相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Highly Crystalline Low Band Gap Polymer Based on Thieno[3,4-c]pyrrole-4,6-dione for High-Performance Polymer Solar Cells with a >400 nm Thick Active Layer
Jae Woong Jung et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Optimizing Light-Harvesting Polymers via Side Chain Engineering
Peng Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Wide-Bandgap Benzodithiophene-Benzothiadiazole Copolymers for Highly Efficient Multijunction Polymer Solar Cells
Chunhui Duan et al.
ADVANCED MATERIALS (2015)
Small-Bandgap Polymer Solar Cells with Unprecedented Short-Circuit Current Density and High Fill Factor
Hyosung Choi et al.
ADVANCED MATERIALS (2015)
Recent Advances in Bulk Heterojunction Polymer Solar Cells
Luyao Lu et al.
CHEMICAL REVIEWS (2015)
Polymer Solar Cells Based on the Copolymers of Naphtho[1,2-c:5,6-c]bis(1,2,5-thiadiazole) and Alkoxylphenyl Substituted Benzodithiophene with High Open-Circuit Voltages
Liqian Liu et al.
CHINESE JOURNAL OF CHEMISTRY (2015)
Enhanced efficiency of polymer solar cells by adding a high-mobility conjugated polymer
Shenghua Liu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%
Abd. Rashid bin Mohd Yusoff et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Effect of Fluorination of 2,1,3-Benzothiadiazole
Christian B. Nielsen et al.
JOURNAL OF ORGANIC CHEMISTRY (2015)
A New Tetracyclic Lactam Building Block for Thick, Broad-Bandgap Photovoltaics (vol 136, pg 11578, 2014)
Renee Kroon et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Chalcogenophene Comonomer Comparison in Small Band Gap Diketopyrrolopyrrole-Based Conjugated Polymers for High-Performing Field-Effect Transistors and Organic Solar Cells
Raja Shahid Ashraf et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Conjugated Polymer-Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells
Jianqi Zhang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
A Series of Simple Oligomer-like Small Molecules Based on Oligothiophenes for Solution-Processed Solar Cells with High Efficiency
Bin Kan et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Status and prospects for ternary organic photovoltaics
Luyao Lu et al.
NATURE PHOTONICS (2015)
Efficient inverted polymer solar cells employing favourable molecular orientation
Varun Vohra et al.
NATURE PHOTONICS (2015)
Single-junction polymer solar cells with high efficiency and photovoltage
Zhicai He et al.
NATURE PHOTONICS (2015)
Backbone orientation in semiconducting polymers
Itaru Osaka et al.
POLYMER (2015)
Synthesis of two-dimensional π-conjugated polymers pendent with benzothiadiazole and naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole moieties for polymer solar cells
Wei Li et al.
SCIENCE CHINA-CHEMISTRY (2015)
Realizing over 10% efficiency in polymer solar cell by device optimization
Shaoqing Zhang et al.
SCIENCE CHINA-CHEMISTRY (2015)
A molecular nematic liquid crystalline material for high-performance organic photovoltaics
Kuan Sun et al.
NATURE COMMUNICATIONS (2015)
A real-time study of the benefits of co-solvents in polymer solar cell processing
Jacobus J. van Franeker et al.
NATURE COMMUNICATIONS (2015)
Charge-Carrier Mobility Requirements for Bulk Heterojunction Solar Cells with High Fill Factor and External Quantum Efficiency >90%
Jonathan A. Bartelt et al.
ADVANCED ENERGY MATERIALS (2015)
Dramatic performance enhancement for large bandgap thick-film polymer solar cells introduced by a difluorinated donor unit
Zhengke Li et al.
NANO ENERGY (2015)
Highly Efficient Tandem Polymer Solar Cells with a Photovoltaic Response in the Visible Light Range
Zhong Zheng et al.
ADVANCED MATERIALS (2015)
Synergistic Effect of Polymer and Small Molecules for High-Performance Ternary Organic Solar Cells
Yajie Zhang et al.
ADVANCED MATERIALS (2015)
Single-Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency
Jing-De Chen et al.
ADVANCED MATERIALS (2015)
Small-molecule solar cells with efficiency over 9%
Qian Zhang et al.
NATURE PHOTONICS (2015)
Efficient, Large Area, and Thick Junction Polymer Solar Cells with Balanced Mobilities and Low Defect Densities
Ardalan Armin et al.
