Chemical characterization of bio-oils using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry

The liquid product obtained via the biomass flash pyrolysis is commonly called bio-oil or pyrolysis oil. Bio-oils can be used as sources for chemicals or as fuels, primarily in mixtures or emulsions with fossil fuels. A detailed chemical characterization of bio-oil is necessary to determine its potential uses. Such characterization demands a powerful analytical technique such as comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC x GC-TOFMS). Limited chemical information can be obtained from conventional gas chromatography coupled mass spectrometry (GC-MS) because of the large number of compounds and coelutions. Thus, GC x GC-TOFMS was used for the individual identification of bio-oil components from two samples prepared via the flash pyrolysis of empty palm fruit bunch and pine wood chips. To the best of our knowledge, few papers have reported comprehensive two-dimensional gas chromatography (GC x GC) for bio-oil analysis. Many classes of compounds such as phenols, benzenediols, cyclopentenones, furanones, indanones and alkylpyridines were identified. Several coelutions present in the GC-MS were resolved using GC X GC-TOFMS. Many peaks were detected for the samples by GC-MS (similar to 166 and 129), but 631 and 857 were detected by GC x GC-TOFMS, respectively. The GC x GC-TOFMS analyses indicated that the major classes of components (analytes >0.5% relative area) in the two bio-oil samples are ketones, cyclopentenones, furanones, furans, phenols, benzenediols, methoxy- and dimethoxy-phenols and sugars. In addition, esters, aldehydes and pyridines were found for sample obtained from empty palm fruit bunch, while alcohols and cyclopentanediones were found in sample prepared from pine wood chips indicating different composition profiles due to the biomass sources. The elucidation of the composition of empty fruit bunch and pine wood chips bio-oils indicates that these oils are suitable for the production of value-added chemicals. The high quantity of phenol in the bio-oil of empty palm fruit bunch is of interest because phenol isolated from the bio-oil could provide an alternative to the phenol obtained from petroleum. The anhydrosugars found mainly in the bio-oil sample of pine wood chips can be isolated and fermented to produce ethanol or lipids. GC x GC-TOFMS can be used to increase the knowledge of the chemical composition of bio-oils allowing the improved usage of this attractive renewable energy source in bio-fuels. (C) 2012 Elsevier B.V. All rights reserved.