Simulation of Static Performance of Air Foil Bearings Using Coupled Finite Element and Computational Fluid Dynamics Techniques

The main objective of the current work is to determine a relationship between the top and bump foil's geometry and load-carrying capacity in a journal compliant generation I air foil bearing, as well as determining the effect of the thermohydrodynamic phenomena in the performance of the air foil bearing (AFB). Static and steady-state operation is assumed throughout the analysis. A finite element model is adopted in order to investigate the operational characteristics of the specific bearing. Bump foil's elastic behavior is modeled using two node linear link spring elements. During the hydrodynamic analysis, incompressible viscous steady state Navier-Stokes equations are numerically solved, due to the low bearing compressibility number. During the thermohydrodynamic analysis, compressible, viscous, steady-state Navier-Stokes equations were solved, coupled with the energy equation. The material used during the structural analysis is Inconel X750, and it is assumed that it has linear and elastic behavior. Constant ambient pressure is applied at the free faces of the fluid as well as no slip condition at the surface of the fluid that faces the top foil. Computational fluid dynamics (CFD) and structural models are solved separately. At the beginning of the analysis, the CFD problem is solved with the assumption that the top foil has not yet been deformed. After the solution of the CFD problem, the pressure distribution at the surface of the fluid that faces the top foil is applied at the top foil and then the structural problem is solved. Consequently, the deflections of the top foil are applied on the corresponding surface of the CFD model and the algorithm continues until convergence is obtained. As soon as the converged solution for the pressure distribution is obtained, numerical integration is performed along the surface of the bearing in order to calculate its load-carrying capacity. Static bearing performance characteristics, such as pressure distribution, bump foil deflection, and load capacity are calculated and presented. Furthermore, fluid film thickness, top foil deflection, and fluid pressure are investigated as functions of the bearing angle as well as load-carrying capacity as a function of the bump and top foil stiffness. The same procedure is repeated for the thermohydrodynamic analysis. Moreover, in order to estimate the heat flux from the top foil to the bump foil channel as a function of the top foil temperature, a simple finite element model of the bump foil-cooling channel is constructed.