相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Mode II Brittle Fracture Assessment of Key-Hole Notches by Means of the Local Energy
A. R. Torabi et al.
JOURNAL OF TESTING AND EVALUATION (2016)
Coupled fracture mode of a cracked plate under anti-plane loading
Les P. Pook et al.
ENGINEERING FRACTURE MECHANICS (2015)
The effects of different boundary conditions on three-dimensional cracked discs under anti-plane loading
A. Campagnolo et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2015)
Local strain energy density to predict mode II brittle fracture in Brazilian disk specimens weakened by V-notches with end holes
A. R. Torabi et al.
MATERIALS & DESIGN (2015)
Fatigue strength of severely notched specimens made of Ti-6Al-4V under multiaxial loading
F. Berto et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
Coupled fracture mode of a cracked disc under anti-plane loading
Les P. Pook et al.
ENGINEERING FRACTURE MECHANICS (2014)
Strain energy density to assess mode II fracture in U-notched disk-type graphite plates
A. R. Torabi et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2014)
Some analytical and numerical expressions for evaluation of the critical J-integral in plates with blunt V-notches under Mode I loading
Fatemeh Noori-Azghad et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2014)
Fatigue strength of notched specimens made of 40CrMoV13.9 under multiaxial loading
F. Berto et al.
MATERIALS & DESIGN (2014)
Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches
F. Berto et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2014)
On Fracture Analysis of Cracked Graphite Components under Mixed Mode Loading
Masoud Sistaninia et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2014)
Mixed mode fracture assessment of U-notched graphite Brazilian disk specimens by means of the local energy
A. R. Torabi et al.
STRUCTURAL ENGINEERING AND MECHANICS (2014)
A comparison among some recent energy- and stress-based criteria for the fracture assessment of sharp V-notched components under Mode I loading
P. Lazzarin et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Tensile fracture in coarse-grained polycrystalline graphite weakened by a U-shaped notch
A. R. Torabi et al.
ENGINEERING FRACTURE MECHANICS (2013)
Fracture behaviour of notched round bars made of PMMA subjected to torsion at-60 degrees C
F. Berto et al.
ENGINEERING FRACTURE MECHANICS (2013)
Stress intensity factors and fatigue growth of surface cracks in notched shells and round bars: two decades of research work
Andrea Carpinteri et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)
Brittle failure of inclined key-hole notches in isostatic graphite under in-plane mixed mode loading
P. Lazzarin et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)
Surface cracks in fatigued structural components: a review
Roberto Brighenti et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)
A 50-year retrospective review of three-dimensional effects at cracks and sharp notches
L. P. Pook
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)
Investigation of Mixed Mode I/II Brittle Fracture Using ASCB Specimen
Radu Negru et al.
INTERNATIONAL JOURNAL OF FRACTURE (2013)
A review on coupled modes in V-notched plates of finite thickness: A generalized approach to the problem
F. Berto
PHYSICAL MESOMECHANICS (2013)
Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density
A. R. Torabi et al.
STRENGTH OF MATERIALS (2013)
Fatigue life assessment under a complex multiaxial load history: an approach based on damage mechanics
R. Brighenti et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2012)
An approach to calculate the J-integral by digital image correlation displacement field measurement
T. H. Becker et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2012)
A notch multiaxial-fatigue approach based on damage mechanics
Roberto Brighenti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
The fictitious notch rounding approach applied to V-notches with root holes subjected to mode I loading
Filippo Berto et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2012)
The effect of the boundary conditions on in-plane and out-of-plane stress field in three dimensional plates weakened by free-clamped V-notches
F. Berto et al.
PHYSICAL MESOMECHANICS (2012)
Experimental and Theoretical Assessment of Brittle Fracture in Engineering Components Containing a Sharp V-Notch
M. R. Ayatollahi et al.
EXPERIMENTAL MECHANICS (2011)
A numerical method for evaluation of J-integral in plates made of functionally graded materials with sharp and blunt V-notches
E. Barati et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2011)
A comparison between rapid expressions for evaluation of the critical J-integral in plates with U-notches under mode I loading
E. Barati et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2011)
Buckling and fracture behaviour of cracked thin plates under shear loading
Roberto Brighenti et al.
MATERIALS & DESIGN (2011)
Tensile fracture in notched polycrystalline graphite specimens
M. R. Ayatollahi et al.
CARBON (2010)
Rapid calculations of notch stress intensity factors based on averaged strain energy density from coarse meshes: Theoretical bases and applications
Paolo Lazzarin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Brittle fracture in rounded-tip V-shaped notches
M. R. Ayatollahi et al.
MATERIALS & DESIGN (2010)
SOME CONSIDERATIONS ON FAILURE OF SOLIDS AND LIQUIDS
R. Brighenti et al.
STRENGTH OF MATERIALS (2010)
Generalized fracture toughness for specimens with re-entrant corners: Experiments vs. theoretical predictions
Alberto Carpinteri et al.
STRUCTURAL ENGINEERING AND MECHANICS (2009)
A review of the volume-based strain energy density approach applied to V-notches and welded structures
F. Berto et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2009)
Use of J-integral to predict static failures in sharp V-notches and rounded U-notches
P. Livieri
ENGINEERING FRACTURE MECHANICS (2008)
A finite fracture mechanics approach to structures with sharp V-notches
A. Carpinteri et al.
ENGINEERING FRACTURE MECHANICS (2008)
Fracture in plates of finite thickness
A. Kotousov
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
The cohesive crack concept:: application to PMMA at-60○C
FJ Gómez et al.
ENGINEERING FRACTURE MECHANICS (2005)
Calculation of the energy J-integral for bodies with notches and cracks
YG Matvienko et al.
INTERNATIONAL JOURNAL OF FRACTURE (2004)
A fracture criterion for blunted V-notched samples
FJ Gómez et al.
INTERNATIONAL JOURNAL OF FRACTURE (2004)
A new path independent integral applied to notched components under mode I loadings
P Livieri
INTERNATIONAL JOURNAL OF FRACTURE (2003)
A fracture criterion for sharp V-notched samples
FJ Gómez et al.
INTERNATIONAL JOURNAL OF FRACTURE (2003)
Crack onset at a v-notch. Influence of the notch tip radius
D Leguillon et al.
INTERNATIONAL JOURNAL OF FRACTURE (2003)
Fracture toughness of ceramics and ceramic composites
GA Gogotsi
CERAMICS INTERNATIONAL (2003)
Fracture at V-notches with contained plasticity
M Strandberg
ENGINEERING FRACTURE MECHANICS (2002)
Strength or toughness? A criterion for crack onset at a notch
D Leguillon
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2002)
A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches
P Lazzarin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2001)
A criterion for crack nucleation at a notch in homogeneous materials
D Leguillon
COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE (2001)
Cracking in PMMA containing U-shaped notches
FJ Gómez et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2000)