis, mechanical properties and analysis of variance
Helson M. da Costa et al.
POLYMER TESTING (2007)
Effect of the additive level and of the processing temperature on the re-building of post-consumer pipes from polyethylene blends
R. Scaffaro et al.
EUROPEAN POLYMER JOURNAL (2007)
Rheological, thermal, and morphological properties of blends based on poly(propylene), ethylene propylene rubber, and ethylene-1-octene copolymer that could result from end of life vehicles: Effect of maleic anhydride grafted poly(propylene)
Mohamed Jaziri et al.
POLYMER ENGINEERING AND SCIENCE (2007)
Structure and properties of in situ compatibilized polystyrene/polyolefin elastomer blends
Zhenghong Guo et al.
POLYMER ENGINEERING AND SCIENCE (2007)
Preparation and properties of recycled HDPE/clay hybrids
Yong Lei et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Preparation and properties of recycled HDPE/natural fiber composites
Yong Lei et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Effect of organoclay content on the rheology, morphology, and physical properties of polyolefin elastomers and their blends with polypropylene
Jeremy R. Austin et al.
POLYMER ENGINEERING AND SCIENCE (2006)
Recycling poly(ethylene terephtalate) wastes: Properties of poly(ethylene terephtalate)/polycarbonate blends and the effect of a transesterification catalyst
Souad Mbarek et al.
POLYMER ENGINEERING AND SCIENCE (2006)
Thermal degradation of polyethylene film materials due to successive recycling
R. Marsh et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2006)
Addition compatibilization of PP/PS blends by Tailor-made copolymers
IF Díaz et al.
POLYMER ENGINEERING AND SCIENCE (2006)
Rheological and mechanical properties of LDPE/HDPE blends
Gautam Sarkhel et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2006)
Thermal strategy for the separation of a polymer mixture
T Saito et al.
POLYMER ENGINEERING AND SCIENCE (2005)
Rheological behavior comparison between PET/HDPE and PC/HDPE microfibrillar blends
HS Xu et al.
POLYMER ENGINEERING AND SCIENCE (2005)
Morphology and mechanical properties of poly (phenylene sulfide)/isotactic polypropylene in situ microfibrillar blends
H Quan et al.
POLYMER ENGINEERING AND SCIENCE (2005)
Tensile and impact behavior of polypropylene/low density polyethylene blends
R Strapasson et al.
POLYMER TESTING (2005)
Recycling of PVC/PU waste and reuse in PVC formulations: structure-property relationship
O Grigoryeva et al.
POLYMER ENGINEERING AND SCIENCE (2005)
Constitutive equation of peroxide cross-linking of thermoplastic polyolefin rubbers
D Bacci et al.
POLYMER ENGINEERING AND SCIENCE (2005)
Rheological properties of polypropylene during multiple extrusion
HM da Costa et al.
POLYMER TESTING (2005)
The effect of paraffin on fiber dispersion and mechanical properties of polyolefin-sawdust composites
A Viksne et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Relationship between cell morphology and impact strength of microcellular foamed high-density polythylene/polypropylene blends
P Rachtanapun et al.
POLYMER ENGINEERING AND SCIENCE (2004)
Sub-micron dispersed-phase particle size in polymer blends: overcoming the Taylor limit via solid-state shear pulverization
AH Lebovitz et al.
POLYMER (2003)
High-energy mechanical alloying of thermoplastic polymers in carbon dioxide
F Cavalieri et al.
POLYMER (2002)
Effects of recycling on the microstructure and the mechanical properties of isotactic polypropylene
J Aurrekoetxea et al.
JOURNAL OF MATERIALS SCIENCE (2001)