Qualitative analysis of dental material ingredients, composite resins and sealants using liquid chromatography coupled to quadrupole time of flight mass spectrometry

Since 2011, the World Health Organization has encouraged a global phase-down of the use of dental amalgam and actively supported the use of alternative, resin-based dental materials. The resins consist of (meth)acrylate monomers derived from Bisphenol A (BPA), such as Bisphenol A glycidyl methacrylate (BisGMA) and Bisphenol A ethoxylate methacrylate (BisEMA) or triethylene glycol dimethacrylate (TEGDMA) and urethane dimethacrylate (UDMA) which lack the BPA backbone. Besides monomers, other compounds such as photoinitiators and stabilizing agents can be present in the dental resin matrices. The current study consists in the development of an analytical method for the separation and identification of dental material components using LC-QTOF-MS. The developed method was applied on several dental material ingredients, unpolymerized composite resins, and a common dental sealant. The acquired high resolution accurate-mass data was analyzed using suspect screening with an in-house developed library. Next to the main components, various isomers and impurities related to the production of the main component have been detected and identified in the dental material ingredients. In total, 39 chemicals have been identified in the analyzed dental materials. On average 15 chemicals have been identified. Major components, such as BisEMA, BisGMA and TEGDMA were identified although they were not always stated in the material safety data sheets. Minor components included photoinitiators, such as ethyl 4-dimethyl aminobenzoate (EDMAB) and (meth)acrylates impurities originating from production of main ingredients. (C) 2018 Elsevier B.V. All rights reserved.