Effect of OH-/Al3+ and Si/Al molar ratios on the coagulation performance and residual Al speciation during surface water treatment with poly-aluminum-silicate-chloride (PASiC)

Coagulation performance, mechanism of poly-aluminum-silicate-chloride (PASiC) and residual Al speciation in the effluent with respect to a specific surface water treatment in China were comprehensively investigated in this study. The impact of OH-/Al3+ and Si/Al molar ratios on the coagulation performance, mechanism and residual Al speciation of PASiC in surface water treatment was discussed as a function of coagulant dosage. It was intended to provide an insight into the relationship between coagulation performance and residual Al. Experimental results revealed that when OH-/Al3+ molar ratio = 2.00 and Si/Al molar ratio = 0.0500 in PASiC coagulant, PASiC exhibited beneficial coagulation property and relatively lower content of residual Al. Surface bridging and entrapment was more effective compared with charge neutralization during the specific surface water treatment. The majority of residual Al in the effluent existed in the form of insoluble suspended or particulate Al. Dissolved organically bound Al was almost the major speciation in dissolved Al and dissolved inorganically bound monomeric Al was the only component in dissolved monomeric Al. Al in PASiC remained abundant at lower dosages and residual Al concentration could be effectively reduced at the dosages of 12.0-15.0 mg/L as Al. (C) 2011 Elsevier B.V. All rights reserved.