ADVANCED ENERGY MATERIALS (2015)
Design and Synthesis of Molecular Donors for Solution-Processed High-Efficiency Organic Solar Cells
Jessica E. Coughlin et al.
ACCOUNTS OF CHEMICAL RESEARCH (2014)
Molecular Design toward Highly Efficient Photovoltaic Polymers Based on Two-Dimensional Conjugated Benzodithiophene
Long Ye et al.
ACCOUNTS OF CHEMICAL RESEARCH (2014)
Benzobisthiazole as Weak Donor for Improved Photovoltaic Performance: Microwave Conductivity Technique Assisted Molecular Engineering
Masashi Tsuji et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Thiophene-Thiazolothiazole Copolymers: Significant Impact of Side Chain Composition on Backbone Orientation and Solar Cell Performances
Itaru Osaka et al.
ADVANCED MATERIALS (2014)
Controlling Molecular Weight of a High Efficiency Donor-Acceptor Conjugated Polymer and Understanding Its Significant Impact on Photovoltaic Properties
Wentao Li et al.
ADVANCED MATERIALS (2014)
An Efficient Triple-Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11%
Chun-Chao Chen et al.
ADVANCED MATERIALS (2014)
25th Anniversary Article: Isoindigo- Based Polymers and Small Molecules for Bulk Heterojunction Solar Cells and Field Effect Transistors
Ergang Wang et al.
ADVANCED MATERIALS (2014)
Low Band-Gap Conjugated Polymers with Strong Interchain Aggregation and Very High Hole Mobility Towards Highly Effi cient Thick- Film Polymer Solar Cells
Zhenhui Chen et al.
ADVANCED MATERIALS (2014)
Interplay of Solvent Additive Concentration and Active Layer Thickness on the Performance of Small Molecule Solar Cells
John A. Love et al.
ADVANCED MATERIALS (2014)
Understanding Low Bandgap Polymer PTB7 and Optimizing Polymer Solar Cells Based on It
Luyao Lu et al.
ADVANCED MATERIALS (2014)
Universal Formation of Compositionally Graded Bulk Heterojunction for Efficiency Enhancement in Organic Photovoltaics
Zhengguo Xiao et al.
ADVANCED MATERIALS (2014)
A Polythiophene Derivative with Superior Properties for Practical Application in Polymer Solar Cells
Maojie Zhang et al.
ADVANCED MATERIALS (2014)
Mobility Guidelines for High Fill Factor Solution-Processed Small Molecule Solar Cells
Christopher M. Proctor et al.
ADVANCED MATERIALS (2014)
Porphyrin-Incorporated 2D D-A Polymers with Over 8.5% Polymer Solar Cell Efficiency
YI-Hsiang Chao et al.
ADVANCED MATERIALS (2014)
Top-Down Approach for Nanophase Reconstruction in Bulk Heterojunction Solar Cells
Jaemin Kong et al.
ADVANCED MATERIALS (2014)
Bulk Heterojunction Solar Cells: Morphology and Performance Relationships
Ye Huang et al.
CHEMICAL REVIEWS (2014)
Naphtho[1,2-b:5,6-b′]dithiophene Based Two-Dimensional Conjugated Polymers for Highly Efficient Thick-Film Inverted Polymer Solar Cells
Xiangwei Zhu et al.
CHEMISTRY OF MATERIALS (2014)
Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain
Long Ye et al.
CHEMISTRY OF MATERIALS (2014)
Donor-Acceptor-Type Copolymers Based on a Naphtho[1,2-c:5,6-c]bis(1,2,5-thiadiazole) Scaffold for High-Efficiency Polymer Solar Cells
Li-Qian Liu et al.
CHEMISTRY-AN ASIAN JOURNAL (2014)
Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device
T. L. Nguyen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Quantifying Charge Extraction in Organic Solar Cells: The Case of Fluorinated PCPDTBT
Steve Albrecht et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
A New Tetracyclic Lactam Building Block for Thick, Broad-Bandgap Photovoltaics
Renee Kroon et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Silaindacenodithiophene-Based Molecular Donor: Morphological Features and Use in the Fabrication of Compositionally Tolerant, High-Efficiency Bulk Heterojunction Solar Cells
John A. Love et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Solution-Processed Organic Solar Cells Based on Dialkylthiol-Substituted Benzodithiophene Unit with Efficiency near 10%
Bin Kan et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Mobility-Controlled Performance of Thick Solar Cells Based on Fluorinated Copolymers
Wentao Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Thick junction broadband organic photodiodes
Ardalan Armin et al.
