期刊
出版社
TAYLOR & FRANCIS INC
DOI: 10.1080/10934520802597929
关键词
Malachite green; surfactant-modified alumina; adsorption isotherm; column study; regeneration; real MG bearing wastewater; Logit model
资金
- Indian Institute of Technology, Kharagpur
- University Grants Commission (UGC), New Delhi
Prepared surfactant-modified alumina (SMA) was used to remove malachite green (MG) from aqueous media. At a dose of 10 g/L, SMA removed similar to 99% MG (initial concentration 100 mg/L). The adsorption capacity (Q(max)) of SMA was 185 mg/g as calculated from Langmuir isotherm. In a fixed-bed column study, using the MG-spiked distilled water, the column design parameters were evaluated by Logit model at a bed depth of 10 cm. The adsorption rate constant (K) and adsorption capacity (N-0) was obtained as 0.002636 L/(mg h) and 76283.16 mg/L for the minimum bed depth 3.33 cm in the 1st cycle. Acetone was used for desorption of MG from SMA. In batch regeneration study, regenerated SMA could remove only similar to 80% of MG under the same experimental conditions. In column regeneration study, the efficiency of the regenerated bed decreased and the values obtained as, K = 0.007931 L/mg h and N-0 = 12341.08 mg/L for the minimum bed depth of 6.83 cm. Column study was conducted with the real MG bearing wastewater (MG concentration was 396.54 mg/L) under the same experimental condition. The value of adsorption rate constant (K) and adsorption capacity (N-0) was obtained as 0.0008786 L/(mg h) and 197939.02 mg/L, respectively for the minimum bed depth 5.92 cm.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据