4.4 Article

Metglas-Elgiloy bi-layer, stent cell resonators for wireless monitoring of viscosity and mass loading

出版社

IOP Publishing Ltd
DOI: 10.1088/0960-1317/23/2/025010

关键词

-

资金

  1. King Abdullah University of Science and Technology (KAUST, Saudi Arabia)
  2. University of Michigan

向作者/读者索取更多资源

This paper presents the design and evaluation of magnetoelastic sensors intended for wireless monitoring of tissue accumulation in peripheral artery stents. The sensors are fabricated from 28 mu m thick foils of magnetoelastic 2826MB Metglas(TM), an amorphous Ni-Fe alloy. The sensor layer consists of a frame and an active resonator portion. The frame consists of 150 mu m wide struts that are patterned in the same wishbone array pattern as a 12 mm x 1.46 mm Elgiloy stent cell. The active portion is a 10 mm long symmetric leaf shape and is anchored to the frame at mid length. The active portion nests within the stent cell, with a uniform gap separating the two. A gold-indium eutectic bonding process is used to bond Metglas(TM) and Elgiloy foils, which are subsequently patterned to form bi-layer resonators. The response of the sensor to viscosity changes and mass loading that precede and accompany artery occlusion is tested in vitro. The typical sensitivity to viscosity of the fundamental, longitudinal resonant frequency at 361 kHz is 427 ppm cP(-1) over a 1.1-8.6 cP range. The sensitivity to mass loading is typically between 63000 and 65000 ppm mg(-1) with the resonant frequency showing a reduction of 8.1% for an applied mass that is 15% of the unloaded mass of the sensor. This is in good agreement with the theoretical response.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.4
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据