相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Interface evaluation in the ternary blends of HDPE/PA-6/EVOH
Mohammad Reza Saeb et al.
POLYMER BULLETIN (2014)
Optical properties of polymer blends composed of poly(methyl methacrylate) and ethylene-vinyl acetate copolymer
Shuji Takahashi et al.
EUROPEAN POLYMER JOURNAL (2012)
Morphology Prediction in HDPE/PA-6/EVOH Ternary Blends: Defining the Role of Elasticity Ratio
Mohammad Reza Saeb et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2012)
Effect of EVOH on the morphology, mechanical and barrier properties of PA6/POE-g-MAH/EVOH ternary blends
Biaobing Wang et al.
MATERIALS & DESIGN (2012)
Characterization of PA6/EPDM-g-MA/HDPE ternary blends: The role of core-shell structure
Lan-peng Li et al.
POLYMER (2012)
3D porous polymeric conductive material prepared using LbL deposition
Sepehr Ravati et al.
POLYMER (2011)
Ultraporous poly(L-lactide) scaffolds prepared with quaternary immiscible polymer blends modified by copolymer brushes at the interface
Nick Virgilio et al.
POLYMER (2011)
Morphology and continuity development in highly reactive nanoscale polymer blends
Prashant A. Bhadane et al.
POLYMER (2011)
Deformation and fracture of polystyrene/polypropylene blends: A simulation study
Shengwei Deng et al.
POLYMER (2011)
Nanodroplet formation and exclusive homogenously nucleated crystallization in confined electrospun immiscible polymer blend fibers of polystyrene and poly(ethylene oxide)
Ganji Zhong et al.
POLYMER (2011)
Towards ultraporous poly(L-lactide) scaffolds from quaternary immiscible polymer blends
N. Virgilio et al.
BIOMATERIALS (2010)
Low percolation threshold conductive device derived from a five-component polymer blend
Sepehr Ravati et al.
POLYMER (2010)
Morphology of polystyrene/poly(dimethyl siloxane) blends compatibilized with star polymers containing a γ-cyclodextrin core and polystyrene arms
Brad J. Busche et al.
POLYMER (2010)
Morphological states for a ternary polymer blend demonstrating complete wetting
Sepehr Ravati et al.
POLYMER (2010)
Multiple melting behaviour of annealed crystalline polymers
Gui-Fang Shan et al.
POLYMER TESTING (2010)
In Situ Measure of Interfacial Tensions in Ternary and Quaternary Immiscible Polymer Blends Demonstrating Partial Wetting
Nick Virgilio et al.
MACROMOLECULES (2009)
The effect of interfacial adhesion on the impact strength of immiscible PP/PETG blends compatibilized with triblock copolymers
Xinlan Zhang et al.
POLYMER (2009)
New polypropylene blends toughened by polypropylene/poly(ethylene-co-propylene) in-reactor alloy: Compositional and morphological influence on mechanical properties
Rongbo Li et al.
POLYMER (2009)
A review on ternary immiscible polymer blends: morphology and effective parameters
Shirin Shokoohi et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2009)
Polyamide 66/EPR-g-MA blends: mechanical modeling and kinetic analysis of thermal degradation
Arup Choudhury et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2008)
Fractionated crystallization in PA6/ABS blends: Influence of a reactive compatibilizer and multiwall carbon nanotubes
Suryasarathi Bose et al.
POLYMER (2007)
Gasoline permeation resistance of polypropylene, polypropylene/ethylene vinyl alcohol, polypropylene/modified polyamide, and polypropylene/blends of modified polyamide and ethylene vinyl alcohol containers
Jen-Taut Yeh et al.
JOURNAL OF POLYMER RESEARCH (2006)
Study of morphologies of PMMA/PP/PS ternary blends
TS Valera et al.
MACROMOLECULES (2006)
Barrier resistance of polyethylene, polyethylene/modified polyamide, and polyethylene/blends of modified polyamide and ethylene vinyl alcohol bottles against permeation of polar and nonpolar mixed solvents
JT Yeh et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
Fractionated crystallization of compatibilized LDPE/PA6 blends
C Yordanov et al.
EUROPEAN POLYMER JOURNAL (2005)
Reactively compatibilised polyamide6/ethylene-co-vinyl acetate blends: mechanical properties and morphology
AR Bhattacharyya et al.
POLYMER (2005)
The effects of SEBS-g-maleic anhydride reaction on the morphology and properties of polypropylene/PA6/SEBS ternary blends
A Wilkinson et al.
POLYMER (2004)
Oxygen permeation resistance of polyethylene, polyethylene/ethylene vinyl alcohol copolymer, polyethylene/modified ethylene vinyl alcohol copolymer, and polyethylene/modified polyamide-ethylene vinyl alcohol copolymer bottles
JT Yeh et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Blends of poly(ε-caprolactone) and poly(vinyl acetate):: mechanical properties and thermal degradation
G Sivalingam et al.
POLYMER DEGRADATION AND STABILITY (2004)
Rheological properties and interfacial tension of polypropylene poly(styrene-co-acrylonitrile) blend containing compatibilizer
YT Sung et al.
POLYMER (2003)
Factors influencing encapsulation behavior in composite droplet-type polymer blends
J Reignier et al.
POLYMER (2003)
Cocontinuous polymer blends: influence of viscosity and elasticity ratios of the constituent polymers on phase inversion
S Steinmann et al.
POLYMER (2001)
Permeation of water, methanol, fuel and alcohol-containing fuels in high-barrier ethylene-vinyl alcohol copolymer
JM Lagaron et al.
POLYMER TESTING (2001)
Ternary polymer blend with core-shell dispersed phases:: effect of the core-forming polymer on phase morphology and mechanical properties
I Luzinov et al.
POLYMER (2000)
On the mechanical properties of co-continuous polymer blends: experimental and modelling
H Veenstra et al.
POLYMER (2000)