LASER & PHOTONICS REVIEWS (2014)
The influence of molecular orientation on organic bulk heterojunction solar cells
John R. Tumbleston et al.
NATURE PHOTONICS (2014)
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Yuhang Liu et al.
NATURE COMMUNICATIONS (2014)
Improving Structural Order for a High-Performance Diketopyrrolopyrrole-Based Polymer Solar Cell with a Thick Active Layer
Jing Gao et al.
ADVANCED ENERGY MATERIALS (2014)
Understanding the Morphology of PTB7: PCBM Blends in Organic Photovoltaics
Feng Liu et al.
ADVANCED ENERGY MATERIALS (2014)
Balanced Carrier Mobilities: Not a Necessary Condition for High-Efficiency Thin Organic Solar Cells as Determined by MIS- CELIV
Ardalan Armin et al.
ADVANCED ENERGY MATERIALS (2014)
High-Performance Inverted Organic Photovoltaics with Over 1-μm Thick Active Layers
Xiaowen Hu et al.
ADVANCED ENERGY MATERIALS (2014)
Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film as Cathode Interlayer
Sih-Hao Liao et al.
SCIENTIFIC REPORTS (2014)
Boosting photovoltaic performance of a benzobisthiazole based copolymer: a device approach using a zinc oxide electron transport layer
Akinori Saeki et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
High Performance Photovoltaic Applications Using Solution-Processed Small Molecules
Yongsheng Chen et al.
ACCOUNTS OF CHEMICAL RESEARCH (2013)
Fluorinated Polymer Yields High Organic Solar Cell Performance for a Wide Range of Morphologies
John R. Tumbleston et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Letian Dou et al.
ADVANCED MATERIALS (2013)
Efficient Small Bandgap Polymer Solar Cells with High Fill Factors for 300 nm Thick Films
Weiwei Li et al.
ADVANCED MATERIALS (2013)
Recent advances in water/alcohol-soluble π-conjugated materials: new materials and growing applications in solar cells
Chunhui Duan et al.
CHEMICAL SOCIETY REVIEWS (2013)
Development of Large Band-Gap Conjugated Copolymers for Efficient Regular Single and Tandem Organic Solar Cells
Kai Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Predicting Morphologies of Solution Processed Polymer:Fullerene Blends
Sandra Kouijzer et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Fluorinated Benzothiadiazole-Based Conjugated Polymers for High-Performance Polymer Solar Cells without Any Processing Additives or Post-treatments
Ning Wang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Efficient Tandem and Triple-Junction Polymer Solar Cells
Weiwei Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Fluorine Substituents Reduce Charge Recombination and Drive Structure and Morphology Development in Polymer Solar Cells
Andrew C. Stuart et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Naphthodithiophene-Naphthobisthiadiazole Copolymers for Solar Cells: Alkylation Drives the Polymer Backbone Flat and Promotes Efficiency
Itaru Osaka et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Integrated Materials Design of Organic Semiconductors for Field-Effect Transistors
Jianguo Mei et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Controlling Conformations of Conjugated Polymers and Small Molecules: The Role of Nonbonding Interactions
Nicholas E. Jackson et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Linear Side Chains in Benzo[1,2-b:4,5-b′]dithiophene-Thieno[3,4-c]pyrrole-4,6-dione Polymers Direct Self-Assembly and Solar Cell Performance
Clement Cabanetos et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Design and Synthesis of Copolymers of Indacenodithiophene and Naphtho[1,2-c:5,6-c]bis(1,2,5-thiadiazole) for Polymer Solar Cells
Ming Wang et al.
MACROMOLECULES (2013)
Synthesis of 5H-Dithieno[3,2-b:2′,3′-d]pyran as an Electron-Rich Building Block for Donor-Acceptor Type Low-Bandgap Polymers
Letian Dou et al.
MACROMOLECULES (2013)
Polymer solar cells with enhanced fill factors
Xugang Guo et al.
NATURE PHOTONICS (2013)
Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics
Feng Liu et al.
PROGRESS IN POLYMER SCIENCE (2013)
The Importance of Fullerene Percolation in the Mixed Regions of Polymer-Fullerene Bulk Heterojunction Solar Cells
Jonathan A. Bartelt et al.
