Electrode performance and analysis of reversible solid oxide fuel cells with proton conducting electrolyte of BaCe0.5Zr0.3Y0.2O3-δ

Reversible solid oxide fuel cells (R-SOFCs) are regarded as a promising solution to the discontinuity in electric energy, since they can generate electric powder as solid oxide fuel cells (SOFCs) at the time of electricity shortage, and store the electrical power as solid oxide electrolysis cells (SOECs) at the time of electricity over-plus. In this work, R-SOFCs with thin proton conducting electrolyte films of BaCe0.5Zr0.3Y0.2O3-delta were fabricated and their electro-performance was characterized with various reacting atmospheres. At 700 degrees C, the charging current (in SOFC mode) is 251 mA cm(-2) at 0.7 V, and the electrolysis current densities (in SOEC mode) reaches -830 mA cm(-2) at 1.5 V with 50% H2O-air and H-2 as reacting gases, respectively. Their electrode performance was investigated by impedance spectra in discharging mode (SOFC mode), electrolysis mode (SOEC mode) and open circuit mode (OCV mode). The results show that impedance spectra have different shapes in all the three modes, implying different rate-limiting steps. In SOFC mode, the high frequency resistance (R-H) is 0.07 Omega cm(2) and low frequency resistances (R-L) are 0.37 Omega cm(2). While in SOEC mode, R-H is 0.15 Omega cm(2), twice of that in SOFC mode, and R-L is only 0.07 Omega cm(2), about 19% of that in SOFC mode. Moreover, the spectra under OCV conditions seems like a combination of those in SOEC mode and SOFC mode, since that R-H in OCV mode is about 0.13 Omega cm(2), close to R-H in SOEC mode. while R-L in OCV mode is 0.39 Omega cm(2), close to R-L in SOFC mode. The elementary steps for SOEC with proton conducting electrolyte were proposed to account for this phenomenon. (C) 2009 Elsevier B.V. All rights reserved.