ADVANCED ENERGY MATERIALS (2013)
Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells
Brian A. Collins et al.
ADVANCED ENERGY MATERIALS (2013)
Molecular Design of Photovoltaic Materials for Polymer Solar Cells: Toward Suitable Electronic Energy Levels and Broad Absorption
Yongfang Li
ACCOUNTS OF CHEMICAL RESEARCH (2012)
Silaindacenodithiophene-Based Low Band Gap Polymers - The Effect of Fluorine Substitution on Device Performances and Film Morphologies
Bob C. Schroeder et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Stability of Polymer Solar Cells
Mikkel Jorgensen et al.
ADVANCED MATERIALS (2012)
Semiconducting π-Conjugated Systems in Field-Effect Transistors: A Material Odyssey of Organic Electronics
Chengliang Wang et al.
CHEMICAL REVIEWS (2012)
Conjugated Side-Chain-Isolated D-A Copolymers Based on Benzo[1,2-b:4,5-b′]dithiophene-alt-dithienylbenzotriazole: Synthesis and Photovoltaic Properties
Jie Min et al.
CHEMISTRY OF MATERIALS (2012)
High efficiency polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct with solvent additive
Xia Guo et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte
Tingbin Yang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells
Hin-Lap Yip et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Recent development of push-pull conjugated polymers for bulk-heterojunction photovoltaics: rational design and fine tailoring of molecular structures
Chunhui Duan et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Understanding the Thickness-Dependent Performance of Organic Bulk Heterojunction Solar Cells: The Influence of Mobility, Lifetime, and Space Charge
Thomas Kirchartz et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2012)
On the morphology of polymer-based photovoltaics
Feng Liu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2012)
Multiple Functionalities of Polyfluorene Grafted with Metal Ion-Intercalated Crown Ether as an Electron Transport Layer for Bulk-Heterojunction Polymer Solar Cells: Optical Interference, Hole Blocking, Interfacial Dipole, and Electron Conduction
Sih-Hao Liao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Fluorinated Copolymer PCPDTBT with Enhanced Open-Circuit Voltage and Reduced Recombination for Highly Efficient Polymer Solar Cells
Steve Albrecht et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Rational Design of High Performance Conjugated Polymers for Organic Solar Cells
Huaxing Zhou et al.
MACROMOLECULES (2012)
Roll-to-roll fabrication of polymer solar cells
Roar Sondergaard et al.
MATERIALS TODAY (2012)
Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer
Letian Dou et al.
NATURE PHOTONICS (2012)
Optimum mobility, contact properties, and open-circuit voltage of organic solar cells: A drift-diffusion simulation study
Wolfgang Tress et al.
PHYSICAL REVIEW B (2012)
Influence of Hole-Transport Layers and Donor Materials on Open-Circuit Voltage and Shape of I-V Curves of Organic Solar Cells
Wolfgang Tress et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
P3HT:PCBM, Best Seller in Polymer Photovoltaic Research
Minh Trung Dang et al.
ADVANCED MATERIALS (2011)
Bulk heterojunction solar cells with thick active layers and high fill factors enabled by a bithiophene-co-thiazolothiazole push-pull copolymer
J. Peet et al.
APPLIED PHYSICS LETTERS (2011)
Investigation of defects by admittance spectroscopy measurements in poly (3-hexylthiophene):(6,6)-phenyl C61-butyric acid methyl ester organic solar cells degraded under air exposure
Samira Khelifi et al.
JOURNAL OF APPLIED PHYSICS (2011)
Molecular Design and Ordering Effects in π-Functional Materials for Transistor and Solar Cell Applications
Pierre M. Beaujuge et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Donor Acceptor Conjugated Polymer Based on Naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for High-Performance Polymer Solar Cells
Ming Wang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Fluorine Substituted Conjugated Polymer of Medium Band Gap Yields 7% Efficiency in Polymer-Fullerene Solar Cells
Samuel C. Price et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Synthesis of Fluorinated Polythienothiophene-co-benzodithiophenes and Effect of Fluorination on the Photovoltaic Properties
Hae Jung Son et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Tailoring organic heterojunction interfaces in bilayer polymer photovoltaic devices
Akira Tada et al.
NATURE MATERIALS (2011)
High Efficiency Polymer Solar Cells with Long Operating Lifetimes
Craig H. Peters et al.
ADVANCED ENERGY MATERIALS (2011)
A New Class of Semiconducting Polymers for Bulk Heterojunction Solar Cells with Exceptionally High Performance
Yongye Liang et al.
ACCOUNTS OF CHEMICAL RESEARCH (2010)
Nanomorphology and Charge Generation in Bulk Heterojunctions Based on Low-Bandgap Dithiophene Polymers with Different Bridging Atoms
Mauro Morana et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Influence of the Bridging Atom on the Performance of a Low-Bandgap Bulk Heterojunction Solar Cell
Markus C. Scharber et al.
ADVANCED MATERIALS (2010)
Polymer Photovoltaics with Alternating Copolymer/Fullerene Blends and Novel Device Architectures
Olle Inganas et al.
ADVANCED MATERIALS (2010)
Polymer-Fullerene Bulk-Heterojunction Solar Cells
Christoph J. Brabec et al.
ADVANCED MATERIALS (2010)
For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%
Yongye Liang et al.
ADVANCED MATERIALS (2010)
Organic solar cells with submicron-thick polymer:fullerene bulk heterojunction films
Seungsoo Lee et al.
APPLIED PHYSICS LETTERS (2010)
Effects of active layer thickness and thermal annealing on polythiophene: Fullerene bulk heterojunction photovoltaic devices
Lichang Zeng et al.
APPLIED PHYSICS LETTERS (2010)
Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing
Frederik C. Krebs et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
A Review on the Development of the Inverted Polymer Solar Cell Architecture
Steven K. Hau et al.
POLYMER REVIEWS (2010)
Thickness dependence and solution-degradation effect in poly (3-hexylthiophene):phenyl-C61-butyric acid methyl ester based solar cells
Hui Jin et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
Development of Novel Conjugated Donor Polymers for High-Efficiency Bulk-Heterojunction Photovoltaic Devices
Junwu Chen et al.
ACCOUNTS OF CHEMICAL RESEARCH (2009)
Recent Progress in Polymer Solar Cells: Manipulation of Polymer: Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells
Li-Min Chen et al.
ADVANCED MATERIALS (2009)
Polymer-Fullerene Bulk-Heterojunction Solar Cells
Gilles Dennler et al.
ADVANCED MATERIALS (2009)
Determination of gap defect states in organic bulk heterojunction solar cells from capacitance measurements
Pablo P. Boix et al.
APPLIED PHYSICS LETTERS (2009)
Organic tandem solar cells: A review
Tayebeh Ameri et al.
ENERGY & ENVIRONMENTAL SCIENCE (2009)
Coupled optoelectronic simulation of organic bulk-heterojunction solar cells: Parameter extraction and sensitivity analysis
R. Haeusermann et al.
JOURNAL OF APPLIED PHYSICS (2009)
Highly Efficient Solar Cell Polymers Developed via Fine-Tuning of Structural and Electronic Properties
Yongye Liang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Polymer solar cells with enhanced open-circuit voltage and efficiency
Hsiang-Yu Chen et al.
NATURE PHOTONICS (2009)
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Sung Heum Park et al.
NATURE PHOTONICS (2009)
Efficient Organic p-i-n Solar Cells Having Very Thick Codeposited i-Layer Consisting of Highly Purified Organic Semiconductors
Kazuya Sakai et al.
MOLECULAR CRYSTALS AND LIQUID CRYSTALS (2008)
Inverse relation between photocurrent and absorption layer thickness in polymer solar cells
Harald Hoppe et al.
PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2007)
The effect of active layer thickness and composition on the performance of bulk-heterojunction solar cells
Adam J. Moule et al.
JOURNAL OF APPLIED PHYSICS (2006)
Charge transport and photocurrent generation in poly (3-hexylthiophene): Methanofullerene bulk-heterojunction solar cells
VD Mihailetchi et al.
ADVANCED FUNCTIONAL MATERIALS (2006)
A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene: fullerene solar cells
Y Kim et al.
NATURE MATERIALS (2006)
Device model for the operation of polymer/fullerene bulk heterojunction solar cells
LJA Koster et al.
PHYSICAL REVIEW B (2005)
Electron transport in a methanofullerene
VD Mihailetchi et al.
ADVANCED FUNCTIONAL MATERIALS (2003)
Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors
P Schilinsky et al.
APPLIED PHYSICS LETTERS (2002)